Texas Instruments

MAX3232IDWRE4 - 250kbps Dual RS-232 Transceiver | Texas Instruments

MPN: MAX3232IDWRE4 ✓ نشط
3 V to 5.5 V Vdss 16-SOIC Package
الحد الأدنى للطلب: 1 |

MAX3232IDWRE4 نظرة عامة

Texas Instruments MAX3232IDWRE4 is a dual RS-232 line-driver and line-receiver transceiver with two drivers, two receivers, a 3 V to 5.5 V supply range, and a maximum data rate of 250 kbps. The device is packaged in a 16-pin SOIC and is specified for an industrial operating-temperature range of -40°C to 85°C.

An RS-232 interface transceiver is an interface IC that converts digital logic-level signals into RS-232 line levels and converts incoming RS-232 signals back into logic-level voltages. In the hierarchy of electronic components, this dual transceiver belongs to the RS-232 interface IC family, interface IC category, and broader semiconductor and signal-conditioning product classes. The MAX3232 combines both directions of conversion on one device, reducing the component count in equipment that requires more than one serial communication channel.

The MAX3232IDWRE4 operates from 3 V to 5.5 V, supports data rates up to 250 kbps, and integrates two drivers with two receivers. Its 16-SOIC package measures 0.295 inches, or 7.50 mm, in width. The industrial temperature grade supports applications operating from -40°C through 85°C, while its dual architecture suits systems needing two transmit and two receive channels.

The device uses charge-pump circuitry to generate the positive and negative voltages required by the RS-232 electrical interface. According to the MAX3232 documentation, the serial-port connection pins provide plus-or-minus 15 kV ESD protection. The circuit also meets the electrical-interface requirements of TIA/EIA-232-F. These features make it appropriate for legacy and industrial serial links where logic-level UART signaling must cross into an RS-232 connection.

Typical applications include industrial controller links, programmable-logic-controller serial communication, instrumentation, barcode-scanner interfaces, and legacy computer serial ports. A single MAX3232 can support two RS-232 channels, but each channel still requires the correct external charge-pump capacitors, signal routing, ground reference, and connector protection required by the system interface.

The primary design consideration is charge-pump capacitor selection and placement. Use the capacitor values specified by the manufacturer datasheet and place them close to the corresponding IC pins to minimize switching noise and unstable charge-pump behavior. Confirm that the host UART logic levels, baud rate, signal polarity, and RS-232 connector wiring match the target equipment.

This product page combines the verified MAX3232IDWRE4 electrical and mechanical characteristics with same-package drop-in alternatives, parameter-by-parameter comparison, application guidance, and practical PCB considerations. It is intended to help engineers identify whether the MAX3232IDWRE4 fits a new RS-232 design or whether a listed replacement offers a better sourcing or lifecycle option.

بدائل مباشرة لـ MAX3232IDWRE4 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع MAX3232IDWRE4 (نفس عامل الشكل والبصمة) — يختلف في Number of Drivers, Number of Receivers, Product Type, Supply Voltage Range.

MaxLinear
Number of Drivers: 2
Number of Receivers: 2
Product Type: RS-232 transceiver
قارن مع MAX3232IDWRE4 →

MAX3232IDWR

✅ بديل مباشر
Texas Instruments
📦 16-SOIC
RS-232 line driver/receiver transceiver · 2 · 2 · 3 V to 5.5 V · 250 kbit/s · 300 µA typical · ±15 kV · 4 x 0.1 µF

تواصل لمعرفة السعر

عرض ورقة البيانات ←

MAX3232EIDR

✅ بديل مباشر
Texas Instruments
📦 16-SOIC
Dual RS-232 line driver/receiver transceiver · 2 drivers · 2 receivers · 250 kbps · 3 V to 5.5 V · 3.3 V · RS-232 · ±15 kV

تواصل لمعرفة السعر

عرض ورقة البيانات ←

MAX3232ECDR

✅ بديل مباشر
Texas Instruments
📦 16-SOIC
Dual RS-232 line driver and receiver · 2 channels · 3 V to 5.5 V · 250 kbps · ±15 kV IEC ESD protection · RS-232 · 2 transmit and 2 receive functions · 16-pin SOIC

تواصل لمعرفة السعر

عرض ورقة البيانات ←

ADM3202ARWZ-REEL

✅ بديل مباشر
📦 16-SOIC
Similar dual RS-232 interface in a 16-SOIC format; verified compatibility listing indicates a 0-package-pin difference, while channel thresholds and capacitor details require design-level review.

📋 بديل مرجعي (غير موجود في الكتالوج)

SP3232EET-L

✅ بديل مباشر
MaxLinear
📦 16-SOIC
RS-232 transceiver · 2 transmit / 2 receive channels · +3.0 V to +5.5 V · 120 kbps · 1 mA · -40 C to +85 C · 16-SOIC · RS-232 / EIA/TIA-232-F

تواصل لمعرفة السعر

عرض ورقة البيانات ←

ICL3232IBNZ

✅ بديل مباشر
📦 16-SOIC
Similar RS-232 transceiver function in a 16-SOIC package; verified compatibility listing indicates a 0-package-pin difference, with threshold and capacitor details requiring comparison.

📋 بديل مرجعي (غير موجود في الكتالوج)

MAX3232IDWRE4 المواصفات

Product Type Dual RS-232 line driver/receiver transceiver
Number of Drivers 2 drivers
Number of Receivers 2 receivers
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbps
نطاق درجة حرارة التشغيل -40°C to +85°C
العلبة 16-SOIC
Package Width 7.50 mm (0.295 inch)
Terminal Count 16 terminals
نمط التركيب Gull-wing surface mount
Temperature Grade Industrial
ESD Protection ±15 kV on serial-port connection pins
RS-232 Standard TIA/EIA-232-F

تكوين أطراف MAX3232IDWRE4

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
دبوس 1 C1+ — Charge-pump flying capacitor positive terminal
دبوس 2 C1- — Charge-pump flying capacitor negative terminal
دبوس 3 C2+ — Charge-pump flying capacitor positive terminal
دبوس 4 C2- — Charge-pump flying capacitor negative terminal
دبوس 5 V+ — Charge-pump positive voltage output
دبوس 6 C2+ — Charge-pump capacitor connection
دبوس 7 R1OUT — Receiver 1 logic output
دبوس 8 R2OUT — Receiver 2 logic output
دبوس 9 R2IN — Receiver 2 RS-232 input
دبوس 10 R1IN — Receiver 1 RS-232 input
دبوس 11 T2IN — Driver 2 logic input
دبوس 12 T1IN — Driver 1 logic input
دبوس 13 GND — Ground connection
دبوس 14 VCC — Positive supply voltage
دبوس 15 T1OUT — Driver 1 RS-232 output
دبوس 16 T2OUT — Driver 2 RS-232 output

التطبيقات النموذجية

MAX3232IDWRE4 مناسب لـ 6 التطبيقs: Industrial Controller Serial Communication, Test and Measurement Instruments, Barcode Scanner and Data Collection, Legacy Computer Serial Port Interface, Network Equipment Console Access, Embedded UART-to-RS-232 Conversion.

🏭

Industrial Controller Serial Communication

The MAX3232IDWRE4 fits dual-channel serial communication in industrial controllers, HMIs, and programmable-logic-controller systems. Its two drivers and two receivers can support two RS-232 ports, while the 3 V to 5.5 V supply range accommodates both 3.3 V and 5 V control electronics. The specified -40°C to +85°C range covers factory environments with substantial temperature variation. Designers should follow the datasheet charge-pump capacitor values, place them close to the IC, and verify the logic levels and connector pinout of each connected controller.

🔧

Test and Measurement Instruments

The MAX3232IDWRE4 is useful in test and measurement instruments that must communicate with RS-232 service ports, computers, or legacy analyzers. Its 250 kbps maximum data rate covers common UART baud rates, and the dual-channel arrangement reduces the number of interface components needed. The ±15 kV ESD protection on the serial-port connection pins adds useful protection for externally accessible equipment. The enclosure and cable path still require suitable transient protection, a defined signal ground, and connector-level surge mitigation.

📟

Barcode Scanner and Data Collection

A MAX3232IDWRE4 can bridge a scanner, reader, or data-collection terminal to an RS-232 host. The 3 V to 5.5 V operating range allows the interface to share common embedded-system rails, while 250 kbps is suitable for conventional serial scanners. Two drivers and two receivers make the device practical when one port carries host commands and another carries auxiliary equipment. Keep RS-232 cable routing away from high-current switching paths and validate that the scanner uses the same logic polarity and connector wiring.

🖥️

Legacy Computer Serial Port Interface

The MAX3232IDWRE4 provides a compact interface for modern embedded controllers that must connect to a legacy RS-232 computer port. The dual-driver, dual-receiver arrangement supports two logical serial channels in one 16-SOIC package, and the 3 V to 5.5 V supply range simplifies adaptation to embedded logic rails. The maximum 250 kbps rate covers many legacy UART modes. Because RS-232 is point-to-point, verify whether the target port is configured as DTE or DCE and wire straight-through or crossover connections accordingly.

🌐

Network Equipment Console Access

The MAX3232IDWRE4 can support service-console and equipment-maintenance links in network appliances where RS-232 remains available for installation or diagnostics. Two channels allow one console port and one auxiliary interface, while the 250 kbps rate is appropriate for terminal sessions and configuration traffic. Industrial temperature qualification supports equipment installed in controlled network cabinets and telecommunications rooms. Design the interface with proper chassis grounding, cable shielding, and electrostatic-discharge protection at the exposed connector.

🧩

Embedded UART-to-RS-232 Conversion

The MAX3232IDWRE4 is appropriate when a microcontroller, DSP, or application processor requires RS-232 instead of TTL or CMOS UART levels. Its two transmitters and two receivers permit multiple serial links, and the 3 V to 5.5 V operating range supports common embedded supply voltages. At rates up to 250 kbps, the interface suits configuration ports, data acquisition links, and peripheral communication. Confirm the host UART voltage, baud rate, parity format, and signal direction before connecting the RS-232 connector.

What is the MAX3232IDWRE4?
The MAX3232IDWRE4 is a dual RS-232 transceiver from Texas Instruments containing two line drivers and two line receivers. According to the manufacturer datasheet, it operates from 3 V to 5.5 V, supports data rates up to 250 kbps, and is packaged in a 16-pin SOIC. It is intended for systems that need two bidirectional RS-232 channels implemented with one interface IC.
What is the operating voltage range of MAX3232IDWRE4?
The MAX3232IDWRE4 operates from 3 V to 5.5 V. This range allows the transceiver to work with both 3.3 V and 5 V system rails. According to the Texas Instruments datasheet, the device includes on-chip charge-pump circuitry for generating the bipolar voltage levels required by an RS-232 interface. External charge-pump capacitors are still required.
What is the maximum data rate of MAX3232IDWRE4?
The MAX3232IDWRE4 supports a maximum data rate of 250 kbps. According to the MAX3232 datasheet, the device combines two drivers and two receivers in a 16-SOIC package. This data rate is suitable for common UART-based RS-232 equipment, including industrial controllers, instruments, scanners, and legacy computer serial interfaces.
Is MAX3232IDWRE4 pin-compatible with MAX3232IDWR?
Yes, the MAX3232IDWR is a 16-SOIC version of the same MAX3232 device and is pin-compatible with MAX3232IDWRE4. According to the manufacturer product comparison, the MAX3232E family is an improved direct drop-in replacement for the original MAX3232. The E4 suffix identifies the tape-and-reel order configuration, so both parts use the same electrical and mechanical platform.
What is the best drop-in replacement for MAX3232IDWRE4?
The MAX3232IDWR is the closest same-manufacturer drop-in option for the MAX3232IDWRE4 because it uses the same 16-SOIC package and MAX3232 electrical function. Texas Instruments also identifies MAX3232E as an improved direct drop-in replacement for MAX3232. When choosing another manufacturer, verify the complete pinout, charge-pump topology, shutdown behavior, and logic thresholds before replacing the part.
Where can I buy MAX3232IDWRE4 and check its price?
Use the Request a Quote form on this page to request the current price, stock position, order quantity, and lead time for MAX3232IDWRE4. The form connects the request directly with XAIPART rather than presenting a static price that may change. For an exact purchasing decision, include your required reel quantity, target shipment date, and any required manufacturer traceability.
What is the lead time for MAX3232IDWRE4?
The current production lead time for MAX3232IDWRE4 should be confirmed through the Request a Quote form on this page. Include the required reel quantity, factory quantity, and target delivery date in the request. Because availability can vary by package configuration and order volume, a firm scheduling commitment should be based on the quotation response rather than a generic inventory statement.
Is MAX3232IDWRE4 in stock?
Current stock for MAX3232IDWRE4 is best confirmed through the Request a Quote form on this page. State the required quantity, whether full reels or cut tape are acceptable, and your desired delivery date. The device is a 16-SOIC industrial-temperature RS-232 transceiver, so the quote should be checked against the exact MAX3232IDWRE4 orderable suffix before an order is released.
Where to download the MAX3232IDWRE4 datasheet PDF?
The manufacturer datasheet is linked from the datasheet area on this page and is also accessible through the Texas Instruments MAX3232 product documentation. It defines the electrical characteristics, pin functions, charge-pump connections, timing, and application information for MAX3232 devices. The MAX3232IDWRE4 ordering information identifies a 16-SOIC package and industrial temperature range.
Where can I find the MAX3232IDWRE4 pinout?
The MAX3232IDWRE4 pinout appears in the package diagram on this page and in the manufacturer datasheet's pin-description table. The device has 16 leads in a 16-SOIC package. Confirm the driver inputs, receiver outputs, charge-pump capacitor terminals, VCC connection, and ground assignments against the datasheet before assigning PCB tracks.
MAX3232IDWRE4 vs MAX3232EIDR — which is better for a new design?
The MAX3232EIDR is generally preferable for a new design because Texas Instruments describes MAX3232E as an improved direct drop-in replacement for MAX3232. Both families provide a dual RS-232 transceiver in a 16-SOIC package and operate in the same 3 V to 5.5 V supply class. The choice should also consider lifecycle policy, qualification requirements, and whether the E-family electrical improvements are valuable for the target application.
When should I choose MAX3232IDWRE4 over an alternative transceiver?
Choose MAX3232IDWRE4 when the design requires two drivers, two receivers, a 3 V to 5.5 V supply, data rates up to 250 kbps, and a 16-SOIC footprint. Its specified -40°C to 85°C industrial range and ±15 kV ESD protection on serial-port pins make it suitable for industrial equipment. Select an alternative only after confirming equivalent pinout, charge-pump behavior, and channel performance.
Is MAX3232IDWRE4 suitable for industrial RS-232 equipment?
The MAX3232IDWRE4 is suitable for industrial RS-232 equipment requiring two communication channels. It is specified over -40°C to +85°C, operates from 3 V to 5.5 V, and provides ±15 kV ESD protection on the serial-port connection pins according to the manufacturer documentation. Industrial qualification also requires attention to connector grounding, surge exposure, and system-level isolation.
What can replace MAX3232IDWRE4?
The MAX3232IDWR and the MAX3232E family are direct same-footprint choices for the MAX3232IDWRE4. Cross-brand options identified as compatible include the ADM3202ARWZ-REEL, SP3232EET-L, and ICL3232IBNZ, each in a related 16-SOIC format. A replacement should not be treated as interchangeable until its pinout, external capacitor requirements, logic thresholds, shutdown function, and data rate are checked.
What are the key specifications of MAX3232IDWRE4 that engineers should know?
The principal MAX3232IDWRE4 specifications are two drivers, two receivers, a 3 V to 5.5 V operating supply, a 250 kbps maximum data rate, and a 16-SOIC package measuring 7.50 mm wide. The device is rated from -40°C to +85°C and provides ±15 kV ESD protection on serial-port connection pins. These characteristics define its suitability for dual-channel industrial RS-232 interfaces.
What is the Analog Devices equivalent for MAX3232IDWRE4?
The ADM3202ARWZ-REEL is an Analog Devices cross-reference candidate for the MAX3232IDWRE4 and is associated with a 16-SOIC-style package. According to the compatibility listing, it offers similar RS-232 transceiver functionality. Before using it as a drop-in replacement, compare the manufacturer pin tables, charge-pump capacitor values, driver and receiver thresholds, shutdown pins, and maximum data rate.

بيانات مرجعية هندسية لـ MAX3232IDWRE4 — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose MAX3232IDWRE4 when a new or existing industrial design needs a 16-SOIC dual RS-232 transceiver operating from 3 V to 5.5 V at rates up to 250 kbps. Choose MAX3232IDWR when maintaining the original MAX3232 platform or when its order configuration is preferable; its published supply range and data rate match the target. For a new design, consider MAX3232EIDR or MAX3232ECDR because Texas Instruments describes MAX3232E as an improved direct drop-in replacement. ADM3202ARWZ-REEL, SP3232EET-L, and ICL3232IBNZ are cross-brand candidates for dual-channel RS-232 interfaces, but their pinouts, charge-pump capacitors, shutdown functions, thresholds, and maximum rates must be checked before PCB reuse. For exposed cables, add connector-level protection and verify grounding even though the target provides ±15 kV ESD protection on its serial-port pins.

المقارنة مع البدائل

المعامل هذا المنتج MAX3232IDWR MAX3232EIDR MAX3232ECDR ADM3202ARWZ-REEL SP3232EET-L
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Analog Devices Exar

أبرز الفروقات

  • Exact same-family alternative with identical headline electrical ratings (مقابلMAX3232IDWR)
  • Manufacturer-recommended improved family for new designs (مقابلMAX3232EIDR)
  • Dual-channel integration reduces interface component count (مقابلADM3202ARWZ-REEL)
  • Specified industrial temperature and ESD capability (مقابلSP3232EET-L)

ملاحظات التصميم

Place the charge-pump capacitors as close as practical to their associated MAX3232IDWRE4 pins, and minimize loop area around the flying-capacitor and storage-capacitor connections. Use the capacitance and tolerance specified by the manufacturer datasheet. Short, direct traces reduce switching transients and help the charge-pump circuitry maintain stable RS-232 output levels.

Do not assume that every 16-SOIC RS-232 transceiver has an identical pin arrangement or external-capacitor configuration. Before substituting MAX3232IDWR, MAX3232E, ADM3202ARWZ, SP3232E, or ICL3232IBNZ, compare the complete pin-description tables, charge-pump connections, shutdown functions, driver polarity, receiver thresholds, and data-rate ratings against the existing PCB.

Route RS-232 driver outputs directly toward the connector and keep receiver inputs away from noisy digital, switching-power, and relay paths. Maintain a consistent signal-ground reference between the transceiver and connector. For externally accessible cables, evaluate connector-level surge and ESD protection separately from the MAX3232IDWRE4's specified ±15 kV pin protection.

Check UART baud rate, cable length, connector wiring, and the host's DTE or DCE configuration before release. The MAX3232IDWRE4 supports rates up to 250 kbps, but the complete link also depends on the host UART, cable characteristics, grounding, and loading. For noisy industrial installations, verify that the interface remains stable under worst-case supply and cable conditions.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The MAX3232IDWRE4 is an industrial-temperature interface IC. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations should be confirmed from the current manufacturer product documentation or declaration before use in a regulated production design.

تم التحقق من البيانات في: 2026-11-09 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

MAX3232IDWRE4 datasheet MAX3232IDWRE4 pinout MAX3232IDWRE4 datasheet pdf Texas Instruments MAX3232IDWRE4 MAX3232IDWRE4 equivalent MAX3232IDWRE4 replacement MAX3232IDWRE4 vs MAX3232IDWR MAX3232IDWRE4 vs MAX3232EIDR MAX3232IDWRE4 cross reference MAX3232IDWRE4 16-SOIC footprint MAX3232IDWRE4 application circuit MAX3232IDWRE4 price MAX3232IDWRE4 stock

المكونات والمصطلحات ذات الصلة

Texas Instruments MAX3232IDWRE4 MAX3232IDWR MAX3232EIDR MAX3232ECDR ADM3202ARWZ-REEL SP3232EET-L ICL3232IBNZ RS-232 RS-232 transceiver dual line driver dual line receiver interface IC charge-pump converter UART TIA/EIA-232-F 16-SOIC SOIC package family surface-mount package 3 V to 5.5 V power supply 250 kbps data rate ESD protection industrial temperature grade
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر