Texas Instruments

SN74LS240N - 8-Channel 3-State Buffer | Texas Instruments

MPN: SN74LS240N ✓ نشط
4.75 V to 5.25 V Vdss 20-pin PDIP Package
الحد الأدنى للطلب: 1 |

SN74LS240N نظرة عامة

The Texas Instruments SN74LS240N is an 8-channel inverting buffer and line driver with three-state outputs, designed for 4.75 V to 5.25 V bipolar TTL systems and supplied in a 20-pin PDIP package. Each of the four channels contains two inverter elements, allowing independent control of two output groups through the two output-enable inputs.

A three-state buffer is a digital logic device that can present a low level, a high level, or a high-impedance state on its output. The SN74LS240N belongs to the 74LS TTL family, which occupies the logic buffer, line-driver, and bus-interface level of the broader semiconductor hierarchy. Its three-state outputs allow multiple drivers to share a bus when only one group is enabled at a time.

Key characteristics include eight inverting outputs, four output elements, separate output-enable control for the two groups, and operation from a single 4.75 V to 5.25 V supply. The inverting function reverses the logic state presented at each enabled output. The three-state capability is especially useful in memory-address, clock, and bidirectional bus-interface systems where inactive drivers must be isolated rather than continuously switching a node.

The SN74LS240N is a bipolar 74LS-series device rather than a low-power CMOS interface. This places it in applications built around conventional 5 V TTL logic, where system compatibility, established timing behavior, and direct bus interfacing are more important than very low supply current. Its four output elements are organized as two four-bit groups, and each group has a dedicated output-enable input.

Typical uses include three-state bus drivers, memory-address drivers, clock-distribution buffers, industrial control interfaces, test equipment, and legacy computer or peripheral-control systems. Because every output is inverting, the device is appropriate where inverted logic is expected or where an inversion stage can simplify a wider bus arrangement. A non-inverting bus interface may instead require a different 74LS buffer function.

When laying out a board, keep input and output traces short, provide a stable ground reference, and avoid forcing a three-state output into a logic-high or logic-low state while its driver is disabled. Confirm that enable polarity, propagation delay, fanout, and bus contention requirements fit the surrounding system. Use the manufacturer pin-description table when assigning PCB tracks and checking the two output-enable connections.

This product page combines the SN74LS240N function, package, sourcing guidance, verified alternatives, and practical interface considerations. It also provides engineering-focused comparisons for selecting an inverting three-state bus buffer without confusing it with non-inverting or differently controlled 74LS devices.

بدائل مباشرة لـ SN74LS240N — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع SN74LS240N (نفس عامل الشكل والبصمة) — يختلف في Bits per Element, Logic Type, Number of Elements, Output State.

onsemi
Bits per Element: 4 bits
Logic Type: Bipolar inverter
Number of Elements: 2 elements
قارن مع SN74LS240N →

DM74LS240N

✅ بديل مباشر
📦 DIP-20
Same 20-pin through-hole 74LS240 function; manufacturer and qualification details differ, with the verified comparison showing 20 pins and the same through-hole mounting style

📋 بديل مرجعي (غير موجود في الكتالوج)

SN74LS240N

✅ بديل مباشر
Texas Instruments
📦 DIP-20
8 channels · 2 elements per device · 4 bits per element · Inverting buffer and line driver · Three-state output · 4.75 V to 5.25 V · 2 inputs · 20-pin PDIP

تواصل لمعرفة السعر

عرض ورقة البيانات ←

SN74LS240N الحدود القصوى والخصائص الكهربائية

Number of Channels 8 channels
Number of Elements 2 elements per device
Bits per Element 4 bits per element
Logic Type Inverting buffer and line driver
Output State Three-state output
Supply Voltage Range 4.75 V to 5.25 V
Output Enable Inputs 2 inputs
العلبة 20-pin PDIP
نوع التركيب Through-hole
Logic Family 74LS bipolar TTL

دليل تكوين أطراف SN74LS240N 20-pin pdip

تكوين الأطراف لـ SN74LS240N (حزمة 20-pin pdip). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.

مخطط توزيع أطراف حزمة 20-pin pdip لـ SN74LS240N

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ SN74LS240N.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

SN74LS240N مناسب لـ 6 التطبيقs: Memory Address Buffering, Three-State Data Bus Interface, Clock Distribution Buffering, Industrial Control Logic Interface, Legacy Peripheral Bus Interface, Test and Measurement Logic.

🖥️

Memory Address Buffering

The SN74LS240N fits conventional 5 V memory-address systems because it provides eight buffered, inverting outputs in two independently enabled groups of four. Placing one group on an address bus allows the outputs to switch between normal logic and high impedance without holding the bus in a conflicting state. This is useful when several address sources must share a bus, although the inverting behavior must match the memory’s expected address convention. The 4.75 V to 5.25 V operating range aligns with standard 74LS TTL systems. During design, verify enable sequencing, propagation timing, fanout, and the polarity of every address bit before releasing a group onto the shared bus.

💻

Three-State Data Bus Interface

The SN74LS240N is useful in a 5 V three-state bus interface because its eight outputs can become high impedance when their associated enable group is inactive. The two enable inputs permit only one four-bit driver group to operate at a time, reducing bus contention when several devices share a bus. Its buffered outputs support longer PCB routes than an unbuffered logic output, while the inverting action can complement data arriving from a non-inverting source. The designer should still check fanout, rise and fall times, enable setup requirements, and contention timing. High-impedance outputs must not be pulled to an active level by another driver during bus transfer.

⏱️

Clock Distribution Buffering

The SN74LS240N can distribute a clock signal across eight loads while providing inverting outputs and a high-impedance disable state. The four-output groups permit clock routing to be separated, disabled, or enabled according to the system architecture, and the buffer function helps isolate the source from downstream loading. Because inversion changes clock polarity, downstream sequential logic must be configured for the resulting edge relationship. The 4.75 V to 5.25 V supply range is suitable for 74LS systems, but timing margin, fanout, and skew should be evaluated across every enabled channel. Disable all outputs during the required safe interval whenever a downstream device could otherwise be driven by more than one source.

🏭

Industrial Control Logic Interface

The SN74LS240N can act as an interface stage in a 4.75 V to 5.25 V industrial control system that retains classic TTL logic. Eight buffered channels provide practical fanout for control, status, or peripheral-interface signals, while the grouped enables allow unused outputs to remain isolated. The bipolar 74LS implementation suits established 5 V control architectures where logic thresholds and timing are already standardized. In a cabinet or industrial controller, route outputs away from long unprotected harness runs and provide suitable interfacing for external signals. Validate the external logic levels, enable defaults during reset, and the effect of inversion on alarms, interlocks, and machine-control sequences before connecting field wiring.

🔧

Legacy Peripheral Bus Interface

The SN74LS240N is appropriate for legacy 5 V peripheral systems that require an inverting, three-state octal bus driver. It can isolate an inactive peripheral driver while another device owns the bus, reducing the number of external components needed for bidirectional-style bus arbitration. Its four-output enable arrangement supports grouped bus ownership, and its 20-pin PDIP package is convenient for repair and through-hole industrial boards. However, the SN74LS241N or SN74LS244N should be considered when the original bus expects non-inverting signals. Verify connector pin assignments, reset behavior, signal polarity, and timing against the original equipment schematic before replacing the device.

🧰

Test and Measurement Logic

The SN74LS240N can support legacy test equipment by buffering control or address signals and placing unused drivers into the high-impedance state. Its eight channels cover a full byte, while separate four-channel enable control allows a fixture or tester to isolate sections of the interface. The inverting outputs may directly match an existing TTL test architecture, removing an unnecessary inversion stage. For instrumentation, ensure that disabled outputs do not interfere with external programmable devices and that bus ownership changes only during defined control intervals. Confirm operating temperature, power-supply tolerance, and electrical timing against the enclosure environment, since the device is a bipolar 5 V part rather than a modern low-voltage CMOS device.

ملخص المنتجات الموصى بها

SN74LS240 Manufacturer family containing the SN74LS240N يُستخدم في: Memory Address Buffering, Industrial Control Logic Interface DM74LS240N 20-pin 74LS240 family alternative يُستخدم في: Memory Address Buffering, Clock Distribution Buffering SN74LS244N Texas Instruments يُستخدم في: Three-State Data Bus Interface, Clock Distribution Buffering, Industrial Control Logic Interface, Legacy Peripheral Bus Interface SN74LS241N Texas Instruments يُستخدم في: Three-State Data Bus Interface, Legacy Peripheral Bus Interface SN74LS75N Related 74LS buffered logic family يُستخدم في: Test and Measurement Logic SN74LS598N Related registered 8-bit TTL logic device يُستخدم في: Test and Measurement Logic
What is the function of the SN74LS240N?
The SN74LS240N is an 8-channel inverting buffer and line driver with three-state outputs for 4.75 V to 5.25 V TTL systems. It contains four 4-bit output elements, and two output-enable inputs control the two groups of four outputs. When an output group is enabled, each output follows the inverted state of its corresponding input; when disabled, the outputs enter a high-impedance state. Texas Instruments describes the SN74LS240 family as an octal bipolar buffer and line driver intended for memory-address, clock, and bus-oriented interfacing.
What supply voltage does the SN74LS240N operate from?
The SN74LS240N operates from a single 4.75 V to 5.25 V supply, placing it in the standard 5 V TTL operating range. According to the Texas Instruments SN74LS240 product information, the device uses bipolar 74LS-series logic. The supply range is important for interface design because systems using 3.3 V or other voltage domains require level translation or a suitable interface buffer between the external circuitry and the SN74LS240N.
Where can I download the SN74LS240N datasheet PDF?
The official SN74LS240 datasheet is available through the Texas Instruments product page at https://www.ti.com/product/SN74LS240. The verified search results also identify downloadable SN74LS240N documents through Alldatasheet, including a 16-page document and a consolidated SNx4LS24x document with 41 pages. Use the Texas Instruments document for primary design decisions, including the complete 20-pin connection table, recommended operating conditions, and electrical characteristics.
Where can I find the SN74LS240N pinout?
The SN74LS240N pinout is found in the connection diagram and pin-description table in the Texas Instruments SN74LS240 datasheet. The device is packaged in a 20-pin PDIP and provides eight data inputs, eight outputs, a ground connection, a 5 V supply connection, and two output-enable inputs. Use the manufacturer connection diagram when assigning PCB tracks because it identifies the enabled and high-impedance states for each output group.
Is the SN74LS240N inverting or non-inverting?
The SN74LS240N is an inverting buffer and line driver. An enabled output produces the opposite logic state from its corresponding input, while a disabled output enters the high-impedance state. This differs from the SN74LS244N, which provides non-inverting three-state outputs. The distinction is fundamental: an existing bus design that expects inverted signals can use the SN74LS240N directly, whereas a non-inverting bus may require a different 74LS buffer or an additional inversion stage.
How do the two output-enable inputs on the SN74LS240N work?
The SN74LS240N has two output-enable inputs that control separate four-output groups, giving each group of four channels independent enable control. Enabling a group allows its four inverting outputs to drive normally, while disabling it places those outputs in the high-impedance state. This arrangement supports shared-bus systems because only the intended driver group should be active while another driver is connected to the same node.
Can the SN74LS240N be used as a memory-address driver?
Yes, the SN74LS240N is suitable for memory-address driving because its eight three-state outputs provide buffered, inverting signals while allowing unused driver groups to be disabled. Its 4.75 V to 5.25 V supply range matches conventional 74LS TTL systems. During address multiplexing, the enable inputs should be sequenced so that only the currently valid address source drives the shared address lines. The manufacturer describes the SN74LS240 family as being designed to improve performance and density in three-state memory-address drivers.
When should I choose the SN74LS240N over the SN74LS244N?
Choose the SN74LS240N when the bus requires inverting signals, and choose the SN74LS244N when non-inverting signals are required. Both devices provide eight three-state outputs in a 20-pin PDIP-style implementation, but their inversion behavior differs. Texas Instruments identifies the SN74LS240 as an inverting octal buffer and line driver, while the SN74LS244 belongs to the non-inverting octal-buffer family. The correct selection is therefore determined primarily by signal polarity, not by bus width.
SN74LS240N vs SN74LS241N - which is the better bus interface?
The SN74LS240N is the better choice when the interface requires eight inverting three-state outputs, while the SN74LS241N provides a non-inverting arrangement for its four upper channels. Both devices are 74LS-family octal buffers in 20-pin packages and support 4.75 V to 5.25 V operation. Select according to the required logic polarity of every bus bit and the intended output-enable behavior; do not treat the two parts as interchangeable merely because their channel counts match.
Is the SN74LS240N suitable for a 3.3 V logic system?
The SN74LS240N should not be connected directly to a 3.3 V system without confirming the input and output thresholds and designing appropriate level translation. Its specified supply range is 4.75 V to 5.25 V, and the device belongs to the bipolar 74LS family rather than a 3.3 V-compatible CMOS family. For a mixed-voltage board, place a suitable translator or interface device between the 3.3 V domain and the SN74LS240N, paying particular attention to output-enable signals and bus contention.
What can replace the SN74LS240N on the same PCB?
The DM74LS240N is a cross-brand replacement identified by the verified 74LS cross-reference material as a through-hole, 20-pin equivalent to the SN74LS240N. Before substitution, confirm the exact output-enable polarity, timing, supply range, and temperature grade in the candidate manufacturer's datasheet. A listed SN74LS240N from another manufacturer may also represent the same function and footprint, but its source-specific quality, lifecycle, and marking should be reviewed before production use.
Where can I buy SN74LS240N online?
Use the Request a Quote form on this page to request SN74LS240N pricing, current availability, minimum order quantity, and lead time. The Texas Instruments product page identifies the SN74LS240 family, while the verified SN74LS240N listing identifies the exact 20-pin PDIP device. Because production status and stock can change by package and manufacturer, request the exact MPN SN74LS240N rather than substituting the broader family designation SN74LS240.
What is the price of SN74LS240N?
The current commercial terms for SN74LS240N should be obtained through the Request a Quote form on this page because pricing and availability are refreshed by the platform. Submit the exact 20-pin PDIP MPN, SN74LS240N, and indicate the required quantity, shipment destination, and target date. The structured pricing area may show a reference amount, but a firm quotation should reflect current market conditions, quantity breaks, and confirmed availability.
What is the lead time for SN74LS240N?
Request the current SN74LS240N lead time through the Request a Quote form on this page, specifying the required quantity and shipment location. The manufacturer product page confirms the SN74LS240 family, but lead time can vary with package inventory, production status, and order volume. Buyers should also state whether they need the exact SN74LS240N PDIP designation or can approve an equivalent 20-pin 74LS240-family source after technical review.
Is SN74LS240N in stock?
Check the current stock position through the Request a Quote form on this page and request confirmation for the exact SN74LS240N ordering code. The device is listed as a 20-pin PDIP octal inverting buffer and line driver, but inventory can vary by manufacturer, date, and order quantity. Avoid approving a substitute solely from a generic 74LS240 family label because package, enable polarity, timing grade, and lifecycle status should be checked before use.
What are the key specifications of SN74LS240N that engineers should know?
The key SN74LS240N specifications are 8 inverting outputs, four 4-bit elements, two independently controlled output-enable groups, a 4.75 V to 5.25 V supply range, three-state output capability, and a 20-pin PDIP package. The device is designed for 74LS TTL memory-address, clock, and bus-interface systems. Its inverting behavior and grouped output enables distinguish it from the non-inverting SN74LS244 and from the mixed-polarity SN74LS241.

بيانات مرجعية هندسية لـ SN74LS240N — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the SN74LS240N when the design needs eight inverting, three-state outputs from a 20-pin through-hole package and operates from a 4.75 V to 5.25 V TTL supply. It is particularly suitable for legacy address, clock, and bus interfaces where grouped output enables permit unused drivers to be isolated. Select the onsemi SN74LS240N when equivalent function and packaging are needed for source diversification, after reviewing its manufacturer-specific datasheet and qualification information. The DM74LS240N is another cross-brand 74LS240-family option with the same 20-pin through-hole format, but its exact supply, timing, and temperature details should be confirmed before substitution. Do not select the SN74LS241N or SN74LS244N as automatic replacements: those devices use different output-polarity arrangements. The SN74LS240N is most appropriate when inversion is required, three-state bus control is essential, and the surrounding circuitry already uses conventional bipolar TTL levels.

المقارنة مع البدائل

المعامل هذا المنتج DM74LS240N SN74LS240N
Brand Texas Instruments National Semiconductor onsemi
Package 20-pin PDIP DIP-20 20-pin PDIP
Function Octal inverting buffer and line driver 74LS240 octal buffer and line driver Buffer, inverting, three-state output
Output Configuration Three-state Three-state Three-state
Number of Channels 8 channels 8 channels 8 channels
Mounting Style Through-hole Through-hole Through-hole
Number of Pins 20 pins 20 pins 20 pins

أبرز الفروقات

  • Provides eight inverting three-state outputs in one 20-pin package (مقابلDM74LS240N)
  • Groups the outputs into two independently enabled four-channel sections (مقابلSN74LS240N)
  • Supports conventional 5 V TTL systems (مقابلDM74LS240N)

ملاحظات التصميم

Never allow two enabled three-state driver groups to control the same bus node at the same time. The SN74LS240N outputs become high impedance only when their associated output-enable function commands that state. Sequence enable and disable controls with non-overlap timing, account for propagation delay, and establish a defined state during reset. This prevents current contention, undefined bus voltage, and damage to connected outputs.

Treat each enabled output as a standard 74LS TTL driver and include the destination input capacitance in the timing budget. Avoid long branches from a shared output node, use a ground reference close to the device, and keep the enable traces short enough to avoid unequal switching arrival times. Because the outputs are inverting, include the inversion in clock-edge and control-signal timing rather than treating the device as a transparent buffer.

Use the Texas Instruments connection diagram to assign all 20 PDIP positions, including supply and ground. Place the device away from high-current switching nodes, route outputs as short as practical, and avoid long stubs in multi-drop bus layouts. When replacing the SN74LS240N on an existing board, verify physical pin orientation and the enable polarity rather than relying only on the 74LS240 family name.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

Compliance attributes were not explicitly identified in the verified product, distributor, or cross-reference results.

تم التحقق من البيانات في: 2026-11-14 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

sn74ls240n datasheet SN74LS240N datasheet pdf SN74LS240N pinout SN74LS240N DIP-20 SN74LS240N equivalent SN74LS240N replacement SN74LS240N cross reference SN74LS240N vs DM74LS240N SN74LS240N price SN74LS240N stock Texas Instruments SN74LS240N SN74LS240N three-state output SN74LS240N memory address driver SN74LS240N 4.75V 5.25V

المكونات والمصطلحات ذات الصلة

Texas Instruments SN74LS240 SN74LS240N onsemi SN74LS240N National Semiconductor DM74LS240N SN74LS241N SN74LS244N 74LS TTL three-state buffer line driver inverting buffer high-impedance output bus interface memory-address driver clock driver output-enable input PDIP-20 DIP-20 bipolar logic 4.75 V 5.25 V fanout propagation delay
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر