onsemi

LM2901DR2G - Quad Open-Collector Comparator | onsemi

MPN: LM2901DR2G ✓ نشط
3 V to 36 V Vdss 14-pin SOIC Package
الحد الأدنى للطلب: 1 |

LM2901DR2G نظرة عامة

onsemi LM2901DR2G is a quad differential comparator for consumer, automotive, and industrial electronics, operating from 3 V to 36 V over a temperature range of -40°C to +105°C. The device provides four independent comparison channels in a 14-pin SOIC package, with open-collector outputs suitable for CMOS, TTL, and wired-interface signaling. Its single-supply architecture simplifies threshold detection and low-level sensing designs that require a practical supply range for both industrial and automotive equipment.

A comparator is an analog integrated circuit that evaluates two input voltages and produces a logic-level output indicating which input is higher. Within the broader semiconductor hierarchy, the LM2901 belongs to the comparator family, which sits alongside amplifiers, voltage references, and other analog signal-conditioning ICs. The LM2901 is particularly useful when a system must translate an analog threshold crossing into a digital event for control logic, memory, monitoring, or protection circuitry.

The principal features of the LM2901DR2G include four differential comparator channels, a 3 V to 36 V single-supply operating range, an open-collector output architecture, and compatibility with CMOS and TTL loads. Open-collector outputs permit the output stage to be pulled up to the voltage required by the receiving logic. Designers can therefore select the pull-up voltage independently of the comparator supply, provided it remains within the device's applicable operating limits.

The quad arrangement consolidates four comparison functions into one 14-SOIC package. This can reduce component count and board area in designs requiring multiple threshold decisions, such as battery monitoring, window comparison, signal crossing detection, and industrial control inputs. The open-collector architecture is also useful when several outputs must share a common bus or when an external pull-up defines the logic-high level. External pull-up resistors and output-rise-time analysis remain essential design considerations.

Typical uses include automotive battery and power-system monitoring, industrial sensor interfaces, consumer threshold detection, memory-control logic, and general industrial control systems. The -40°C to +105°C operating range supports applications across wide environmental conditions, while the 36 V upper supply limit accommodates higher-voltage industrial and automotive rails. Designers should verify input common-mode limits, output pull-up requirements, and input-current behavior against the manufacturer datasheet for the exact operating conditions.

When laying out an LM2901DR2G circuit, place pull-up resistors close to the open-collector outputs and keep sensitive threshold networks away from switching nodes and high-current return paths. Because the device is intended for level detection and low-level sensing, input filtering, hysteresis, and stable reference generation often matter more than high-speed signal fidelity. The component should be selected only after checking the complete datasheet limits for supply voltage, input common-mode range, output current, and electrical characteristics.

This page combines the exact LM2901DR2G configuration with same-package alternatives, application-specific engineering guidance, a parameter comparison table, and practical layout considerations. These details help buyers distinguish the 14-SOIC part from other LM2901 order codes and assess whether it is appropriate for a new industrial, automotive, or consumer circuit without changing the PCB footprint.

بدائل مباشرة لـ LM2901DR2G — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع LM2901DR2G (نفس عامل الشكل والبصمة) — يختلف في Comparator Type, Package, Input Bias Current, Output Type, Input Offset Voltage.

Texas Instruments
Package: 14-pin SOIC, 3.90 mm width
Input Bias Current: 3.5 nA
Input Offset Voltage: 0.37 mV
قارن مع LM2901DR2G →
onsemi
Comparator Type: Quad differential voltage comparator
Input Bias Current: 25 nA typical
قارن مع LM2901DR2G →
onsemi
Comparator Type: General-purpose differential comparator
Package: 14-SOIC, 0.154 inch / 3.90 mm width
Input Bias Current: 25 nA
قارن مع LM2901DR2G →

LM2901DR2

✅ بديل مباشر
onsemi
📦 14-SOIC
Quad differential voltage comparator · 4 channels · 3 V to 36 V · 25 nA typical · Open collector · Single supply or split supply

تواصل لمعرفة السعر

عرض ورقة البيانات ←

LM2901DRG4

✅ بديل مباشر
📦 14-SOIC
Same LM2901 family and 14-SOIC footprint; the order-code suffix differs by 0% in voltage class and comparator topology, while qualification details must be checked.

📋 بديل مرجعي (غير موجود في الكتالوج)

LM2901DG4

✅ بديل مباشر
Texas Instruments
📦 14-SOIC
Quad differential comparator · 4 channels · 30 V · 2 V to 36 V · 38 V · 0.37 mV · 3.5 nA · 200 µA per comparator

تواصل لمعرفة السعر

عرض ورقة البيانات ←

LM2901DR2

✅ بديل مباشر
onsemi
📦 14-SOIC
Quad differential voltage comparator · 4 channels · 3 V to 36 V · 25 nA typical · Open collector · Single supply or split supply

تواصل لمعرفة السعر

عرض ورقة البيانات ←

LM2901QDRG4Q1

✅ بديل مباشر
📦 14-SOIC
Automotive-qualified 14-SOIC LM2901 family option; core topology matches while qualification and exact electrical limits require comparison.

📋 بديل مرجعي (غير موجود في الكتالوج)

LM2901DR2G الحدود القصوى والخصائص الكهربائية

Comparator Type Quad differential comparator
Number of Channels 4 channels
Supply Voltage Range 3 V to 36 V
نطاق درجة حرارة التشغيل -40°C to +105°C
نوع الخرج Open collector
Logic Compatibility CMOS and TTL
العلبة 14-pin SOIC
نوع التركيب Surface mount
Automotive-Grade Variant NCV2901 family variant identified by onsemi

دليل تكوين أطراف LM2901DR2G 14-pin soic

تكوين الأطراف لـ LM2901DR2G (حزمة 14-pin soic). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.

مخطط توزيع أطراف حزمة 14-pin soic لـ LM2901DR2G

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ LM2901DR2G.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

LM2901DR2G مناسب لـ 6 التطبيقs: Automotive Battery Threshold Monitoring, Industrial Sensor Limit Detection, Power-Supply Fault Signaling, Consumer Level and Range Detection, Memory and Control Logic, Window Comparator and Signal Crossing Detection.

🚗

Automotive Battery Threshold Monitoring

The LM2901DR2G is well suited to automotive threshold-detection stages because four comparison channels operate from 3 V to 36 V within a -40°C to +105°C temperature range. Each channel can compare a divided battery signal with a reference and use its open-collector output to request an alert, inhibit a charger, or change an operating mode. Dividing the battery voltage protects the input range and allows multiple thresholds to be checked with only one IC. The open-collector output can also be pulled up to the vehicle logic supply, although the pull-up voltage must satisfy the device limits. For a production design, add transient protection at the battery input, verify the input common-mode range under cranking and load-dump conditions, and confirm automotive qualification against the selected order code.

🏭

Industrial Sensor Limit Detection

The LM2901DR2G can convert analog sensor conditions into logic events for industrial controllers. Its four independent channels reduce component count when monitoring temperature, pressure, level, or current thresholds, while the 3 V to 36 V supply range supports control systems operating above the lowest logic voltages. Each open-collector output can drive an isolated relay driver, PLC input, or fault line with a suitable pull-up resistor. The device's -40°C to +105°C range covers many industrial environments, but enclosure temperature and sensor accuracy still determine overall fault-detection performance. Engineers should add hysteresis to avoid chatter near a threshold, protect sensor inputs from transients, and verify input bias current, common-mode range, and output sink current before finalizing the interface network.

⚡

Power-Supply Fault Signaling

The LM2901DR2G is useful for monitoring multiple power rails or input thresholds in power-management equipment. Four comparators can evaluate divided feedback signals against stable references and produce open-collector fault outputs when a rail leaves its permitted range. The 3 V to 36 V operating capability suits systems with a wider input range than ordinary low-voltage logic ICs, while the four-channel package can consolidate overvoltage, undervoltage, sequencing, and enable checks. The design trade-off is that a linear regulator dissipates the difference between input and output voltage, so comparator current should remain modest where continuous monitoring is required. Pull-up resistors should be scaled to balance fault signaling speed with supply-current consumption, and every monitored input must remain inside the comparator's specified common-mode range.

📱

Consumer Level and Range Detection

The LM2901DR2G supports compact consumer products that must identify when an analog signal enters or leaves a permitted range. Its four channels can monitor battery level, audio or sensor thresholds, charging conditions, or a divided system signal without requiring four separate packages. The open-collector outputs provide simple wired logic for a microcontroller or system controller, and their CMOS and TTL compatibility supports common digital input arrangements. In battery-powered equipment, however, continuous divider and pull-up currents can dominate standby consumption, so resistor values should be optimized without allowing excessive output rise time. Add positive feedback for hysteresis where the sensed signal has noise or slow transitions, and confirm that the chosen order code satisfies the product's environmental and component-qualification requirements.

🖥️

Memory and Control Logic

The LM2901DR2G can implement simple memory-control and qualification functions where several analog or digital conditions must be resolved before a system changes state. Four open-collector channels may monitor voltage thresholds, acknowledge lines, or timing-derived control signals while operating from the same broad 3 V to 36 V supply range. Open-collector outputs are useful when a wired logic function is needed, but designers must account for the pull-up resistor's rise time and ensure that only one output actively sinks current when a wired-AND node is used. For reliable logic behavior, use clean pull-up connections, maintain adequate logic-level voltage margins, and verify propagation delay and input offset requirements against the timing budget. The onsemi datasheet should be used for the final pin assignments and electrical limits.

📺

Window Comparator and Signal Crossing Detection

The LM2901DR2G can implement upper and lower window checks by pairing two comparison channels around a common reference. This arrangement is useful for battery, signal-strength, temperature, or supply-rail monitoring where the system must distinguish an in-range condition from both under-range and over-range faults. Its four channels allow two window functions in one package, reducing board area while maintaining open-collector fault outputs. The principal design challenge is reference accuracy: errors in the reference or resistor divider can shift the actual trip points. Use stable reference and feedback components, add hysteresis to prevent repeated output transitions, and keep the sensing node within the input common-mode limits across the full 3 V to 36 V operating range and -40°C to +105°C temperature span.

What is the LM2901DR2G?
The LM2901DR2G is an onsemi quad differential comparator with four open-collector outputs in a 14-pin SOIC package. According to the onsemi LM2901 datasheet, it operates from 3 V to 36 V and is intended for level detection, low-level sensing, memory applications, and consumer, automotive, and industrial electronics. Its open-collector outputs can interface with CMOS or TTL logic when suitable pull-up resistors are used.
What is the supply voltage range of the LM2901DR2G?
The LM2901DR2G operates from 3 V to 36 V. According to the onsemi LM2901 datasheet and the manufacturer product listing, this single-supply range allows the comparator to be used in low-voltage logic systems as well as higher-voltage industrial and automotive applications. Input common-mode and output pull-up limits must remain within the limits specified for the exact operating condition.
Where can I download the LM2901DR2G datasheet PDF?
The LM2901DR2G datasheet PDF is available through the onsemi document listing linked on this page, while the manufacturer product page provides the device overview and ordering information. The onsemi document identifies the part as a single-supply quad comparator and provides the electrical, pin, and application information needed to assess a 14-SOIC design.
Where can I find the LM2901DR2G pinout?
Use the pin-description table and package drawing in the onsemi LM2901 datasheet to confirm every LM2901DR2G connection before layout release. The device uses a 14-pin SOIC with four comparator channels, open-collector outputs, supply, and ground. Because signal names and unused-pin handling must match the manufacturer documentation exactly, assign the PCB nets directly from that table.
What are the key specifications of LM2901DR2G that engineers should know?
The LM2901DR2G combines four differential comparator channels with a 3 V to 36 V supply range, open-collector outputs, and a -40°C to +105°C operating range. According to the onsemi product listing and datasheet, the 14-SOIC device supports CMOS and TTL interfacing. The principal design considerations are the open-collector pull-up requirement, input common-mode range, output sink current, offset voltage, and propagation delay.
Is the LM2901DR2G suitable for automotive battery monitoring?
The LM2901DR2G is suitable for certain automotive battery-monitoring and threshold-detection circuits because it operates from 3 V to 36 V over -40°C to +105°C. According to the onsemi product description, the LM2901 family is intended for consumer, automotive, and industrial level detection and low-level sensing. The circuit must also satisfy the device's input common-mode, output-current, and transient-protection requirements.
How is an open-collector LM2901DR2G output connected?
Each LM2901DR2G open-collector output requires an external pull-up resistor to a suitable logic-supply voltage. The comparator sinks current when its output state is low, while the resistor establishes the high state. According to the onsemi LM2901 family information, the device can operate with CMOS and TTL logic. Choose the resistor to balance rise time, power, and output sink-current requirements.
Can LM2901DR2G outputs share a common pull-up bus?
Yes, open-collector outputs can share a common pull-up when the system requires wired-AND behavior or a shared interrupt line. The pull-up voltage must be compatible with every attached output and the receiving logic, and the combined sink current must remain within the LM2901DR2G output limits. The onsemi datasheet remains the controlling reference for output current and electrical limits.
LM2901DR2G vs LM2901DRG4Q1 - which is better for automotive designs?
The LM2901QDRG4Q1 is the better candidate when AEC-Q100-qualified automotive qualification is required, while the standard LM2901DR2G should be selected for non-automotive designs that do not require that qualification. Both are associated with the 14-SOIC LM2901 family, but the Q1 order code identifies an automotive-qualified option. Confirm exact pin, temperature, and electrical details in each manufacturer document.
When should I choose LM2901DR2G over LM2901DR?
Choose the LM2901DR2G when the BOM specifies the onsemi-qualified manufacturing source and its 14-SOIC configuration meets the product requirements. Choose the Texas Instruments LM2901DR when its manufacturer-specific qualification, sourcing, or production documentation is preferred for the same general quad-comparator function. Both families target 14-SOIC designs, but engineers should compare the exact ordering documents before substitution.
What is the best drop-in replacement for LM2901DR2G?
The closest drop-in choices identified for the LM2901DR2G are onsemi LM2901DR2 and the 14-SOIC LM2901 variants from Texas Instruments, subject to exact document review. A genuine drop-in replacement must preserve the 14-SOIC footprint, pin functions, supply range, output architecture, and operating-temperature requirements. The LM2901DG4 and LM2901QDRG4Q1 variants may also fit mechanically, but their exact order-code characteristics must be confirmed before approval.
What can replace an LM2901DR2G in a 14-SOIC design?
An LM2901-family 14-SOIC comparator can potentially replace the LM2901DR2G, including onsemi LM2901DR2 and relevant Texas Instruments LM2901 order codes. The replacement must preserve pin-to-pin connections and meet the original circuit's voltage, temperature, common-mode, output-current, and timing requirements. Review the exact manufacturer datasheet rather than relying only on the family name.
Where can I buy LM2901DR2G online and what is the lead time?
Use the Request a Quote form on this page to request LM2901DR2G availability, current lead time, and order handling without relying on a static quotation. The part is a standard onsemi catalog item in a 14-SOIC package, but current stock and production timing can change by order quantity. Include your required quantity, target date, and approved-manufacturer requirement with the request.
What is the price of LM2901DR2G?
Current LM2901DR2G pricing is handled through the Request a Quote form on this page because quotation levels, source, quantity, and delivery terms can affect the final amount. The structured pricing area is updated separately from the technical product description. Submit the required quantity, package quantity, and shipment location for an actionable quotation.
Is LM2901DR2G in stock?
Current LM2901DR2G stock status should be confirmed through the Request a Quote form on this page. The manufacturer catalog listing and distributor results show that the part is actively offered, but inventory changes with demand, lot availability, and customer allocation. Provide the required quantity and delivery schedule when requesting a stock confirmation and lead-time quotation.

بيانات مرجعية هندسية لـ LM2901DR2G — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the LM2901DR2G when a design requires four open-collector differential comparison channels in a 14-SOIC package, a 3 V to 36 V supply range, and operation from -40°C to +105°C. It is particularly appropriate for battery monitoring, industrial sensor thresholds, power-rail supervision, and general low-level sensing. Choose onsemi LM2901DR2, LM2901DRG4, or LM2901DG4 when the approved source or exact order code better matches the product's procurement and qualification requirements. Consider the Texas Instruments LM2901DR when that manufacturer's documentation and sourcing are preferred, but compare voltage, timing, offset, common-mode, and output-current limits before substitution. Select LM2901QDRG4Q1 when an automotive-qualified Q1 order code is required. In every case, verify the 14-SOIC pin assignments, external pull-up network, input hysteresis, and environmental limits against the exact replacement datasheet.

المقارنة مع البدائل

المعامل هذا المنتج LM2901DR2 LM2901DRG4 LM2901DG4 LM2901DR LM2901QDRG4Q1
Brand onsemi onsemi onsemi onsemi Texas Instruments Texas Instruments
Package 14-SOIC 14-SOIC 14-SOIC 14-SOIC 14-SOIC 14-SOIC
Product Type Quad differential comparator Quad differential comparator LM2901 family comparator LM2901 family comparator Quad differential comparator LM2901 family comparator
Number of Channels 4 channels 4 channels 4 channels 4 channels 4 channels 4 channels
Output Type Open collector Open collector Open collector Open collector Open collector Open collector
Primary Application Level detection and low-level sensing Level detection and low-level sensing General-purpose comparison General-purpose comparison General-purpose comparison Automotive comparison

أبرز الفروقات

  • Four independent threshold-detection channels in one package (مقابلLM2901DR)
  • Wide single-supply operating range (مقابلLM2901DRG4)
  • Open-collector outputs support flexible logic interfacing (مقابلLM2901QDRG4Q1)
  • Wide environmental operating range (مقابلLM2901DG4)

ملاحظات التصميم

Place each open-collector pull-up resistor close to the associated LM2901DR2G output so that the physical loop between the device and receiver is minimized. This reduces susceptibility to capacitive coupling and keeps the logic transition path short. Route threshold-sensing traces away from inductors, switching nodes, and high-current return paths. When a fault output crosses a substantial distance, use a driver or differential interface rather than relying on a weak pull-up signal.

Do not treat an open-collector output as a push-pull logic output. A pull-up resistor is required to establish the high state, and its value determines both the logic rise time and the maximum sink current. Adding hysteresis with positive feedback is recommended when the compared signal contains noise or changes slowly near the threshold. The reference network and input divider should also avoid levels outside the device's specified common-mode range.

Estimated: a 10 kΩ pull-up connected to 5 V can source approximately 0.5 mA when the output is low, based on Ohm's law using 5 V and 10 kΩ inputs. This estimate illustrates the trade-off between low pull-up current and output rise time; the final value must also remain within the LM2901DR2G sink-current and receiver-input requirements. The manufacturer datasheet controls the allowable operating and electrical limits.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The onsemi family is described as available in an automotive-grade NCV2901 variant, but the compliance status of the exact LM2901DR2G order code requires confirmation from its current manufacturer product documentation.

تم التحقق من البيانات في: 2026-11-20 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

lm2901dr2g datasheet LM2901DR2G pinout LM2901DR2G datasheet pdf LM2901DR2G equivalent LM2901DR2G replacement LM2901DR2G 14-SOIC LM2901DR2G open collector LM2901DR2G 3-36V LM2901DR2G vs LM2901DR onsemi LM2901DR2G LM2901DR2G price LM2901DR2G stock

المكونات والمصطلحات ذات الصلة

onsemi LM2901DR2G LM2901DR2 LM2901DRG4 LM2901DG4 LM2901DR LM2901QDRG4Q1 quad differential comparator comparator IC analog integrated circuit semiconductor open-collector output CMOS logic TTL logic single-supply operation level detection low-level sensing 14-SOIC package SOIC family surface-mount package input common-mode range input offset voltage propagation delay output sink current power-supply supervision
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر