Xilinx

XC2C64A-7PCG44I - 64-Macrocell 7ns CPLD | Xilinx

MPN: XC2C64A-7PCG44I ✗ انتهى عمره الإنتاجي
44-pin VQFP Package -7 Speed Nonvolatile configuration storage Memory
الحد الأدنى للطلب: 1 |

XC2C64A-7PCG44I نظرة عامة

The Xilinx XC2C64A-7PCG44I is a CoolRunner-II complex programmable logic device with 64 macrocells, approximately 1,500 usable gates, a -7 speed grade, and 33 user I/O pins in a 44-pin VQFP package. It combines advanced CMOS programmable logic with intelligent power-management features for designs requiring compact, low-power implementation of control, interface, and glue logic.

A complex programmable logic device is a programmable semiconductor that combines a structured logic architecture with nonvolatile configuration storage. In the programmable-logic hierarchy, a CPLD sits between simple fixed-function logic and an FPGA: it offers macrocell-based logic implementation, predictable interconnect delays, and retained configuration in a compact package. The XC2C64A belongs to the CoolRunner-II family, designed for both high-performance and low-power portable equipment.

The device provides 64 macrocells and approximately 1,500 usable gates, with 33 user I/O pins available in the PCG44 package. The -7 suffix identifies the higher-performance speed grade. Its I/O architecture supports LVCMOS operation in 3.3 V, 2.5 V, and 1.8 V systems, while 1.5 V compatibility can be achieved by using Schmitt-trigger inputs. Intelligent power management helps reduce consumption when the device is inactive.

CoolRunner-II architecture uses configurable logic blocks and dedicated interconnect resources, making routing behavior more predictable than in a general-purpose FPGA. This characteristic is useful for control logic, bus arbitration, state machines, address decoding, and peripheral glue where a modest logic capacity is sufficient but deterministic implementation remains important. The PCG44 package also supports compact board layouts where a larger FPGA would be unnecessary.

Typical applications include industrial controller logic, low-power handheld equipment, communications interfaces, test and measurement systems, and embedded control subsystems. The 33 user I/O count makes the device suitable for parallel buses, status and control registers, clock distribution, and programmable signal conditioning when external fixed-function logic would otherwise consume more board area.

PCB design should follow the package dimensions, exposed-pad or thermal requirements, and recommended decoupling shown in the AMD datasheet. Confirm pin assignments, voltage domains, and supported I/O standards in the pin-description table before routing. Programming must use a compatible CoolRunner-II device programmer and the appropriate design file.

This page combines the XC2C64A-7PCG44I family architecture, package details, verified replacement relationships, and practical selection guidance. It also highlights the distinctions between speed grades and temperature suffixes so engineers can identify a pin-compatible replacement without overlooking device-level qualification requirements.

بدائل مباشرة لـ XC2C64A-7PCG44I — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع XC2C64A-7PCG44I (نفس عامل الشكل والبصمة) — يختلف في Process Technology, Configuration Memory, Package, Device Type, Logic Architecture.

AMD
Process Technology: 0.18 µm CMOS
Configuration Memory: Nonvolatile
Device Type: CoolRunner-II complex programmable logic device
قارن مع XC2C64A-7PCG44I →
Xilinx
Process Technology: 0.18 um
Package: 44-pin PLCC
Device Type: CoolRunner-II Complex Programmable Logic Device
قارن مع XC2C64A-7PCG44I →
Xilinx
Process Technology: 0.18 µm CMOS Flash
Configuration Memory: Flash, nonvolatile
Package: 44-pin VTQFP, 10 mm × 10 mm
قارن مع XC2C64A-7PCG44I →
AMD
Process Technology: 0.18 µm CMOS
قارن مع XC2C64A-7PCG44I →

XC2C64A-7VQG44I

✅ بديل مباشر
AMD
📦 VQFP-44
In-System Programmable · 64 macrocells · 33 I/O · 1,500 gates · 159 MHz · 6.7 ns · 0.18 µm CMOS · 1.8 V

تواصل لمعرفة السعر

عرض ورقة البيانات ←

XC2C64A-7VQG44C

✅ بديل مباشر
Xilinx
📦 VQFP-44
CoolRunner-II complex programmable logic device (CPLD) · 64 macrocells · 4 function blocks · 1,500 gates · 159 MHz · 4.6 ns · 15 µA minimum · 0.18 µm CMOS Flash

تواصل لمعرفة السعر

عرض ورقة البيانات ←

XC2C64A-5VQG44C

✅ بديل مباشر
AMD
📦 VQFP-44
CoolRunner-II complex programmable logic device · In-system programmable · 64 macrocells · 1.5K gates · 33 I/O pins · 159 MHz · 4.6 ns · 0.18 µm CMOS

تواصل لمعرفة السعر

عرض ورقة البيانات ←

XC2C64A-7PCG44C

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
Xilinx
📦 VQFP-44
CoolRunner-II Complex Programmable Logic Device · 64 macrocells · 33 I/O · 1.8 V · -7 · 7.5 ns · 200 MHz · 0.18 um

تواصل لمعرفة السعر

عرض ورقة البيانات ←

XC2C64A-5PCG44I

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 VQFP-44
Retains the 64-macrocell architecture, industrial suffix, and PCG44 package; -5 speed grade is approximately 28.6% slower than the target -7 grade.

📋 بديل مرجعي (غير موجود في الكتالوج)

XC2C64A-7PCG44I الحدود القصوى والخصائص الكهربائية

Device Type CoolRunner-II complex programmable logic device (CPLD)
Logic Capacity 64 macrocells
Usable Gates 1,500 gates
User I/O Pins 33 pins
Speed Grade -7
العلبة 44-pin VQFP
Process Technology Advanced CMOS
Power Management Intelligent power management
3.3 V I/O Standard LVCMOS
2.5 V I/O Standard LVCMOS
1.8 V I/O Standard LVCMOS
1.5 V Input Compatibility Schmitt-trigger inputs
Temperature Grade Industrial grade
Configuration Memory Nonvolatile configuration storage
Logic Architecture Macrocell-based CoolRunner-II architecture
نوع التركيب Surface mount

دليل تكوين أطراف XC2C64A-7PCG44I 44-pin vqfp

تكوين الأطراف لـ XC2C64A-7PCG44I (حزمة 44-pin vqfp). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.

مخطط توزيع أطراف حزمة 44-pin vqfp لـ XC2C64A-7PCG44I

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ XC2C64A-7PCG44I.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

XC2C64A-7PCG44I مناسب لـ 6 التطبيقs: Industrial Controller Logic, Low-Power Portable Equipment, Communications Interface Conditioning, Test and Measurement Control, Embedded System Glue Logic, Audio and Video Interface Support.

🏭

Industrial Controller Logic

The XC2C64A-7PCG44I fits compact industrial control blocks that require deterministic programmable logic without the resource level of an FPGA. Its 64 macrocells and approximately 1,500 usable gates can implement state machines, interlocks, alarm logic, and supervisory sequencing, while the -7 speed grade supports tighter timing margins. The industrial-grade designation is relevant to equipment operating beyond consumer-temperature conditions. Intelligent power management also helps when only part of the logic is active, although final dissipation depends on clocking, I/O activity, voltage, and the implemented design.

📱

Low-Power Portable Equipment

The XC2C64A-7PCG44I is appropriate for portable products that need a small, reconfigurable control engine with 64 macrocells and 33 user I/O pins. It can consolidate power sequencing, button handling, display control, status logic, and low-speed peripheral interfacing into one nonvolatile CPLD. Intelligent power-management features support reduced activity power, while the 44-pin VQFP limits board footprint. For battery-powered equipment, designers should still evaluate energy consumption across active and standby states, because I/O toggling and clock distribution can dominate the programmable-logic contribution.

🌐

Communications Interface Conditioning

The XC2C64A-7PCG44I can implement protocol framing, command decoding, bus arbitration, and interface isolation around communications peripherals. Its 33 user I/O pins provide enough parallel connectivity for control signals, while the -7 grade favors designs with demanding combinational or registered timing. LVCMOS support at 3.3 V, 2.5 V, and 1.8 V permits use with multiple generations of mixed-signal interface components. The design must still honor voltage compatibility, setup and hold requirements, termination, and configuration constraints for every connected bus.

🖥️

Test and Measurement Control

In test and measurement equipment, the XC2C64A-7PCG44I can implement sequencing, trigger conditioning, front-panel control, and glue logic between sensors and a processor. The 64-macrocell limit makes it appropriate for modular instrument control rather than high-channel-count signal processing. The -7 speed class provides additional timing margin for clocked state machines and parallel capture logic. Engineers should use the timing tables to establish setup, hold, clock, and output-delay margins, and should review I/O drive and termination for every instrument signal path.

🔧

Embedded System Glue Logic

The XC2C64A-7PCG44I is useful when a microcontroller or processor requires deterministic companion logic for address decoding, arbitration, interrupt routing, or peripheral sequencing. Sixty-four macrocells and 33 user I/O pins provide a practical capacity limit for those functions while preserving a compact 44-pin VQFP footprint. Nonvolatile configuration permits the logic pattern to remain available after power loss, and the -7 grade can improve timing margin over a -5 device. Final selection should account for worst-case propagation delays and system clock requirements from the manufacturer timing tables.

🎧

Audio and Video Interface Support

The XC2C64A-7PCG44I can support audio or video systems with control-path logic, channel routing, synchronization, and status monitoring. Its macrocell capacity is better suited to control and interface adaptation than complete media processing, while the 33 available user I/O pins can support several parallel data or control lines. The -7 grade benefits clocked routing and registered interfaces. Signal integrity remains application-dependent: impedance, trace length, grounding, and output timing must be evaluated for each bus, particularly when the device interfaces with converters or higher-speed digital components.

What are the key specifications of XC2C64A-7PCG44I that engineers should know?
The XC2C64A-7PCG44I is a 64-macrocell CoolRunner-II CPLD with approximately 1,500 usable gates, 33 user I/O pins, a -7 speed grade, and a 44-pin VQFP package. According to the AMD XC2C64A CoolRunner-II CPLD datasheet DS311, the device is based on an advanced CMOS architecture and supports LVCMOS I/O operation at 3.3 V, 2.5 V, and 1.8 V. These figures make it most appropriate for compact control, interface, and glue-logic designs that do not require the capacity of an FPGA.
Where can I download the XC2C64A-7PCG44I datasheet PDF?
The official XC2C64A CoolRunner-II CPLD datasheet is available from AMD as document DS311. Use the AMD documentation URL on this page for the manufacturer-controlled copy, and use the associated PDF link for the exact XC2C64A-7PCG44I ordering code. The datasheet contains the device pin list, package drawings, electrical characteristics, supported I/O standards, AC timing tables, and programming information needed to select capacitors, routes signals, and verify operating conditions.
What is the XC2C64A-7PCG44I pinout and package layout?
The XC2C64A-7PCG44I uses a 44-pin VQFP package and provides 33 user I/O pins in the target configuration. Pin assignments, power pins, configuration pins, and any dedicated pins must be taken from the XC2C64A datasheet because package code and function should not be inferred from the ordering suffix alone. The manufacturer pin-description table and package drawing should be cross-checked during schematic capture and PCB layout to prevent assignment errors.
Is XC2C64A-7PCG44I the same as XC2C64A-7VQG44C?
The XC2C64A-7VQG44C is a closely related 64-macrocell, 44-pin VQFP CoolRunner-II CPLD, but its suffix identifies a different package and temperature grade from the PCG44I device. The -7 speed grade remains the same. It can be considered only after verifying the physical package drawing, pin table, power configuration, temperature range, and board footprint against the original design; the different package or grade suffix should not be treated as automatically interchangeable.
What is the best drop-in replacement for XC2C64A-7PCG44I?
The closest documented same-family replacement is the 44-pin VQFP XC2C64A-7VQG44I, which retains the -7 speed grade and 64-macrocell CoolRunner-II architecture. The AMD discontinuation notice states that enhanced XC2C64A devices are pin-for-pin replacements for earlier XC2C64 members. Before substitution, compare the PCG44 and VQG44 package drawings, temperature grade, power pins, configuration pins, and I/O limits; any discrepancy requires schematic or PCB review rather than an unqualified replacement.
Can XC2C64A-7VQG44C replace XC2C64A-7PCG44I without PCB changes?
The XC2C64A-7VQG44C uses the same 44-pin VQFP family and -7 speed grade, but a no-change substitution still requires package-dimension and pin-function verification. The PCG44 and VQG44 suffix differences can represent package and temperature-grade distinctions. Confirm lead pitch, body dimensions, pin numbering, power connections, exposed thermal requirements, and the commercial-versus-industrial temperature range before approving a drop-in replacement.
What can replace XC2C64A-7PCG44I in a legacy CPLD design?
A replacement should preserve the 64-macrocell architecture, -7 timing class, 44-pin VQFP footprint, configuration method, and industrial-temperature requirement. XC2C64A-7VQG44I is the leading same-family option because it retains the -7 grade and 44-pin VQFP configuration. If that exact configuration is unavailable, a different speed or temperature suffix can be considered only after reviewing timing, environmental, package, and lifecycle constraints; no cross-brand CPLD should be assumed to be software- and pin-compatible.
XC2C64A-7PCG44I vs XC2C64A-7VQG44I: which is better for an industrial design?
XC2C64A-7PCG44I is identified as an industrial-grade 44-pin VQFP device, while XC2C64A-7VQG44I uses a different package suffix and also carries an industrial suffix. Both belong to the 64-macrocell CoolRunner-II family and use the -7 speed grade. For an existing XC2C64A-7PCG44I board, the original device normally provides the least disruptive choice; XC2C64A-7VQG44I should be selected only after the physical package and pin assignments have been confirmed as identical.
When should I choose XC2C64A-7PCG44I over a -5 XC2C64A device?
Choose XC2C64A-7PCG44I when the design must meet the faster -7 timing class, particularly for synchronous control logic, bus arbitration, or interfaces with short clock periods. The -5 devices in the XC2C64A family represent a lower speed class, which can provide slower maximum operating performance. The exact timing margin must be checked in DS311 against external setup, hold, propagation-delay, and clock requirements rather than relying only on the grade designation.
Is XC2C64A-7PCG44I suitable for low-power portable equipment?
The XC2C64A-7PCG44I is suitable for low-power portable equipment when its 64 macrocells are sufficient for the required control and interface functions. The CoolRunner-II family combines advanced CMOS implementation with intelligent power-management features, allowing lower activity power when the configured logic is not being used. Actual system power depends on the selected I/O standards, switching activity, clocking, and the number of active I/O paths, so those conditions must be included in the final power budget.
What I/O voltages does XC2C64A-7PCG44I support?
The XC2C64A-7PCG44I supports LVCMOS operation in 3.3 V, 2.5 V, and 1.8 V applications. It can also accommodate 1.5 V signals through the use of Schmitt-trigger inputs. Each interface still requires correct supply, termination, signal-level, timing, and drive-strength configuration. Use the electrical-characteristics tables and pin descriptions in DS311 to determine whether every connected signal meets the corresponding input threshold and output-level limits.
Where can I buy XC2C64A-7PCG44I and check its current lead time?
Use the Request a Quote form on this page to request the current XC2C64A-7PCG44I price, stock position, minimum order quantity, and production lead time. Because this is a legacy programmable-logic product, availability and lifecycle allocation can change independently of its technical characteristics. Include your required quantity, target packaging, date code preference, and PCB quantity so the supplier can quote the correct exact MPN rather than a related package or speed-grade variant.
Is XC2C64A-7PCG44I in stock?
Current stock should be confirmed through the Request a Quote form on this page by entering the exact MPN XC2C64A-7PCG44I. No reliable current inventory quantity is published in the manufacturer material used for this page. For a legacy CPLD, request both new surplus and factory allocation, and specify whether obsolete, pull, or date-code constraints are acceptable. Treat an unconfirmed quotation as subject to allocation and change at the time of order.
What is the price of XC2C64A-7PCG44I?
The current XC2C64A-7PCG44I commercial terms are available through the Request a Quote form on this page. A legacy CPLD price can depend on new-surplus quantity, packaging, date code, traceability requirements, and allocation, so the buyer should submit the exact MPN and required commercial terms. The quote request should state the production quantity, acceptable date codes, and whether a no-lead or RoHS-compliant assembly is required.
What programming tool is required for XC2C64A-7PCG44I?
The XC2C64A-7PCG44I requires a programmer and configuration flow compatible with the CoolRunner-II CPLD architecture. The device's JTAG configuration interface and supported cable or platform must be checked in DS311 and the relevant device-programming documentation. Designers should also preserve the configuration bitstream and pin-assignment constraints from the original project so the replacement or direct programming process does not change board-level behavior.
How do I verify that a replacement CPLD is pin-compatible with XC2C64A-7PCG44I?
Pin compatibility must be verified using four documents: the original AMD pin table, the replacement device pin table, the package outline drawing, and the PCB footprint or assembly drawing. Compare every numbered pin for power, ground, configuration, clock, user I/O, and no-connect assignments, then check body dimensions, lead pitch, and thermal-pad requirements. A shared VQFP designation alone does not prove that two suffixes have identical electrical or mechanical details.

بيانات مرجعية هندسية لـ XC2C64A-7PCG44I — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose XC2C64A-7PCG44I for an existing 44-pin VQFP design that specifically requires 64 macrocells, the -7 speed grade, and an industrial-grade ordering configuration. XC2C64A-7VQG44I is a practical same-family candidate when its package dimensions, pin table, temperature requirements, and footprint are confirmed equivalent. XC2C64A-7PCG44C may be preferable when the original industrial temperature requirement is not applicable, although the C suffix changes the environmental position. XC2C64A-5PCG44I preserves the PCG44 package and industrial suffix but changes the speed class from -7 to -5, so it should be selected only after worst-case timing analysis confirms adequate margin. XC2C64A-5VQG44C combines the lower speed class with a commercial suffix and is suitable only where both changes are acceptable. No cross-brand alternatives were included because pin, configuration, timing, and software compatibility could not be established from the cited cross-reference results.

المقارنة مع البدائل

المعامل هذا المنتج XC2C64A-7VQG44I XC2C64A-7VQG44C XC2C64A-5VQG44C XC2C64A-7PCG44C XC2C64A-5PCG44I
Device Type CoolRunner-II CPLD CoolRunner-II CPLD CoolRunner-II CPLD CoolRunner-II CPLD CoolRunner-II CPLD CoolRunner-II CPLD
Logic Capacity 64 macrocells 64 macrocells 64 macrocells 64 macrocells 64 macrocells 64 macrocells
Speed Grade -7 -7 -7 -5 -7 -5
Package VQFP-44 VQFP-44 VQFP-44 VQFP-44 VQFP-44 VQFP-44
Brand Xilinx Xilinx Xilinx Xilinx Xilinx Xilinx
Temperature Suffix I (industrial) I (industrial) C (commercial) C (commercial) C (commercial) I (industrial)

أبرز الفروقات

  • Preserves the target's high-performance speed class (مقابلXC2C64A-5VQG44C)
  • Maintains industrial temperature positioning (مقابلXC2C64A-7VQG44C)
  • Matches the target PCG44 package code (مقابلXC2C64A-7VQG44I)

ملاحظات التصميم

Route the XC2C64A-7PCG44I against the exact PCG44 package drawing and pin table in DS311 rather than against a generic 44-pin VQFP footprint. Verify body dimensions, lead pitch, pin-1 orientation, power pins, configuration pins, and any exposed thermal features. Place required bypass capacitors close to their associated supply pins and keep the configuration interface away from noisy switching nodes. Every candidate replacement must pass this same mechanical and pin-function comparison.

Do not treat PCG44, VQG44, I, and C as interchangeable without decoding and checking each ordering suffix. The target is a 44-pin VQFP device with an industrial suffix, while candidate replacements can differ in package code or temperature grade. A -5 replacement is also approximately 28.6% slower by grade designation than -7. Compare the manufacturer's timing, environmental, and package tables and perform board-level validation before approving any alternate device.

Use the DS311 operating-current and power-management characteristics to build the power budget for active and inactive states. Account for core current, I/O drive current, and the dynamic effect of switching signals; the logic-cell count alone does not determine consumption. Keep I/O levels compatible with the selected LVCMOS voltage and use Schmitt-trigger inputs where required for the 1.5 V application mentioned in the device documentation.

Use the maximum timing data, not nominal values, when constraining clock, setup, hold, and output-delay requirements. Add series damping or source-synchronous routing techniques when a connected interface requires controlled edge rates, and maintain a continuous ground reference beneath high-speed routes. The CPLD's predictable interconnect is beneficial, but package effects, load capacitance, and board return paths still determine signal integrity at the pin.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The cited component pages and datasheet snippets do not provide definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Compliance must be confirmed for the exact ordering code and assembly.

تم التحقق من البيانات في: 2026-11-16 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

xc2c64a 7pcg44i xc2c64a datasheet xc2c64a 7vqg44i xc2c64a 7vqg44c xc2c64a 5vqg44c xc2c64a 7qfg48c xc2c64a 7cpg56c xc2c64a 7qfg48i xc2c64a 7cpg56i xc2c64a 7vqg100c XC2C64A-7PCG44I datasheet pdf XC2C64A-7PCG44I pinout XC2C64A-7PCG44I replacement XC2C64A-7PCG44I equivalent XC2C64A-7PCG44I price

المكونات والمصطلحات ذات الصلة

Xilinx AMD XC2C64A-7PCG44I XC2C64A-7VQG44I XC2C64A-7VQG44C XC2C64A-5VQG44C XC2C64A-7PCG44C XC2C64A-5PCG44I CoolRunner-II complex programmable logic device CPLD FPGA macrocell programmable logic nonvolatile configuration storage VQFP-44 surface-mount package advanced CMOS LVCMOS Schmitt-trigger input intelligent power management industrial-grade logic industrial control communications interface DS311
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر