ISL84516IB - Low-Voltage Dual-Supply SPST Switch | Renesas
MPN: ISL84516IB ✓ פעילISL84516IB סקירה
An analog switch is a semiconductor device that routes signals between circuit nodes under digital control. The SPST designation identifies one independently selectable path, while the 1:1 configuration indicates a single signal path for each switch function. Within the broader hierarchy, the ISL84516IB is an analog switch, a discrete analog interface function, and ultimately an integrated circuit used for signal routing rather than voltage conversion.
The key benefits of the ISL84516IB include dual-supply operation from ±1.5 V to ±6 V, a specified 20 ohm on-resistance and low power consumption of 350 mW. The device family is described as a precision analog switch with excellent on-resistance flatness, making it useful when the resistance contribution of the switch must remain relatively consistent across the selected signal range. Low leakage current is another stated family characteristic relevant to battery-powered and high-impedance circuits.
The ISL84516IB belongs to the ISL84516 and ISL84517 precision analog-switch family. The ISL84516 variant provides a 1:1 switching arrangement, while the companion ISL84517 provides a different switch arrangement within the same low-voltage, dual-supply family. The IB ordering designation identifies the specific catalog configuration offered in the 8-SOIC package. Because this part operates from bipolar rails, its application circuitry must keep every driven terminal within the permitted supply range.
Typical applications include battery-powered portable instruments, low-voltage data-acquisition systems, precision analog test equipment and small-signal routing networks. The device can be paired with an ISL84516IB or ISL84517-family member where separate routing paths or complementary switching functions are required. Its low-voltage range is especially relevant to systems powered from single-cell lithium-ion batteries and rail-to-rail signal chains.
The primary design consideration is ensuring that the switch-control logic and analog signal amplitudes remain compatible with the dual supply rails. Layout should minimize parasitic capacitance around the signal pins and keep return-current paths short. Designers should also verify the on-resistance contribution against the source and destination input impedances before using the switch in precision attenuation or measurement paths.
This page combines the device's catalog identity, operating limits, package information and application guidance with practical routing considerations. It also identifies the limitation of the available substitution information: confirmed pin-to-pin alternatives require verification against the Renesas pin description and electrical characteristics before they can be treated as drop-in replacements.
חלופות תחליף ישיר עבור ISL84516IB — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
אין חלופות תואמות Drop-in עבור מוצר זה.
בקשת חלופותISL84516IB דירוגים מרביים ומאפיינים חשמליים
| Device Type | Precision analog switch |
| Switch Configuration | Single-pole single-throw (SPST) |
| Number of Circuits | 1 circuit |
| Signal Configuration | 1:1 |
| On-Resistance | 20 ohm |
| Positive Supply Range | +1.5 V to +6 V |
| Negative Supply Range | -1.5 V to -6 V |
| Total Supply Span | 3 V to 12 V |
| Power Consumption | 350 mW |
| מארז | 8-SOIC |
| סוג הרכבה | Surface mount |
מדריך תצורת פינים של ISL84516IB 8-soic
תצורת פינים עבור ISL84516IB (מארזת 8-soic). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור ISL84516IB.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
ISL84516IB מתאים עבור 6 יישוםs: Battery-Powered Portable Instruments, Low-Voltage Data-Acquisition Systems, Precision Test and Measurement, Dual-Supply Signal Routing, Small-Signal Isolation Networks, Portable Sensor Interfaces.
Battery-Powered Portable Instruments
The ISL84516IB fits low-voltage portable instruments that route precision analog signals between a sensor path, processing circuitry and an output stage. Its dual-supply operation from ±1.5 V to ±6 V accommodates bipolar signal nodes around a low-voltage system reference, while the family is designed around low power consumption of 350 mW and low leakage. The 1:1 SPST configuration keeps the signal path straightforward when the system must preserve a selected measurement channel. Designers should calculate dissipation in the actual switch state, maintain every terminal inside the permitted rails and use short PCB routes to limit added capacitance. The ISL84516IB is particularly appropriate when the portable instrument requires a defined routing function rather than a general-purpose multiplexer.
מומלץ
Low-Voltage Data-Acquisition Systems
In a compact data-acquisition system, the ISL84516IB can route a selected low-level analog signal into a measurement or conversion channel. Its 20 ohm on-resistance is small compared with many high-impedance sensing paths, allowing the switch to contribute limited series resistance while providing a defined 1:1 connection. The ±1.5 V to ±6 V operating range supports bipolar front ends operating from low-voltage supplies. Designers should calculate the total acquisition error from the switch resistance, connector parasitics and the input impedance of the downstream converter. Keeping the switch close to the selected input node and separating its control trace from sensitive analog routing helps preserve signal integrity.
מומלץ
Precision Test and Measurement
The ISL84516IB is suitable for precision test and measurement equipment that connects a calibrated source, reference or measurement node through a controlled 1:1 path. Its family is characterized as a precision analog switch with excellent on-resistance flatness, which helps maintain predictable behavior as the selected signal range changes. The 20 ohm on-resistance must still be included in the complete signal-path calculation, especially when the system uses high source impedances. The 8-SOIC package supports compact instrument layouts, while ±1.5 V to ±6 V operation fits low-voltage analog backplanes. Place the device near the routed test node and provide a direct, low-impedance return path to minimize measurement errors.
מומלץ
Dual-Supply Signal Routing
The ISL84516IB is designed for systems that route signals around a zero-volt reference using positive and negative rails. Its operating limits of ±1.5 V to ±6 V give designers a clear range for bipolar signal nodes and control states. The SPST 1:1 arrangement provides a straightforward path for connecting or isolating one analog node. Because both rails are integral to operation, the system must maintain adequate headroom during startup and signal transitions. Decoupling near the supply pins, short analog connections and careful assignment of the control signal are essential for predictable behavior. This configuration is well suited to dual-supply sensor interfaces, signal-chain modules and compact precision analog boards.
מומלץ
Small-Signal Isolation Networks
The ISL84516IB can be used as the isolation element in a small-signal analog network where a source must be connected to or disconnected from a downstream node. Its 20 ohm on-resistance contributes a defined series impedance when the switch is closed, while the SPST topology avoids unnecessary parallel signal paths. The family's low-leakage characteristic is useful where source impedances are high and off-state current could disturb the measured node. Designers should verify leakage at the actual operating temperature and compare the complete switch impedance with the source and destination impedances. Short traces, stable supply bypassing and a defined control-signal state during reset are important for consistent isolation performance.
מומלץ
Portable Sensor Interfaces
The ISL84516IB fits portable sensor interfaces that need to select a low-level analog signal without adding a high-power multiplexing stage. Operation from ±1.5 V to ±6 V supports compact bipolar sensor front ends, while the stated 350 mW power consumption and low-leakage emphasis align with power-constrained equipment. The 20 ohm on-resistance is generally modest for many sensor paths, but it must be checked against the sensor's output impedance and the acquisition input. Place the switch close to the protected or isolated node, keep supply return paths compact and confirm that the control logic cannot exceed the device's permitted input range during reset.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור ISL84516IB — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה |
|---|---|
| Brand | Renesas Electronics |
| Package | 8-SOIC |
| Device Type | Precision analog switch |
| Switch Configuration | Single-pole single-throw (SPST) |
| Signal Configuration | 1:1 |
| On-Resistance | 20 ohm |
| Positive Supply Range | +1.5 V to +6 V |
| Negative Supply Range | -1.5 V to -6 V |
| Total Supply Span | 3 V to 12 V |
| Power Consumption | 350 mW |
מבדילים עיקריים
- Defined 1:1 precision signal-routing configuration (לעומתISL84517)
- Low-voltage bipolar operating range (לעומתGeneral-purpose single-supply analog switches)
- Low-resistance precision switching (לעומתHigher-resistance CMOS analog switches)
הערות תכנון
Treat the 20 ohm on-resistance as part of the complete signal-path impedance rather than as an isolated specification. Check it against the source output impedance, destination input impedance and required measurement accuracy. For high-impedance nodes, also evaluate off-state leakage, since it can create an error current that is significant relative to the measured signal. Place the switch close to the sensitive node and minimize trace length to reduce added capacitance.
The device operates from bipolar rails spanning ±1.5 V to ±6 V. Confirm that startup, reset and normal signal transitions cannot drive any connected pin outside its specified voltage range. Provide local supply bypassing and a low-impedance return path, then evaluate the system's total supply dissipation rather than using the 350 mW figure as a universal operating-point result. Control levels should remain compatible with the selected supply conditions.
Route the analog signal pins directly between the switch and their intended source and destination nodes. Keep the control trace away from sensitive analog inputs where practical, and use a solid ground or return plane to limit coupling. Avoid long branches beneath or beside the 8-SOIC device. Because the package has eight leads, verify the footprint and pin numbering against the manufacturer pin table before PCB release.
Do not assume that every switch in the ISL84516 and ISL84517 family has the same signal topology. The ISL84516IB is identified as a 1:1 SPST device, while a family member may provide a different routing arrangement. Also avoid using a single-supply circuit diagram as a direct substitute for the dual-rail application circuit. Validate logic states, supply sequencing and signal-node limits before fabrication or board bring-up.
מידע על תאימות
Compliance status is unknown because the accessible product excerpts do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free or conflict-minerals status. Verify these attributes from the current manufacturer product documentation before procurement.