SiTime timing families target 224G Ethernet and PCIe 7 clock design-ins

SiTime's FemtoClock 4 and VersaClock 8 target higher-density Ethernet switches and thermally constrained PCIe 7 server trays, with availability listed for current design-ins.

Published Updated 4 min read ✓ AI-ready Share

TL;DR — three sentences

  • FemtoClock 4 targets 224G SerDes switches with up to 18 outputs across six frequency domains. (S1)
  • VersaClock 8 targets PCIe 7 systems and reports about 10-fs reference-clock jitter and operation up to 105°C. (S1)
  • Seven listed SiTime MPNs were described as available, including RC38616 and RC31312A. (S1)

Taken from key_takeaways (real field, max 3 entries). Fact and analysis are labelled separately.

SiTime timing families target 224G Ethernet and PCIe 7 clock design-insEditorial cover for a component sourcing brief. Chip motif; headline "SiTime timing families target 224G Ethernet and PCIe 7 clock design-ins". No reported key numbers on this brief, so no number strip is drawn. 1 cited source. Static cover (no animation).SiTime timing families target 224GEthernet and PCIe 7 clock design-insXAIPART
Cover image generated from data already shown on this page: the category motif, the headline, and reported key numbers. No decorative illustration; no third-party image.

You arrived from an AI answer — this is the verifiable original

An AI summary may have dropped the basis for its claims. The original forecast, the affected parts and every citation are on this page, each traceable to its source.

XAIPART forecast

This brief carries a falsifiable forecast.

Affected parts

No catalog match for this story — nothing is shown rather than inferring a match.

Reported by EDN on . Summarized and analyzed by XAIPART Editorial.

What happened

SiTime released the FemtoClock 4 and VersaClock 8 timing-device families for data-center systems using next-generation Ethernet and PCIe designs.S1 FemtoClock 4 targets top-of-rack and spine switches built around 224G SerDes, while VersaClock 8 targets PCIe interconnectivity in thermally constrained, high-density server trays.S1

FemtoClock 4 operates as a jitter attenuator and clock generator, with 19-fsRMS phase jitter at 312.5 MHz in generator mode using a 12 kHz to 20 MHz band and a 4-MHz high-pass filter.S1 The family provides up to six frequency domains across 18 outputs; EDN said this output count could reduce the clock-device count in top-of-rack switches that typically require more than 40 clocks.S1

VersaClock 8 provides programmable reference clocks for CPUs, xPUs, memory and storage.S1 EDN reports about 10-fs reference-clock jitter for PCIe 7, 30-fsRMS phase jitter at 312.5 MHz under the same stated filter conditions, operation up to 105°C, and 5-, 9- and 12-output versions in QFN packages from 4×4 mm to 6×6 mm.S1 The 12-output version is about 40% smaller than a comparable solution, according to SiTime.S1

The listed FemtoClock 4 devices are RC38616, RC38412, RC32418 and RC32412, while the VersaClock 8 devices are RC31312A, RC31309A and RC31305A.S1 All seven devices were described as available at the time of the report.S1

Key numbers
MetricReported valueSource
FemtoClock 4 phase jitter19-fsRMS at 312.5 MHzS1
FemtoClock 4 outputs and frequency domainsUp to 18 outputs across six frequency domainsS1
VersaClock 8 reference-clock jitterAbout 10 fs for PCIe 7S1
VersaClock 8 phase jitter30-fsRMS at 312.5 MHzS1
VersaClock 8 maximum operating temperature105°CS1
VersaClock 8 12-output size comparisonAbout 40% smaller than a comparable solution, according to SiTimeS1
Typical top-of-rack switch clock requirementMore than 40 clocksS1

Background timeline

  1. - EDN reported that SiTime's FemtoClock 4 and VersaClock 8 families were available for next-generation Ethernet and PCIe applications.S1

Supply-chain ripple

  1. FemtoClock 4 offers up to 18 outputs across six frequency domains, while VersaClock 8 includes up to 12 outputs in packages as small as 4×4 mm.S1
  2. Higher output density can reduce the number of separate clock components required in a switch or server design, but it also concentrates qualification and sourcing risk in fewer timing-device positions.XAIPART analysis
  3. Procurement teams evaluating FemtoClock 4 and VersaClock 8 should compare the total qualified-part count and thermal qualification burden against the board-area savings.XAIPART analysis

XAIPART take

Technical impact

XAIPART analysis: The 224G SerDes focus makes FemtoClock 4 relevant to systems where clock-count reduction matters, because the family can cover up to six frequency domains across 18 outputs.S1 For server trays, VersaClock 8's stated 105°C operation and 4×4 mm minimum package address placement and heat-management constraints, although the reported 10-fs PCIe 7 figure still requires comparison against each platform's clocking budget.S1

XAIPART analysis: Consolidating clocks can simplify a design's component count, but it can also make one family a more consequential single-source dependency.S1 The relevant engineering decision is therefore not output count alone, but the number of alternate qualified parts available for each clock function.

Market impact

XAIPART analysis: EDN's reference to top-of-rack switches typically needing more than 40 clocks points to a potential board-space and sourcing benefit from higher-density timing devices.S1 The same consolidation can increase exposure if a device becomes unavailable or if its validation consumes additional schedule.S1

XAIPART analysis: The source does not disclose pricing, lead times, production volumes or a second-source roadmap for any listed MPN.S1 Buyers should therefore treat the families as design-in candidates rather than assume immediate commercial flexibility.

Action

XAIPART analysis: Request jitter, phase-noise, temperature and package data for the exact RC38616, RC32418, RC31312A or other listed MPN, then map each device to the platform's clock outputs.S1 If supplier lead times for the selected family exceed the qualification window, qualify a compatible alternate before the next BOM review.S1

XAIPART analysis: Use the stated 19-fsRMS FemtoClock 4 and 30-fsRMS VersaClock 8 phase-jitter figures as initial engineering reference points, not as substitutes for platform-level validation.S1

XAIPART Forecast

XAIPART analysis: XAIPART expects SiTime FemtoClock 4 and VersaClock 8 to enter qualification on at least one 224G Ethernet or PCIe 7 data-center platform by Q4 2027 if published lead times remain below 12 weeks; the forecast is wrong if neither family appears in a publicly disclosed platform qualification before that deadline.XAIPART analysis

XAIPART analysis: The 12-week threshold is an XAIPART expectation rather than a source-reported figure, so it should be revised when purchasing data becomes available.S1

Facts are as reported by the cited sources. The design-in, sourcing and forward-looking statements above are XAIPART's analysis, not the sources' claims. Lead times, pricing and independent qualification evidence are single-source or not disclosed, so the commercial implications remain uncertain.

Corrections: none at publication. This brief will be updated with a timestamp if the source corrects its report.

Alternatives and lifecycle

Alternatives on file — catalog scope, not a market ranking
PartRelationLifecycleBasis
— No alternative on file NEEDS DATA — Requires match_type before any predecessor label may appear

“Predecessor” and “alternative” labels come only from a recorded match type, a lifecycle status, or the source text. Where no match is recorded, no label is shown. Our own listings are not a market reference.

What to watch

Falsifiable forecast — threshold, window and current status. Disproved forecasts stay visible.
ClaimThresholdByStatus
: XAIPART expects SiTime FemtoClock 4 and VersaClock 8 to enter qualification on at least one 224G Ethernet or PCIe 7 data-center platform by Q4 2027 if published lead times remain below 12 weeks; the forecast is wron... neither family appears Q4 2027 Pending

Forecasts that turn out wrong are kept visible and marked. We do not delete them.

Affected parts

No catalog match. This story does not map to any part currently listed on XAIPART. We do not infer matches, and we do not show a placeholder list.

Cost pressure by dimension

Source: FRED · Generated · reference output z and composite are algorithm outputs, not a fetch snapshot

Cost pressure by dimension — composite stateDiverging bars for three dimensions around a zero midpoint. Input Cost has no reading; Supply Demand z 0.0276, neutral; Fx Energy z -0.0087, neutral. Composite index 0.1, band neutral.0Input costno readingSupply/demandz +0.0276 · neutral48 dFX & energyz −0.0087 · neutral5 dcomposite +0.1 · neutral−100 · −40 · −15 · 0 · +15 · +40 · +100
Underlying values — copyable for verification.
DimensionFRED series IDUnitLagAs of
Input costPCOPPUSDM, PALUMUSDM, PNICKUSDMUSD/mt52 d
Supply/demandPCU334413334413, IPG3344Sindex(1982=100) / index(2017=100)48 d
FX & energyDEXCHUS, DCOILBRENTEU, DHHNGSPrate / USD/bbl / USD/MMBtu5 d

No free authoritative interface for: gold · silver · rare earth · polysilicon · lithium carbonate · market share — listed rather than approximated.

How this was produced

Process evidence — fetch, source sanity, model and gate
Audit trail for this brief
Source fetched EDN · www.edn.com · 3,168 chars · fetch status success
Source sanity (S1) ok — passed before any model call (no s1_ block recorded)
Model / prompt MiniMax-M3.1-Flash · prompt Blog Agent - News Summary (v3.0.2-news) · 10,869 tokens · 75.9s · run completed
Gate verdict pass · 6/6 applicable checks passed · spec v2.9 · C10 ratio 0.062937 · C10 rounds 0
Time contract 2 <time datetime> values in this brief — 0 violations (+08:00 or date-only)

Every row above is produced by the pipeline, not written by hand.

Editorial score

Deterministic gate result — pure PHP, no model involvement in the verdict
Gate score breakdown 6 applicable checks, 6 passed: 100 percent. No hold items or mandatory failures. Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.7471. Applicable checks passed 6 / 6 = 100% · verdict: pass No hold items or mandatory failures Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.7471 The gate decides publication. The independent audit score is advisory only.
Found an error? Tell us what is wrong — corrections are published alongside the original text and logged. We do not silently edit articles.

Comments

Be the first to comment.

Sources

  1. Timing devices serve next-gen Ethernet and PCIe — https://www.edn.com/timing-devices-serve-next-gen-ethernet-and-pcie/ · rss · accessed

Facts are marked S1/S2 and trace to the linked source. Passages labelled analysis are XAIPART's own reasoning, kept separate from reported facts. Source links are followed rather than nofollow — attribution is intentional.