XC7A200T-L1FB676I Artix-7 215K FPGA | AMD
MPN: XC7A200T-L1FB676I ✓ نشطXC7A200T-L1FB676I نظرة عامة
An FPGA is a semiconductor whose digital functionality is configured after manufacture. A field-programmable gate array belongs to the programmable-logic hierarchy, above simple programmable logic devices and below adaptive computing systems. Artix-7 devices use configurable logic blocks and routing resources to implement processors, control logic, data pipelines, interfaces, and signal-processing functions. This combination makes the XC7A200T-L1FB676I suitable when software-like design flexibility must coexist with deterministic hardware performance.
Principal features include 215,360 logic cells and 33,650 adaptive logic modules, providing substantial parallel-processing capacity. The device also includes 740 DSP48E1 slices, 13,140 Kb of block RAM, 400 I/O, and eight GTP channels in the associated FBG676 configuration. These resources support DSP filtering, transform engines, high-speed capture, serial links, embedded processors, and multi-interface control systems. Four MMCM blocks and four PLL blocks support clock generation and phase alignment.
The FBG676 package uses a 27 mm by 27 mm footprint and a 0.8 mm ball pitch. Because a device of this density includes many power rails, high-speed transceiver supplies, and hundreds of user I/O, PCB design must provide separate decoupling, solid power distribution, and controlled routing for high-speed differential signals. Although the package is pin-compatible across compatible speed grades, replacing a device requires checking the complete ordering code, supported temperature range, voltage limits, and the specific Artix-7 device map.
Typical uses include industrial control, test and measurement, high-speed data acquisition, video and image processing, communications infrastructure, and embedded systems requiring parallel logic plus dedicated DSP resources. The 400-I/O configuration is useful for multi-channel acquisition systems, while the GTP transceivers support high-speed serial connectivity. The XC7A200T-L1FB676I is also suitable for prototyping complete RTL systems before scaling to larger adaptive-computing platforms.
Design the power rails, decoupling network, clocking, and transceiver interfaces according to the manufacturer datasheet and package pinout files. Treat the BGA layout as a high-density PCB-design task: controlled escape routing, via arrays, layer-stack planning, and assembly-process checks can determine whether the design assembles reliably. Validate speed-grade-specific timing before treating a nominally pin-compatible device as an equivalent production replacement.
This page combines exact device identity, verified resource and package information, same-footprint alternatives, application guidance, and design cautions to support component selection before a PCB design begins.
بدائل مباشرة لـ XC7A200T-L1FB676I — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع XC7A200T-L1FB676I (نفس عامل الشكل والبصمة) — يختلف في Package, Device Type, Logic Cells, Process Technology, Speed Grade.
XC7A200T-1FBG676I
✅ بديل مباشر✗ غير متوفر
$390 / وحدة
عرض ورقة البيانات ←XC7A200T-2FBG676I
✅ بديل مباشر✗ غير متوفر
$100 / وحدة
عرض ورقة البيانات ←XC7A200T-1FB676I
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←XC7A200T-2FB676I
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←XC7A200T-L2FBG676E
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
XC7A200T-L1FB676I الحدود القصوى والخصائص الكهربائية
| Device Type | Artix-7 FPGA |
| Logic Cells | 215,360 cells |
| Adaptive Logic Modules | 33,650 ALMs |
| Block RAM | 13,140 Kb |
| DSP48E1 Slices | 740 slices |
| User I/O | 400 I/O |
| GTP Transceiver Channels | 8 channels |
| MMCM Blocks | 4 blocks |
| PLL Blocks | 4 blocks |
| العلبة | 676-ball FCBGA |
| Package Body Size | 27 mm x 27 mm |
| Ball Pitch | 0.8 mm |
| Process Technology | 28 nm |
| Speed Grade | -1 |
| Temperature Class | Industrial |
دليل تكوين أطراف XC7A200T-L1FB676I 27 mm x 27 mm
تكوين الأطراف لـ XC7A200T-L1FB676I (حزمة 27 mm x 27 mm). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ XC7A200T-L1FB676I.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
XC7A200T-L1FB676I مناسب لـ 6 التطبيقs: High-Speed Data Acquisition, Industrial Control and Automation, Digital Signal Processing, Video and Image Processing, Communications and Protocol Bridging, Embedded Systems and Rapid Prototyping.
High-Speed Data Acquisition
The XC7A200T-L1FB676I fits parallel data-acquisition systems that combine many input channels with real-time processing. Its 400 user I/O can connect converters, sensors, and synchronization logic, while 740 DSP48E1 slices can perform filtering, decimation, correlation, and numerical conversions. The 13,140 Kb of block RAM provides capture and buffering capacity, and eight GTP channels support high-speed transfer of acquired samples. In implementation, engineers should establish deterministic clocking with the four MMCM and four PLL resources, constrain timing for the selected -1 speed class, and keep high-speed inputs away from switching and power-supply return paths. Because the FCBGA contains hundreds of balls, controlled escape routing, via-in-pad or via-array decisions, and independent rail decoupling determine whether signal integrity and thermal performance remain stable.
موصى به
Industrial Control and Automation
The XC7A200T-L1FB676I is suitable for industrial controllers requiring deterministic parallel I/O, local memory, and programmable signal processing. Its 215,360 logic cells can host control state machines, communication protocols, diagnostics, and safety supervisory logic, while 400 I/O support encoder inputs, actuator outputs, and field-bus transceivers. The four MMCM and four PLL blocks provide flexible clock generation for multiple machine-control domains. For a factory controller, low-latency GTP channels can connect to high-speed data links while DSP slices perform filtering or condition monitoring. Design work should include timing margins across the industrial temperature range, isolation boundaries, robust power sequencing, and brownout behavior. The BGA escape pattern must also account for assembly capability and inspection, because fine-pitch routing constraints can materially affect manufacturability even when the FPGA resources are more than adequate.
موصى به
Digital Signal Processing
The XC7A200T-L1FB676I provides substantial parallel signal-processing capacity through 740 DSP48E1 slices, 215,360 logic cells, and 13,140 Kb of block RAM. These resources suit FIR and IIR filtering, correlation, waveform generation, digital downconversion, fixed-point transforms, and multichannel processing without requiring an external DSP for every operation. Engineers can connect samples to the DSP pipeline through the 400 I/O, use block RAM for coefficient storage and buffering, and use MMCM resources to align clocks across parallel lanes. Practical implementation should account for DSP slice counts before architecture commitment and use pipelining to meet clock-period targets. For analog inputs, separate converter placement from FPGA escape routes and maintain return paths for clock and data signals. Transceiver-based channels can extend the system when eight GTP links are sufficient for the required physical layer and protocol.
موصى به
Video and Image Processing
The XC7A200T-L1FB676I can implement pixel pipelines, color conversion, object detection preprocessing, and multi-camera data handling within a single Artix-7 device. Its 740 DSP48E1 slices accelerate multiply-accumulate operations used in filters and fixed-point arithmetic, while 13,140 Kb of block RAM supports line buffers, lookup tables, and multi-frame staging. The 400 I/O provide parallel connections to image sensors, frame grabbers, and display processing. Eight GTP channels can support compressed-video links or high-speed interfaces where protocol support permits. A practical design should use separate clock domains for pixel capture, processing, and transmission, then constrain each path according to the selected -1 timing class. Video routing must preserve return continuity, and power rails for external interface devices should not share noisy return paths with sensitive FPGA inputs. Timing closure is particularly important when frame-rate requirements limit available pipeline latency.
موصى به
Communications and Protocol Bridging
The XC7A200T-L1FB676I is appropriate for communications equipment that must bridge parallel logic, memory-like data paths, and high-speed serial links. Eight GTP transceivers provide dedicated serial resources, while 215,360 logic cells can implement protocol state machines, packetization, buffering, error handling, and supervisory logic. The four PLL and four MMCM blocks can create or align clocks needed by parallel fabric and serial interfaces. For an industrial or telecommunications design, the device can consolidate several interfaces while the 400 I/O handle control signals and legacy parallel traffic. Engineers must follow the AMD transceiver layout guidance for differential routing, reference-clock connections, power sequencing, and impedance control. A replacement that fits the same FCBGA outline should still be checked against the Artix-7 device map because configuration pins and power identities are not interchangeable across FPGA families.
موصى به
Embedded Systems and Rapid Prototyping
The XC7A200T-L1FB676I supports large embedded prototypes that combine a soft processor, custom accelerators, memory interfaces, and multiple peripherals on one programmable device. The 215,360 logic cells and 13,140 Kb of block RAM can host a MicroBlaze processor alongside substantial custom RTL, while 740 DSP48E1 slices accelerate arithmetic workloads that would otherwise burden the processor. The 400 I/O simplify access to external memory, test points, and development peripherals. For rapid prototyping, engineers should use the device pinout files to build the board around the exact FBG676 power and configuration requirements, then reserve programming and debug access. Because the target is a -L1 speed variant, timing constraints should reflect the intended operating class rather than a faster grade. Final production transfers should include a timing report and pinout comparison to prevent prototype-only assumptions from carrying into a released design.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ XC7A200T-L1FB676I — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | XC7A200T-1FBG676I | XC7A200T-2FBG676I | XC7A200T-1FB676I | XC7A200T-2FB676I | XC7A200T-L2FBG676E |
|---|---|---|---|---|---|---|
| Package | 676-ball FCBGA | 676-ball FCBGA | 676-ball FCBGA | 676-ball FCBGA | 676-ball FCBGA | 676-ball FCBGA |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Series | Artix-7 XC7A200T | Artix-7 XC7A200T | Artix-7 XC7A200T | Artix-7 XC7A200T | Artix-7 XC7A200T | Artix-7 XC7A200T |
| Logic Cells | 215,360 cells | 215,360 cells | 215,360 cells | 215,360 cells | 215,360 cells | 215,360 cells |
| Adaptive Logic Modules | 33,650 ALMs | 33,650 ALMs | 33,650 ALMs | 33,650 ALMs | 33,650 ALMs | 33,650 ALMs |
| Block RAM | 13,140 Kb | 13,140 Kb | 13,140 Kb | 13,140 Kb | 13,140 Kb | 13,140 Kb |
| DSP48E1 Slices | 740 slices | 740 slices | 740 slices | 740 slices | 740 slices | 740 slices |
| User I/O | 400 I/O | 400 I/O | 400 I/O | 400 I/O | 400 I/O | 400 I/O |
| GTP Transceiver Channels | 8 channels | 8 channels | 8 channels | 8 channels | 8 channels | 8 channels |
| Speed Grade | -1 | -1 | -2 | -1 | -2 | -2 |
أبرز الفروقات
- Combines 740 DSP48E1 slices with 215,360 logic cells in one Artix-7 device (مقابلXC7A200T-1FBG676I)
- Provides 400 user I/O for parallel acquisition and control (مقابلXC7A200T-2FBG676I)
- Integrates eight GTP channels for high-speed serial connectivity (مقابلXC7A200T-1FB676I)
ملاحظات التصميم
Create a separate distribution path for every voltage rail identified in the package pinout files. Place the required bypass capacitors at the nearest accessible power and ground balls, use dense via arrays where the BGA escape permits, and keep high-current transceiver and core-supply returns quiet. Confirm rail sequencing, maximum ramp rates, and startup behavior against the family data sheet. A 676-ball device may appear electrically straightforward, but small placement errors can create shared-impedance noise across hundreds of simultaneously switching I/O.
Plan the FCBGA escape before committing the board stack-up. Maintain continuous ground references beneath the device, avoid splits under BGA rows, and route high-speed differential pairs as length-matched pairs with the manufacturer-specified impedance. GTP reference-clock and transceiver routing must follow the AMD layout guidance, including via symmetry and controlled return paths. Perform signal-integrity and power-integrity simulations after finalizing layer transitions, connector locations, and external memory interfaces.
Do not assume that equal ball counts make FPGAs from different families interchangeable. A valid replacement must preserve the Artix-7 device map, power rails, configuration behavior, I/O standards, memory interfaces, and timing class. For the listed XC7A200T candidates, compare the full ordering code rather than only the speed digit. After substitution, rerun synthesis or implementation, timing analysis, pin constraints, and bitstream generation to catch differences that a package drawing cannot reveal.
معلومات الامتثال
No explicit compliance declarations for this exact ordering code were identified. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status with AMD for the current production lot.