XC2C64A-7PCG44I - 64-Macrocell 7ns CPLD | Xilinx
N.º de pieza: XC2C64A-7PCG44I ✗ Fin de vidaXC2C64A-7PCG44I Descripción general
A complex programmable logic device is a programmable semiconductor that combines a structured logic architecture with nonvolatile configuration storage. In the programmable-logic hierarchy, a CPLD sits between simple fixed-function logic and an FPGA: it offers macrocell-based logic implementation, predictable interconnect delays, and retained configuration in a compact package. The XC2C64A belongs to the CoolRunner-II family, designed for both high-performance and low-power portable equipment.
The device provides 64 macrocells and approximately 1,500 usable gates, with 33 user I/O pins available in the PCG44 package. The -7 suffix identifies the higher-performance speed grade. Its I/O architecture supports LVCMOS operation in 3.3 V, 2.5 V, and 1.8 V systems, while 1.5 V compatibility can be achieved by using Schmitt-trigger inputs. Intelligent power management helps reduce consumption when the device is inactive.
CoolRunner-II architecture uses configurable logic blocks and dedicated interconnect resources, making routing behavior more predictable than in a general-purpose FPGA. This characteristic is useful for control logic, bus arbitration, state machines, address decoding, and peripheral glue where a modest logic capacity is sufficient but deterministic implementation remains important. The PCG44 package also supports compact board layouts where a larger FPGA would be unnecessary.
Typical applications include industrial controller logic, low-power handheld equipment, communications interfaces, test and measurement systems, and embedded control subsystems. The 33 user I/O count makes the device suitable for parallel buses, status and control registers, clock distribution, and programmable signal conditioning when external fixed-function logic would otherwise consume more board area.
PCB design should follow the package dimensions, exposed-pad or thermal requirements, and recommended decoupling shown in the AMD datasheet. Confirm pin assignments, voltage domains, and supported I/O standards in the pin-description table before routing. Programming must use a compatible CoolRunner-II device programmer and the appropriate design file.
This page combines the XC2C64A-7PCG44I family architecture, package details, verified replacement relationships, and practical selection guidance. It also highlights the distinctions between speed grades and temperature suffixes so engineers can identify a pin-compatible replacement without overlooking device-level qualification requirements.
Alternativas directas para XC2C64A-7PCG44I — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con XC2C64A-7PCG44I (mismo factor de forma y huella) — difiere en Process Technology, Configuration Memory, Package, Device Type, Logic Architecture.
XC2C64A-7VQG44I
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XC2C64A-7VQG44C
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XC2C64A-5VQG44C
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XC2C64A-7PCG44C
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →XC2C64A-5PCG44I
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
XC2C64A-7PCG44I Valores máximos y características eléctricas
| Device Type | CoolRunner-II complex programmable logic device (CPLD) |
| Logic Capacity | 64 macrocells |
| Usable Gates | 1,500 gates |
| User I/O Pins | 33 pins |
| Speed Grade | -7 |
| Encapsulado | 44-pin VQFP |
| Process Technology | Advanced CMOS |
| Power Management | Intelligent power management |
| 3.3 V I/O Standard | LVCMOS |
| 2.5 V I/O Standard | LVCMOS |
| 1.8 V I/O Standard | LVCMOS |
| 1.5 V Input Compatibility | Schmitt-trigger inputs |
| Temperature Grade | Industrial grade |
| Configuration Memory | Nonvolatile configuration storage |
| Logic Architecture | Macrocell-based CoolRunner-II architecture |
| Tipo de montaje | Surface mount |
Guía de configuración de pines de XC2C64A-7PCG44I 44-pin vqfp
Configuración de pines para XC2C64A-7PCG44I (encapsulado 44-pin vqfp). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para XC2C64A-7PCG44I.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
XC2C64A-7PCG44I es adecuado para 6 aplicacións: Industrial Controller Logic, Low-Power Portable Equipment, Communications Interface Conditioning, Test and Measurement Control, Embedded System Glue Logic, Audio and Video Interface Support.
Industrial Controller Logic
The XC2C64A-7PCG44I fits compact industrial control blocks that require deterministic programmable logic without the resource level of an FPGA. Its 64 macrocells and approximately 1,500 usable gates can implement state machines, interlocks, alarm logic, and supervisory sequencing, while the -7 speed grade supports tighter timing margins. The industrial-grade designation is relevant to equipment operating beyond consumer-temperature conditions. Intelligent power management also helps when only part of the logic is active, although final dissipation depends on clocking, I/O activity, voltage, and the implemented design.
Recomendado
Low-Power Portable Equipment
The XC2C64A-7PCG44I is appropriate for portable products that need a small, reconfigurable control engine with 64 macrocells and 33 user I/O pins. It can consolidate power sequencing, button handling, display control, status logic, and low-speed peripheral interfacing into one nonvolatile CPLD. Intelligent power-management features support reduced activity power, while the 44-pin VQFP limits board footprint. For battery-powered equipment, designers should still evaluate energy consumption across active and standby states, because I/O toggling and clock distribution can dominate the programmable-logic contribution.
Recomendado
Communications Interface Conditioning
The XC2C64A-7PCG44I can implement protocol framing, command decoding, bus arbitration, and interface isolation around communications peripherals. Its 33 user I/O pins provide enough parallel connectivity for control signals, while the -7 grade favors designs with demanding combinational or registered timing. LVCMOS support at 3.3 V, 2.5 V, and 1.8 V permits use with multiple generations of mixed-signal interface components. The design must still honor voltage compatibility, setup and hold requirements, termination, and configuration constraints for every connected bus.
Recomendado
Test and Measurement Control
In test and measurement equipment, the XC2C64A-7PCG44I can implement sequencing, trigger conditioning, front-panel control, and glue logic between sensors and a processor. The 64-macrocell limit makes it appropriate for modular instrument control rather than high-channel-count signal processing. The -7 speed class provides additional timing margin for clocked state machines and parallel capture logic. Engineers should use the timing tables to establish setup, hold, clock, and output-delay margins, and should review I/O drive and termination for every instrument signal path.
Recomendado
Embedded System Glue Logic
The XC2C64A-7PCG44I is useful when a microcontroller or processor requires deterministic companion logic for address decoding, arbitration, interrupt routing, or peripheral sequencing. Sixty-four macrocells and 33 user I/O pins provide a practical capacity limit for those functions while preserving a compact 44-pin VQFP footprint. Nonvolatile configuration permits the logic pattern to remain available after power loss, and the -7 grade can improve timing margin over a -5 device. Final selection should account for worst-case propagation delays and system clock requirements from the manufacturer timing tables.
Recomendado
Audio and Video Interface Support
The XC2C64A-7PCG44I can support audio or video systems with control-path logic, channel routing, synchronization, and status monitoring. Its macrocell capacity is better suited to control and interface adaptation than complete media processing, while the 33 available user I/O pins can support several parallel data or control lines. The -7 grade benefits clocked routing and registered interfaces. Signal integrity remains application-dependent: impedance, trace length, grounding, and output timing must be evaluated for each bus, particularly when the device interfaces with converters or higher-speed digital components.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para XC2C64A-7PCG44I — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | XC2C64A-7VQG44I | XC2C64A-7VQG44C | XC2C64A-5VQG44C | XC2C64A-7PCG44C | XC2C64A-5PCG44I |
|---|---|---|---|---|---|---|
| Device Type | CoolRunner-II CPLD | CoolRunner-II CPLD | CoolRunner-II CPLD | CoolRunner-II CPLD | CoolRunner-II CPLD | CoolRunner-II CPLD |
| Logic Capacity | 64 macrocells | 64 macrocells | 64 macrocells | 64 macrocells | 64 macrocells | 64 macrocells |
| Speed Grade | -7 | -7 | -7 | -5 | -7 | -5 |
| Package | VQFP-44 | VQFP-44 | VQFP-44 | VQFP-44 | VQFP-44 | VQFP-44 |
| Brand | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx |
| Temperature Suffix | I (industrial) | I (industrial) | C (commercial) | C (commercial) | C (commercial) | I (industrial) |
Diferenciadores clave
- Preserves the target's high-performance speed class (frente a XC2C64A-5VQG44C)
- Maintains industrial temperature positioning (frente a XC2C64A-7VQG44C)
- Matches the target PCG44 package code (frente a XC2C64A-7VQG44I)
Notas de diseño
Route the XC2C64A-7PCG44I against the exact PCG44 package drawing and pin table in DS311 rather than against a generic 44-pin VQFP footprint. Verify body dimensions, lead pitch, pin-1 orientation, power pins, configuration pins, and any exposed thermal features. Place required bypass capacitors close to their associated supply pins and keep the configuration interface away from noisy switching nodes. Every candidate replacement must pass this same mechanical and pin-function comparison.
Do not treat PCG44, VQG44, I, and C as interchangeable without decoding and checking each ordering suffix. The target is a 44-pin VQFP device with an industrial suffix, while candidate replacements can differ in package code or temperature grade. A -5 replacement is also approximately 28.6% slower by grade designation than -7. Compare the manufacturer's timing, environmental, and package tables and perform board-level validation before approving any alternate device.
Use the DS311 operating-current and power-management characteristics to build the power budget for active and inactive states. Account for core current, I/O drive current, and the dynamic effect of switching signals; the logic-cell count alone does not determine consumption. Keep I/O levels compatible with the selected LVCMOS voltage and use Schmitt-trigger inputs where required for the 1.5 V application mentioned in the device documentation.
Use the maximum timing data, not nominal values, when constraining clock, setup, hold, and output-delay requirements. Add series damping or source-synchronous routing techniques when a connected interface requires controlled edge rates, and maintain a continuous ground reference beneath high-speed routes. The CPLD's predictable interconnect is beneficial, but package effects, load capacitance, and board return paths still determine signal integrity at the pin.
Información de cumplimiento
The cited component pages and datasheet snippets do not provide definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Compliance must be confirmed for the exact ordering code and assembly.