Reported by EDN on . Summarized and analyzed by XAIPART Editorial.
What happened
SiTime released the FemtoClock 4 and VersaClock 8 timing-device families for data-center systems using next-generation Ethernet and PCIe designs.S1 FemtoClock 4 targets top-of-rack and spine switches built around 224G SerDes, while VersaClock 8 targets PCIe interconnectivity in thermally constrained, high-density server trays.S1
FemtoClock 4 operates as a jitter attenuator and clock generator, with 19-fsRMS phase jitter at 312.5 MHz in generator mode using a 12 kHz to 20 MHz band and a 4-MHz high-pass filter.S1 The family provides up to six frequency domains across 18 outputs; EDN said this output count could reduce the clock-device count in top-of-rack switches that typically require more than 40 clocks.S1
VersaClock 8 provides programmable reference clocks for CPUs, xPUs, memory and storage.S1 EDN reports about 10-fs reference-clock jitter for PCIe 7, 30-fsRMS phase jitter at 312.5 MHz under the same stated filter conditions, operation up to 105°C, and 5-, 9- and 12-output versions in QFN packages from 4×4 mm to 6×6 mm.S1 The 12-output version is about 40% smaller than a comparable solution, according to SiTime.S1
The listed FemtoClock 4 devices are RC38616, RC38412, RC32418 and RC32412, while the VersaClock 8 devices are RC31312A, RC31309A and RC31305A.S1 All seven devices were described as available at the time of the report.S1
| Metric | Reported value | Source |
|---|---|---|
| FemtoClock 4 phase jitter | 19-fsRMS at 312.5 MHz | S1 |
| FemtoClock 4 outputs and frequency domains | Up to 18 outputs across six frequency domains | S1 |
| VersaClock 8 reference-clock jitter | About 10 fs for PCIe 7 | S1 |
| VersaClock 8 phase jitter | 30-fsRMS at 312.5 MHz | S1 |
| VersaClock 8 maximum operating temperature | 105°C | S1 |
| VersaClock 8 12-output size comparison | About 40% smaller than a comparable solution, according to SiTime | S1 |
| Typical top-of-rack switch clock requirement | More than 40 clocks | S1 |
Background timeline
- - EDN reported that SiTime's FemtoClock 4 and VersaClock 8 families were available for next-generation Ethernet and PCIe applications.S1
Supply-chain ripple
- FemtoClock 4 offers up to 18 outputs across six frequency domains, while VersaClock 8 includes up to 12 outputs in packages as small as 4×4 mm.S1
- Higher output density can reduce the number of separate clock components required in a switch or server design, but it also concentrates qualification and sourcing risk in fewer timing-device positions.XAIPART analysis
- Procurement teams evaluating FemtoClock 4 and VersaClock 8 should compare the total qualified-part count and thermal qualification burden against the board-area savings.XAIPART analysis
XAIPART take
Technical impact
XAIPART analysis: The 224G SerDes focus makes FemtoClock 4 relevant to systems where clock-count reduction matters, because the family can cover up to six frequency domains across 18 outputs.S1 For server trays, VersaClock 8's stated 105°C operation and 4×4 mm minimum package address placement and heat-management constraints, although the reported 10-fs PCIe 7 figure still requires comparison against each platform's clocking budget.S1
XAIPART analysis: Consolidating clocks can simplify a design's component count, but it can also make one family a more consequential single-source dependency.S1 The relevant engineering decision is therefore not output count alone, but the number of alternate qualified parts available for each clock function.
Market impact
XAIPART analysis: EDN's reference to top-of-rack switches typically needing more than 40 clocks points to a potential board-space and sourcing benefit from higher-density timing devices.S1 The same consolidation can increase exposure if a device becomes unavailable or if its validation consumes additional schedule.S1
XAIPART analysis: The source does not disclose pricing, lead times, production volumes or a second-source roadmap for any listed MPN.S1 Buyers should therefore treat the families as design-in candidates rather than assume immediate commercial flexibility.
Action
XAIPART analysis: Request jitter, phase-noise, temperature and package data for the exact RC38616, RC32418, RC31312A or other listed MPN, then map each device to the platform's clock outputs.S1 If supplier lead times for the selected family exceed the qualification window, qualify a compatible alternate before the next BOM review.S1
XAIPART analysis: Use the stated 19-fsRMS FemtoClock 4 and 30-fsRMS VersaClock 8 phase-jitter figures as initial engineering reference points, not as substitutes for platform-level validation.S1
XAIPART Forecast
XAIPART analysis: XAIPART expects SiTime FemtoClock 4 and VersaClock 8 to enter qualification on at least one 224G Ethernet or PCIe 7 data-center platform by Q4 2027 if published lead times remain below 12 weeks; the forecast is wrong if neither family appears in a publicly disclosed platform qualification before that deadline.XAIPART analysis
XAIPART analysis: The 12-week threshold is an XAIPART expectation rather than a source-reported figure, so it should be revised when purchasing data becomes available.S1
Facts are as reported by the cited sources. The design-in, sourcing and forward-looking statements above are XAIPART's analysis, not the sources' claims. Lead times, pricing and independent qualification evidence are single-source or not disclosed, so the commercial implications remain uncertain.
Corrections: none at publication. This brief will be updated with a timestamp if the source corrects its report.
代替品とライフサイクル
| 部品 | 関係 | ライフサイクル | 根拠 |
|---|---|---|---|
| — | 登録済みの代替品はありません データ不足 | — | 前身ラベルを表示するには match_type が必要です |
「前身」および「代替」のラベルは、記録された一致タイプ、ライフサイクルステータス、またはソーステキストに基づく場合にのみ付与されます。一致が記録されていない場合、ラベルは表示されません。当社の掲載情報は市場の基準ではありません。
注視すべき点
| 主張 | しきい値 | 著者: | ステータス |
|---|---|---|---|
| : XAIPART expects SiTime FemtoClock 4 and VersaClock 8 to enter qualification on at least one 224G Ethernet or PCIe 7 data-center platform by Q4 2027 if published lead times remain below 12 weeks; the forecast is wron... | neither family appears | Q4 2027 | Pending |
誤りだった予測は表示されたままマークされます。削除することはありません。
影響を受ける部品
カタログに一致するものはありません。 この記事は、現在XAIPARTに掲載されているどの部品にも該当しません。一致を推測することはなく、プレースホルダーのリストも表示しません。
次元別のコスト圧力
| Dimension | FRED series ID | Unit | Lag | As of |
|---|---|---|---|---|
| Input cost | PCOPPUSDM, PALUMUSDM, PNICKUSDM | USD/mt | 52 d | |
| Supply/demand | PCU334413334413, IPG3344S | index(1982=100) / index(2017=100) | 48 d | |
| FX & energy | DEXCHUS, DCOILBRENTEU, DHHNGSP | rate / USD/bbl / USD/MMBtu | 5 d |
No free authoritative interface for: gold · silver · rare earth · polysilicon · lithium carbonate · market share — listed rather than approximated.
この記事の制作方法
プロセス証跡 — 取得、ソースの妥当性、モデル、ゲート
| Source fetched | EDN · www.edn.com · 3,168 chars · fetch status success |
|---|---|
| Source sanity (S1) | ok — passed before any model call (no s1_ block recorded) |
| Model / prompt | MiniMax-M3.1-Flash · prompt Blog Agent - News Summary (v3.0.2-news) · 10,869 tokens · 75.9s · run completed |
| Gate | verdict pass · 6/6 applicable checks passed · spec v2.9 · C10 ratio 0.062937 · C10 rounds 0 |
| Time contract | 2 <time datetime> values in this brief — 0 violations (+08:00 or date-only) |
上記のすべての行はパイプラインによって生成されており、手作業で書かれたものではありません。
コメント
最初のコメントを投稿しましょう。
🔐 コメントするには ログイン してください。
アカウントをお持ちでないですか? 新規登録