SiTime timing families target 224G Ethernet and PCIe 7 clock design-ins

SiTime's FemtoClock 4 and VersaClock 8 target higher-density Ethernet switches and thermally constrained PCIe 7 server trays, with availability listed for current design-ins.

Diterbitkan Dikemaskini 4 min bacaan ✓ Siap AI Bagikan

TL;DR — tiga ayat

  • FemtoClock 4 targets 224G SerDes switches with up to 18 outputs across six frequency domains. (S1)
  • VersaClock 8 targets PCIe 7 systems and reports about 10-fs reference-clock jitter and operation up to 105°C. (S1)
  • Seven listed SiTime MPNs were described as available, including RC38616 and RC31312A. (S1)

Diambil dari key_takeaways (medan sebenar, maksimum 3 entri). Fakt dan analisis dikelaskan secara terpisah.

SiTime timing families target 224G Ethernet and PCIe 7 clock design-insEditorial cover for a component sourcing brief. Chip motif; headline "SiTime timing families target 224G Ethernet and PCIe 7 clock design-ins". No reported key numbers on this brief, so no number strip is drawn. 1 cited source. Static cover (no animation).SiTime timing families target 224GEthernet and PCIe 7 clock design-insXAIPART
Cover image generated from data already shown on this page: the category motif, the headline, and reported key numbers. No decorative illustration; no third-party image.

Anda tiba dari jawapan AI ini adalah asal yang boleh disahkan

Ringkasan AI mungkin telah kehilangan dasar untuk klaimnya. Ramalan asal, bahagian yang terpengaruh dan setiap kutipan terdapat di halaman ini, setiap dapat ditrace ke sumbernya.

Ramalan XAIPART

Ringkasan ini membawa ramalan yang boleh dipertikaikan.

Bahagian yang terpengaruh

Tiada sebarang sepadan katalog untuk cerita ini — tiada apa yang ditunjukkan untuk menduga sepadan

Reported by EDN on . Summarized and analyzed by XAIPART Editorial.

What happened

SiTime released the FemtoClock 4 and VersaClock 8 timing-device families for data-center systems using next-generation Ethernet and PCIe designs.S1 FemtoClock 4 targets top-of-rack and spine switches built around 224G SerDes, while VersaClock 8 targets PCIe interconnectivity in thermally constrained, high-density server trays.S1

FemtoClock 4 operates as a jitter attenuator and clock generator, with 19-fsRMS phase jitter at 312.5 MHz in generator mode using a 12 kHz to 20 MHz band and a 4-MHz high-pass filter.S1 The family provides up to six frequency domains across 18 outputs; EDN said this output count could reduce the clock-device count in top-of-rack switches that typically require more than 40 clocks.S1

VersaClock 8 provides programmable reference clocks for CPUs, xPUs, memory and storage.S1 EDN reports about 10-fs reference-clock jitter for PCIe 7, 30-fsRMS phase jitter at 312.5 MHz under the same stated filter conditions, operation up to 105°C, and 5-, 9- and 12-output versions in QFN packages from 4×4 mm to 6×6 mm.S1 The 12-output version is about 40% smaller than a comparable solution, according to SiTime.S1

The listed FemtoClock 4 devices are RC38616, RC38412, RC32418 and RC32412, while the VersaClock 8 devices are RC31312A, RC31309A and RC31305A.S1 All seven devices were described as available at the time of the report.S1

Key numbers
MetricReported valueSource
FemtoClock 4 phase jitter19-fsRMS at 312.5 MHzS1
FemtoClock 4 outputs and frequency domainsUp to 18 outputs across six frequency domainsS1
VersaClock 8 reference-clock jitterAbout 10 fs for PCIe 7S1
VersaClock 8 phase jitter30-fsRMS at 312.5 MHzS1
VersaClock 8 maximum operating temperature105°CS1
VersaClock 8 12-output size comparisonAbout 40% smaller than a comparable solution, according to SiTimeS1
Typical top-of-rack switch clock requirementMore than 40 clocksS1

Background timeline

  1. - EDN reported that SiTime's FemtoClock 4 and VersaClock 8 families were available for next-generation Ethernet and PCIe applications.S1

Supply-chain ripple

  1. FemtoClock 4 offers up to 18 outputs across six frequency domains, while VersaClock 8 includes up to 12 outputs in packages as small as 4×4 mm.S1
  2. Higher output density can reduce the number of separate clock components required in a switch or server design, but it also concentrates qualification and sourcing risk in fewer timing-device positions.XAIPART analysis
  3. Procurement teams evaluating FemtoClock 4 and VersaClock 8 should compare the total qualified-part count and thermal qualification burden against the board-area savings.XAIPART analysis

XAIPART take

Technical impact

XAIPART analysis: The 224G SerDes focus makes FemtoClock 4 relevant to systems where clock-count reduction matters, because the family can cover up to six frequency domains across 18 outputs.S1 For server trays, VersaClock 8's stated 105°C operation and 4×4 mm minimum package address placement and heat-management constraints, although the reported 10-fs PCIe 7 figure still requires comparison against each platform's clocking budget.S1

XAIPART analysis: Consolidating clocks can simplify a design's component count, but it can also make one family a more consequential single-source dependency.S1 The relevant engineering decision is therefore not output count alone, but the number of alternate qualified parts available for each clock function.

Market impact

XAIPART analysis: EDN's reference to top-of-rack switches typically needing more than 40 clocks points to a potential board-space and sourcing benefit from higher-density timing devices.S1 The same consolidation can increase exposure if a device becomes unavailable or if its validation consumes additional schedule.S1

XAIPART analysis: The source does not disclose pricing, lead times, production volumes or a second-source roadmap for any listed MPN.S1 Buyers should therefore treat the families as design-in candidates rather than assume immediate commercial flexibility.

Action

XAIPART analysis: Request jitter, phase-noise, temperature and package data for the exact RC38616, RC32418, RC31312A or other listed MPN, then map each device to the platform's clock outputs.S1 If supplier lead times for the selected family exceed the qualification window, qualify a compatible alternate before the next BOM review.S1

XAIPART analysis: Use the stated 19-fsRMS FemtoClock 4 and 30-fsRMS VersaClock 8 phase-jitter figures as initial engineering reference points, not as substitutes for platform-level validation.S1

XAIPART Forecast

XAIPART analysis: XAIPART expects SiTime FemtoClock 4 and VersaClock 8 to enter qualification on at least one 224G Ethernet or PCIe 7 data-center platform by Q4 2027 if published lead times remain below 12 weeks; the forecast is wrong if neither family appears in a publicly disclosed platform qualification before that deadline.XAIPART analysis

XAIPART analysis: The 12-week threshold is an XAIPART expectation rather than a source-reported figure, so it should be revised when purchasing data becomes available.S1

Facts are as reported by the cited sources. The design-in, sourcing and forward-looking statements above are XAIPART's analysis, not the sources' claims. Lead times, pricing and independent qualification evidence are single-source or not disclosed, so the commercial implications remain uncertain.

Corrections: none at publication. This brief will be updated with a timestamp if the source corrects its report.

Pilihan dan siklus hidup

Pilihan di fail — tingkat katalog, bukan peringkat pasaran
BahagianHubunganLifespanDasar
— Tiada alternatif di fail PERLU DATA — Memerlukan match_type sebelum setiap label sebelumnya mungkin muncul

“Penyelia” dan “alternatif” label hanya datang dari tipe penggabungan yang dicatat, status lifespan, atau teks sumber. Kalau tiada penggabungan yang dicatat, tiada label yang ditunjukkan. Daftar sendiri kami bukan rujukan pasar.

Apa yang harus dipantau

Ramalan yang boleh disahkan — pengesanan, tingkatan dan status semasa. Ramalan yang dituduh terus dapat dilihat.
KlaimAmbangDariStatus Biasa
: XAIPART expects SiTime FemtoClock 4 and VersaClock 8 to enter qualification on at least one 224G Ethernet or PCIe 7 data-center platform by Q4 2027 if published lead times remain below 12 weeks; the forecast is wron... neither family appears Q4 2027 Pending

Ramalan yang ternyata salah terus dapat dilihat dan disignaskan. Kami tidak menghapuskannya.

Bahagian yang terpengaruh

Tiada sebarang sepadan katalog. Cerita ini tidak dapat dipertukarkan dengan mana-mana bahagian yang sedang disiarkan di XAIPART. Kami tidak membuat kesimpulan, dan kami tidak menunjukkan senarai placeholder.

Tekanan kos berdasarkan dimensi

Source: FRED · Generated · reference output z and composite are algorithm outputs, not a fetch snapshot

Cost pressure by dimension — composite stateDiverging bars for three dimensions around a zero midpoint. Input Cost has no reading; Supply Demand z 0.0276, neutral; Fx Energy z -0.0087, neutral. Composite index 0.1, band neutral.0Input costno readingSupply/demandz +0.0276 · neutral48 dFX & energyz −0.0087 · neutral5 dcomposite +0.1 · neutral−100 · −40 · −15 · 0 · +15 · +40 · +100
Underlying values — copyable for verification.
DimensionFRED series IDUnitLagAs of
Input costPCOPPUSDM, PALUMUSDM, PNICKUSDMUSD/mt52 d
Supply/demandPCU334413334413, IPG3344Sindex(1982=100) / index(2017=100)48 d
FX & energyDEXCHUS, DCOILBRENTEU, DHHNGSPrate / USD/bbl / USD/MMBtu5 d

No free authoritative interface for: gold · silver · rare earth · polysilicon · lithium carbonate · market share — listed rather than approximated.

Bagaimana ini dihasilkan

Proses bukti — mengambil, sumber kekalahan, model dan gate
Jejak pemindaian untuk laporan ini
Source fetched EDN · www.edn.com · 3,168 chars · fetch status success
Source sanity (S1) ok — passed before any model call (no s1_ block recorded)
Model / prompt MiniMax-M3.1-Flash · prompt Blog Agent - News Summary (v3.0.2-news) · 10,869 tokens · 75.9s · run completed
Gate verdict pass · 6/6 applicable checks passed · spec v2.9 · C10 ratio 0.062937 · C10 rounds 0
Time contract 2 <time datetime> values in this brief — 0 violations (+08:00 or date-only)

Tiada baris di atas dihasilkan oleh alur bukannya ditulis dengan tangan.

Skor redaksi

Hasil pintu deterministik — PHP penuh, tanpa campur tangan model dalam keputusan
Kaedah penukaran skor 6 pemeriksaan yang berlaku, 6passed: 100 Peratus. No hold items or mandatory failures. Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.7471. Pemeriksaan yang berlaku lulus 6 / 6 = 100% · kesimpulan: pass No hold items or mandatory failures Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.7471 Gerbang menentukan penerbitan. Skor audit yang bebas hanya untuk peringatan.
Terdapat kesalahan? Beritahu kami apa yang salah — perbaikan diterbitkan bersama teks asal dan disiarkan. Kami tidak mengedit artikel secara diam-diam.

Komen

Jadi orang pertama untuk memberi komen.

Sumber

  1. Timing devices serve next-gen Ethernet and PCIe — https://www.edn.com/timing-devices-serve-next-gen-ethernet-and-pcie/ · rss · diakses

Fakt disignaskan S1/S2 dan dapat dijejak ke sumber yang terhubung. Pemotongan yang berlabel analisis adalah pemikiran sendiri XAIPART, dijaga berasingan dari fakta yang dilaporkan. Pautan sumber diikuti daripada nofollow — pengakuan adalah sengaja.