LM5117QMHX/NOPBQ1 - 65V Sync Buck Controller AEC-Q100 | TI
MPN: LM5117QMHX/NOPB ✓ نشط| الكمية | سعر الوحدة | الإجمالي |
|---|---|---|
| 1 | $6.2 | $6.20 |
| 10 | $5.58 | $55.80 |
| 100 | $4.8 | $480.00 |
| 500 | $4.15 | $2,075.00 |
| 1,000 | $3.72 | $3,720.00 |
LM5117QMHX/NOPB نظرة عامة
A synchronous buck controller is a pulse-width-modulated power management IC that drives external MOSFETs to convert a higher input voltage to a lower output voltage with high efficiency. Unlike a buck converter with integrated switches, a controller allows designers to scale output current and voltage with their choice of external MOSFETs and inductors, making it the preferred choice in the power-conversion hierarchy for high-power, high-reliability systems.
Key features include emulated peak current-mode control, which provides inherent line feed-forward, cycle-by-cycle current limiting, and simplified loop compensation. The controller supports free-run operation or external synchronization up to 750 kHz, with adaptive dead-time control to minimize body-diode conduction losses. An optional diode emulation mode improves light-load efficiency, and an analog current monitor (CM pin) provides a voltage proportional to load current for system telemetry.
The LM5117-Q1 architecture uses an emulated control ramp that eliminates the need for slope compensation over most operating ranges, and it tolerates very small duty cycles - useful when converting 48V automotive or 24V industrial buses down to low voltages. Robust 3.3A gate drivers allow large FETs for currents well beyond 10A depending on external components.
Typical applications include automotive infotainment and ADAS power rails (48V/24V-to-5V/3.3V), 24V industrial automation supplies, telecom intermediate bus converters, and USB-C PD adapters. The AEC-Q100 qualification makes it particularly suited to engine-bay-adjacent modules.
Design consideration: layout is critical - keep the HO/LO gate loops short and place the current-sense traces as a Kelvin pair across the sense element to realize the accuracy of the analog current monitor.
بدائل مباشرة لـ LM5117QMHX/NOPB — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع LM5117QMHX/NOPB (نفس عامل الشكل والبصمة) — يختلف في Package, RoHS Status, Switching Frequency, Topology.
أداة المقارنة السريعة — اختر قطعًا بديلة للمقارنة جنبًا إلى جنب:
LM5117PMH/NOPB
تواصل لمعرفة السعر
عرض ورقة البيانات ←LM5117MHX/NOPB
تواصل لمعرفة السعر
عرض ورقة البيانات ←LM5117QPMHX/NOPB
📋 بديل مرجعي (غير موجود في الكتالوج)
LM5117QPMH/NOPB
📋 بديل مرجعي (غير موجود في الكتالوج)
LM25116QMHX/NOPB
📋 بديل مرجعي (غير موجود في الكتالوج)
LM5117QMHX/NOPB الحدود القصوى والخصائص الكهربائية
| البنية الطوبولوجية | Synchronous Buck Controller |
| نطاق جهد الدخل | 5.5 V to 65 V |
| Control Method | Emulated Peak Current Mode |
| Peak Gate Drive Current | 3.3 A |
| تردد التبديل | Up to 750 kHz (free-run or synchronizable) |
| AEC-Q100 Qualification | Grade 1, -40C to +125C ambient |
| Analog Current Monitor | Yes (CM output) |
| Diode Emulation | Optional (light-load efficiency) |
| Dead-Time Control | Adaptive |
| Clock Synchronization | Yes, up to 750 kHz |
| العلبة | 20-HTSSOP (MH) with exposed pad |
| نوع التركيب | Surface Mount |
| Automotive Qualification | AEC-Q100 Qualified |
| نطاق درجة حرارة التشغيل | -40C to +125C |
| حالة RoHS | Compliant (NOPB - no Pb ball/plating) |
| نوع الخرج | External MOSFET driven (controller) |
تكوين أطراف LM5117QMHX/NOPB
| دبوس 1 | SLOPE — Slope compensation setting pin |
| دبوس 2 | COMP — Error amplifier output for loop compensation |
| دبوس 3 | FB — Feedback voltage input (0.6V reference) |
| دبوس 4 | CM — Analog current monitor output |
| دبوس 5 | AGND — Analog ground |
| دبوس 6 | SS — Soft-start programming pin |
| دبوس 7 | RT — Frequency-setting resistor |
| دبوس 8 | SYNC — Clock synchronization input/output |
| دبوس 9 | HO — High-side gate drive output |
| دبوس 10 | HS — High-side source / switch node sense |
| دبوس 11 | HB — High-side driver bootstrap supply |
| دبوس 12 | LO — Low-side gate drive output |
| دبوس 13 | PGND — Power ground |
| دبوس 14 | CS — Current sense input |
| دبوس 15 | DE — Diode emulation enable |
| دبوس 16 | RES — Restart / hiccup control pin |
| دبوس 17 | UVLO — UVLO threshold adjustment input |
| دبوس 18 | VCC — Internal LDO output / driver supply |
| دبوس 19 | VIN — Input supply voltage (5.5V to 65V) |
| دبوس 20 | EN — Enable input |
التطبيقات النموذجية
LM5117QMHX/NOPB مناسب لـ 6 التطبيقs: Automotive 48V / 24V Bus Step-Down, Industrial Automation 24V Power Supplies, Telecom Intermediate Bus Conversion, USB-C PD and Adapter Power, ADAS and Infotainment Power, High-Voltage Battery Test and Monitoring Systems.
Automotive 48V / 24V Bus Step-Down
The LM5117QMHX/NOPBQ1 converts 24V or 48V automotive rails (with surge tolerance up to 65V) to 5V or 3.3V system rails. Its emulated peak current-mode control provides inherent line feed-forward, so output regulation stays tight across wide battery-voltage swings, and cycle-by-cycle current limiting protects against shorts. AEC-Q100 Grade 1 qualification (-40C to +125C ambient) is mandatory for under-hood-adjacent ECUs. With 3.3A gate drives driving large external FETs, designs routinely exceed 10A output. Placed as the first stage after reverse-protection and transient clamping, it feeds downstream point-of-load converters with a clean intermediate rail; diode emulation cuts standby drain when the module sleeps.
موصى به
Industrial Automation 24V Power Supplies
Industrial PLC and factory-automation systems universally run 24V rails with wide tolerance; the LM5117QMHX/NOPBQ1 steps these down efficiently with a 65V absolute ceiling covering brownout and transient conditions. Current-mode control simplifies loop compensation, shortening design cycles for multi-output systems, and the analog current monitor (CM pin) feeds a system MCU for predictive maintenance and load telemetry without an extra current-sense amplifier. Free-run operation up to 750 kHz lets designers trade inductor size against efficiency; ~300 kHz is a common industrial choice. Adaptive dead-time and optional diode emulation keep efficiency high across the light-load-to-full-load range typical of I/O modules.
موصى به
Telecom Intermediate Bus Conversion
In -48V telecom power architectures and high-voltage distributed rails, the LM5117QMHX/NOPBQ1 serves as an intermediate-bus converter controller, stepping 48V-class inputs to 12V or 5V intermediate buses with high efficiency. Very small duty-cycle operation - a natural consequence of 65V-to-low-voltage conversion - is well handled by the emulated control ramp, which avoids the subharmonic instability of conventional current mode without heavy slope compensation. External MOSFET selection lets designers scale current from a few amps to tens of amps. Synchronization up to 750 kHz allows multiple converters to be frequency-aligned, simplifying EMI filter design for the system input.
موصى به
USB-C PD and Adapter Power
High-power USB-C PD adapters and chargers with universal AC inputs (rectified to 400V, then down to 20V-class) use a second stage where the LM5117QMHX/NOPBQ1 converts the intermediate 24-48V bus to 5V/9V/15V/20V programmable outputs. Its wide input range covers all PD voltage classes from one design, and cycle-by-cycle current limiting provides the fast overcurrent response PD contracts demand. The analog current monitor supports cable/load diagnostics and PD firmware current reporting. With 3.3A gate drives and adaptive dead-time, 90%+ stage efficiency is achievable at 300-400 kHz, keeping adapter thermal profiles within enclosed-plastic limits.
موصى به
ADAS and Infotainment Power
ADAS camera, radar, and infotainment modules require clean, sequenced low-voltage rails derived from automotive battery power. The LM5117QMHX/NOPBQ1 provides the front-end step-down from battery (with 65V surge headroom for load dump), and its precise current-mode loop delivers low output ripple that simplifies downstream filtering for noise-sensitive image and radar sensor supplies. Grade 1 temperature rating covers cabin-to-engine-bay mounting variety. Soft-start and enable control allow rail sequencing with the system power-management IC, while diode emulation minimizes key-off battery drain - a critical automotive quiescent-budget requirement for always-listening ADAS sensors.
موصى به
High-Voltage Battery Test and Monitoring Systems
Battery formation, test, and BMS auxiliary supplies operate from 48-60V stacks, squarely within the 65V input capability of the LM5117QMHX/NOPBQ1. The analog current monitor output gives a single-pin, amplifier-free measurement of converter current that test equipment MCUs can digitize, reducing BOM cost in multi-channel systems. Robust 3.3A gate drives drive large synchronous FETs for the high circulating currents typical of formation equipment, and cycle-by-cycle limiting safely survives repeated short-circuit events on fixture misconnection. Synchronizable switching up to 750 kHz allows several channels to interleave clocks, spreading EMI across the spectrum.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ LM5117QMHX/NOPB — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | LM5117QPMHX/NOPB | LM5117PMH/NOPB | LM5117MHX/NOPB | LM25116QMHX/NOPB |
|---|---|---|---|---|---|
| Package | HTSSOP-20 (MH) | HTSSOP-20 (PWP, PowerPAD) | HTSSOP-20 (PWP, PowerPAD) | HTSSOP-20 (MH) | HTSSOP-20 (MH) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Input Voltage Range | 5.5 V to 65 V | 5.5 V to 65 V | 5.5 V to 65 V | 5.5 V to 65 V | 5.5 V to 65 V |
| AEC-Q100 Qualification | Yes (Grade 1) | Yes (Grade 1) | No | No | Yes (Grade 1) |
| Analog Current Monitor | Yes (CM pin) | Yes (CM pin) | Yes (CM pin) | Yes (CM pin) | No |
أبرز الفروقات
- Automotive AEC-Q100 Grade 1 qualification (مقابلLM5117MHX/NOPB)
- Integrated analog current monitor (CM pin) (مقابلLM25116QMHX/NOPB)
- 65V input with emulated current-mode control (مقابلGeneric 60V controllers)
ملاحظات التصميم
Route the CS current-sense pair as a Kelvin connection directly across the current-sense element; the emulated current-mode loop accuracy and the CM analog current monitor output both depend on clean sense signals. Keep HO/HB and LO gate-drive loops under 1 cm with the driver return (PGND/HS) adjacent. Place VIN and VCC decoupling (0.1uF + 4.7uF) within 3 mm of their pins. Reference TI datasheet layout section and LM5117 EVM user guide for the recommended 4-layer stackup.
At 48V input converting to 5V, duty cycle is very small (~10%); the LM5117's emulated ramp is designed for this, but verify the minimum on-time at 750 kHz operation - if constrained, reduce frequency to 200-400 kHz. Size the bootstrap capacitor (0.1uF + diode) for the chosen FET gate charge, and confirm VCC LDO thermal margin when driving large MOSFETs at high frequency.
Do not exceed 65V on VIN - automotive load dump requires external TVS clamping upstream. The UVLO pin divider must be set so the part does not chatter during cranking transients. When using diode emulation (DE pin), be aware that synchronous rectification is disabled at light load, changing light-load output ripple behavior; validate both DE modes in your load profile before freezing the design.
معلومات الامتثال
NOPB suffix denotes No Pb (lead-free). AEC-Q100 Grade 1 qualification confirmed by TI LM5117-Q1 product page. REACH/halogen status not stated in provided data.
