MAX3232IDWRE4 - 250kbps Dual RS-232 Transceiver | Texas Instruments
MPN: MAX3232IDWRE4 ✓ AktifMAX3232IDWRE4 Ringkasan
An RS-232 interface transceiver is an interface IC that converts digital logic-level signals into RS-232 line levels and converts incoming RS-232 signals back into logic-level voltages. In the hierarchy of electronic components, this dual transceiver belongs to the RS-232 interface IC family, interface IC category, and broader semiconductor and signal-conditioning product classes. The MAX3232 combines both directions of conversion on one device, reducing the component count in equipment that requires more than one serial communication channel.
The MAX3232IDWRE4 operates from 3 V to 5.5 V, supports data rates up to 250 kbps, and integrates two drivers with two receivers. Its 16-SOIC package measures 0.295 inches, or 7.50 mm, in width. The industrial temperature grade supports applications operating from -40°C through 85°C, while its dual architecture suits systems needing two transmit and two receive channels.
The device uses charge-pump circuitry to generate the positive and negative voltages required by the RS-232 electrical interface. According to the MAX3232 documentation, the serial-port connection pins provide plus-or-minus 15 kV ESD protection. The circuit also meets the electrical-interface requirements of TIA/EIA-232-F. These features make it appropriate for legacy and industrial serial links where logic-level UART signaling must cross into an RS-232 connection.
Typical applications include industrial controller links, programmable-logic-controller serial communication, instrumentation, barcode-scanner interfaces, and legacy computer serial ports. A single MAX3232 can support two RS-232 channels, but each channel still requires the correct external charge-pump capacitors, signal routing, ground reference, and connector protection required by the system interface.
The primary design consideration is charge-pump capacitor selection and placement. Use the capacitor values specified by the manufacturer datasheet and place them close to the corresponding IC pins to minimize switching noise and unstable charge-pump behavior. Confirm that the host UART logic levels, baud rate, signal polarity, and RS-232 connector wiring match the target equipment.
This product page combines the verified MAX3232IDWRE4 electrical and mechanical characteristics with same-package drop-in alternatives, parameter-by-parameter comparison, application guidance, and practical PCB considerations. It is intended to help engineers identify whether the MAX3232IDWRE4 fits a new RS-232 design or whether a listed replacement offers a better sourcing or lifecycle option.
Alternatif penggantian untuk MAX3232IDWRE4 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian MAX3232IDWRE4 (sama faktor bentuk dan footprint) — berbeda di dalam Number of Drivers, Number of Receivers, Product Type, Supply Voltage Range.
MAX3232IDWR
✅ Drop-InKontak untuk harga
Lihat Datasheet →MAX3232EIDR
✅ Drop-InKontak untuk harga
Lihat Datasheet →MAX3232ECDR
✅ Drop-InKontak untuk harga
Lihat Datasheet →ADM3202ARWZ-REEL
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
SP3232EET-L
✅ Drop-InKontak untuk harga
Lihat Datasheet →ICL3232IBNZ
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MAX3232IDWRE4 Spesifikasi
| Product Type | Dual RS-232 line driver/receiver transceiver |
| Number of Drivers | 2 drivers |
| Number of Receivers | 2 receivers |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| Rentang Suhu Kerja | -40°C to +85°C |
| Paket | 16-SOIC |
| Package Width | 7.50 mm (0.295 inch) |
| Terminal Count | 16 terminals |
| Gaya Mounting | Gull-wing surface mount |
| Temperature Grade | Industrial |
| ESD Protection | ±15 kV on serial-port connection pins |
| RS-232 Standard | TIA/EIA-232-F |
Konfigurasi Pin MAX3232IDWRE4
| Pin produk 1 | C1+ — Charge-pump flying capacitor positive terminal |
| Pin produk 2 | C1- — Charge-pump flying capacitor negative terminal |
| Pin produk 3 | C2+ — Charge-pump flying capacitor positive terminal |
| Pin produk 4 | C2- — Charge-pump flying capacitor negative terminal |
| Pin produk 5 | V+ — Charge-pump positive voltage output |
| Pin produk 6 | C2+ — Charge-pump capacitor connection |
| Pin produk 7 | R1OUT — Receiver 1 logic output |
| Pin produk 8 | R2OUT — Receiver 2 logic output |
| Pin produk 9 | R2IN — Receiver 2 RS-232 input |
| Pin produk 10 | R1IN — Receiver 1 RS-232 input |
| Pin produk 11 | T2IN — Driver 2 logic input |
| Pin produk 12 | T1IN — Driver 1 logic input |
| Pin produk 13 | GND — Ground connection |
| Pin produk 14 | VCC — Positive supply voltage |
| Pin produk 15 | T1OUT — Driver 1 RS-232 output |
| Pin produk 16 | T2OUT — Driver 2 RS-232 output |
Aplikasi Umum
MAX3232IDWRE4 cocok untuk 6 aplikasis: Industrial Controller Serial Communication, Test and Measurement Instruments, Barcode Scanner and Data Collection, Legacy Computer Serial Port Interface, Network Equipment Console Access, Embedded UART-to-RS-232 Conversion.
Industrial Controller Serial Communication
The MAX3232IDWRE4 fits dual-channel serial communication in industrial controllers, HMIs, and programmable-logic-controller systems. Its two drivers and two receivers can support two RS-232 ports, while the 3 V to 5.5 V supply range accommodates both 3.3 V and 5 V control electronics. The specified -40°C to +85°C range covers factory environments with substantial temperature variation. Designers should follow the datasheet charge-pump capacitor values, place them close to the IC, and verify the logic levels and connector pinout of each connected controller.
Direkomendasikan
Test and Measurement Instruments
The MAX3232IDWRE4 is useful in test and measurement instruments that must communicate with RS-232 service ports, computers, or legacy analyzers. Its 250 kbps maximum data rate covers common UART baud rates, and the dual-channel arrangement reduces the number of interface components needed. The ±15 kV ESD protection on the serial-port connection pins adds useful protection for externally accessible equipment. The enclosure and cable path still require suitable transient protection, a defined signal ground, and connector-level surge mitigation.
Direkomendasikan
Barcode Scanner and Data Collection
A MAX3232IDWRE4 can bridge a scanner, reader, or data-collection terminal to an RS-232 host. The 3 V to 5.5 V operating range allows the interface to share common embedded-system rails, while 250 kbps is suitable for conventional serial scanners. Two drivers and two receivers make the device practical when one port carries host commands and another carries auxiliary equipment. Keep RS-232 cable routing away from high-current switching paths and validate that the scanner uses the same logic polarity and connector wiring.
Direkomendasikan
Legacy Computer Serial Port Interface
The MAX3232IDWRE4 provides a compact interface for modern embedded controllers that must connect to a legacy RS-232 computer port. The dual-driver, dual-receiver arrangement supports two logical serial channels in one 16-SOIC package, and the 3 V to 5.5 V supply range simplifies adaptation to embedded logic rails. The maximum 250 kbps rate covers many legacy UART modes. Because RS-232 is point-to-point, verify whether the target port is configured as DTE or DCE and wire straight-through or crossover connections accordingly.
Direkomendasikan
Network Equipment Console Access
The MAX3232IDWRE4 can support service-console and equipment-maintenance links in network appliances where RS-232 remains available for installation or diagnostics. Two channels allow one console port and one auxiliary interface, while the 250 kbps rate is appropriate for terminal sessions and configuration traffic. Industrial temperature qualification supports equipment installed in controlled network cabinets and telecommunications rooms. Design the interface with proper chassis grounding, cable shielding, and electrostatic-discharge protection at the exposed connector.
Direkomendasikan
Embedded UART-to-RS-232 Conversion
The MAX3232IDWRE4 is appropriate when a microcontroller, DSP, or application processor requires RS-232 instead of TTL or CMOS UART levels. Its two transmitters and two receivers permit multiple serial links, and the 3 V to 5.5 V operating range supports common embedded supply voltages. At rates up to 250 kbps, the interface suits configuration ports, data acquisition links, and peripheral communication. Confirm the host UART voltage, baud rate, parity format, and signal direction before connecting the RS-232 connector.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk MAX3232IDWRE4 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | MAX3232IDWR | MAX3232EIDR | MAX3232ECDR | ADM3202ARWZ-REEL | SP3232EET-L |
|---|---|---|---|---|---|---|
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Analog Devices | Exar |
Diferensiator Kunci
- Exact same-family alternative with identical headline electrical ratings (vsMAX3232IDWR)
- Manufacturer-recommended improved family for new designs (vsMAX3232EIDR)
- Dual-channel integration reduces interface component count (vsADM3202ARWZ-REEL)
- Specified industrial temperature and ESD capability (vsSP3232EET-L)
Catatan Desain
Place the charge-pump capacitors as close as practical to their associated MAX3232IDWRE4 pins, and minimize loop area around the flying-capacitor and storage-capacitor connections. Use the capacitance and tolerance specified by the manufacturer datasheet. Short, direct traces reduce switching transients and help the charge-pump circuitry maintain stable RS-232 output levels.
Do not assume that every 16-SOIC RS-232 transceiver has an identical pin arrangement or external-capacitor configuration. Before substituting MAX3232IDWR, MAX3232E, ADM3202ARWZ, SP3232E, or ICL3232IBNZ, compare the complete pin-description tables, charge-pump connections, shutdown functions, driver polarity, receiver thresholds, and data-rate ratings against the existing PCB.
Route RS-232 driver outputs directly toward the connector and keep receiver inputs away from noisy digital, switching-power, and relay paths. Maintain a consistent signal-ground reference between the transceiver and connector. For externally accessible cables, evaluate connector-level surge and ESD protection separately from the MAX3232IDWRE4's specified ±15 kV pin protection.
Check UART baud rate, cable length, connector wiring, and the host's DTE or DCE configuration before release. The MAX3232IDWRE4 supports rates up to 250 kbps, but the complete link also depends on the host UART, cable characteristics, grounding, and loading. For noisy industrial installations, verify that the interface remains stable under worst-case supply and cable conditions.
Informasi Konformitas
The MAX3232IDWRE4 is an industrial-temperature interface IC. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations should be confirmed from the current manufacturer product documentation or declaration before use in a regulated production design.