SiTime timing families target 224G Ethernet and PCIe 7 clock design-ins

SiTime's FemtoClock 4 and VersaClock 8 target higher-density Ethernet switches and thermally constrained PCIe 7 server trays, with availability listed for current design-ins.

게시됨 업데이트됨 4 분 소요 ✓ AI 대응 공유

TL;DR — 세 문장

  • FemtoClock 4 targets 224G SerDes switches with up to 18 outputs across six frequency domains. (S1)
  • VersaClock 8 targets PCIe 7 systems and reports about 10-fs reference-clock jitter and operation up to 105°C. (S1)
  • Seven listed SiTime MPNs were described as available, including RC38616 and RC31312A. (S1)

출처: key_takeaways (실제 필드, 최대 3개 항목). 사실과 분석은 별도로 표시됩니다.

SiTime timing families target 224G Ethernet and PCIe 7 clock design-insEditorial cover for a component sourcing brief. Chip motif; headline "SiTime timing families target 224G Ethernet and PCIe 7 clock design-ins". No reported key numbers on this brief, so no number strip is drawn. 1 cited source. Static cover (no animation).SiTime timing families target 224GEthernet and PCIe 7 clock design-insXAIPART
Cover image generated from data already shown on this page: the category motif, the headline, and reported key numbers. No decorative illustration; no third-party image.

AI 답변을 통해 오셨습니다 — 이것은 검증 가능한 원문입니다

AI 요약은 주장의 근거를 누락했을 수 있습니다. 원래 예측, 영향받는 부품 및 모든 인용은 이 페이지에 있으며 각각 출처로 추적할 수 있습니다.

XAIPART 예측

이 브리프에는 반증 가능한 예측이 포함되어 있습니다.

영향받는 부품

이 기사에 대한 카탈로그 일치가 없습니다 — 일치를 추론하지 않고 아무것도 표시하지 않습니다.

Reported by EDN on . Summarized and analyzed by XAIPART Editorial.

What happened

SiTime released the FemtoClock 4 and VersaClock 8 timing-device families for data-center systems using next-generation Ethernet and PCIe designs.S1 FemtoClock 4 targets top-of-rack and spine switches built around 224G SerDes, while VersaClock 8 targets PCIe interconnectivity in thermally constrained, high-density server trays.S1

FemtoClock 4 operates as a jitter attenuator and clock generator, with 19-fsRMS phase jitter at 312.5 MHz in generator mode using a 12 kHz to 20 MHz band and a 4-MHz high-pass filter.S1 The family provides up to six frequency domains across 18 outputs; EDN said this output count could reduce the clock-device count in top-of-rack switches that typically require more than 40 clocks.S1

VersaClock 8 provides programmable reference clocks for CPUs, xPUs, memory and storage.S1 EDN reports about 10-fs reference-clock jitter for PCIe 7, 30-fsRMS phase jitter at 312.5 MHz under the same stated filter conditions, operation up to 105°C, and 5-, 9- and 12-output versions in QFN packages from 4×4 mm to 6×6 mm.S1 The 12-output version is about 40% smaller than a comparable solution, according to SiTime.S1

The listed FemtoClock 4 devices are RC38616, RC38412, RC32418 and RC32412, while the VersaClock 8 devices are RC31312A, RC31309A and RC31305A.S1 All seven devices were described as available at the time of the report.S1

Key numbers
MetricReported valueSource
FemtoClock 4 phase jitter19-fsRMS at 312.5 MHzS1
FemtoClock 4 outputs and frequency domainsUp to 18 outputs across six frequency domainsS1
VersaClock 8 reference-clock jitterAbout 10 fs for PCIe 7S1
VersaClock 8 phase jitter30-fsRMS at 312.5 MHzS1
VersaClock 8 maximum operating temperature105°CS1
VersaClock 8 12-output size comparisonAbout 40% smaller than a comparable solution, according to SiTimeS1
Typical top-of-rack switch clock requirementMore than 40 clocksS1

Background timeline

  1. - EDN reported that SiTime's FemtoClock 4 and VersaClock 8 families were available for next-generation Ethernet and PCIe applications.S1

Supply-chain ripple

  1. FemtoClock 4 offers up to 18 outputs across six frequency domains, while VersaClock 8 includes up to 12 outputs in packages as small as 4×4 mm.S1
  2. Higher output density can reduce the number of separate clock components required in a switch or server design, but it also concentrates qualification and sourcing risk in fewer timing-device positions.XAIPART analysis
  3. Procurement teams evaluating FemtoClock 4 and VersaClock 8 should compare the total qualified-part count and thermal qualification burden against the board-area savings.XAIPART analysis

XAIPART take

Technical impact

XAIPART analysis: The 224G SerDes focus makes FemtoClock 4 relevant to systems where clock-count reduction matters, because the family can cover up to six frequency domains across 18 outputs.S1 For server trays, VersaClock 8's stated 105°C operation and 4×4 mm minimum package address placement and heat-management constraints, although the reported 10-fs PCIe 7 figure still requires comparison against each platform's clocking budget.S1

XAIPART analysis: Consolidating clocks can simplify a design's component count, but it can also make one family a more consequential single-source dependency.S1 The relevant engineering decision is therefore not output count alone, but the number of alternate qualified parts available for each clock function.

Market impact

XAIPART analysis: EDN's reference to top-of-rack switches typically needing more than 40 clocks points to a potential board-space and sourcing benefit from higher-density timing devices.S1 The same consolidation can increase exposure if a device becomes unavailable or if its validation consumes additional schedule.S1

XAIPART analysis: The source does not disclose pricing, lead times, production volumes or a second-source roadmap for any listed MPN.S1 Buyers should therefore treat the families as design-in candidates rather than assume immediate commercial flexibility.

Action

XAIPART analysis: Request jitter, phase-noise, temperature and package data for the exact RC38616, RC32418, RC31312A or other listed MPN, then map each device to the platform's clock outputs.S1 If supplier lead times for the selected family exceed the qualification window, qualify a compatible alternate before the next BOM review.S1

XAIPART analysis: Use the stated 19-fsRMS FemtoClock 4 and 30-fsRMS VersaClock 8 phase-jitter figures as initial engineering reference points, not as substitutes for platform-level validation.S1

XAIPART Forecast

XAIPART analysis: XAIPART expects SiTime FemtoClock 4 and VersaClock 8 to enter qualification on at least one 224G Ethernet or PCIe 7 data-center platform by Q4 2027 if published lead times remain below 12 weeks; the forecast is wrong if neither family appears in a publicly disclosed platform qualification before that deadline.XAIPART analysis

XAIPART analysis: The 12-week threshold is an XAIPART expectation rather than a source-reported figure, so it should be revised when purchasing data becomes available.S1

Facts are as reported by the cited sources. The design-in, sourcing and forward-looking statements above are XAIPART's analysis, not the sources' claims. Lead times, pricing and independent qualification evidence are single-source or not disclosed, so the commercial implications remain uncertain.

Corrections: none at publication. This brief will be updated with a timestamp if the source corrects its report.

대체품 및 수명 주기

등록된 대체품 — 카탈로그 범위이며 시장 순위가 아닙니다
부품관계수명 주기근거
— 등록된 대체품 없음 데이터 필요 — 요구 사항 match_type 어떤 전임자 라벨이 표시되기 전에

"전임자" 및 "대체품" 라벨은 기록된 일치 유형, 수명 주기 상태 또는 출처 텍스트에서만 부여됩니다. 일치가 기록되지 않은 경우 라벨이 표시되지 않습니다. 당사 자체 등록 상품은 시장 기준이 아닙니다.

주시할 사항

반증 가능한 예측 — 임계값, 기간 및 현재 상태. 반증된 예측도 계속 표시됩니다.
주장임계값작성:상태
: XAIPART expects SiTime FemtoClock 4 and VersaClock 8 to enter qualification on at least one 224G Ethernet or PCIe 7 data-center platform by Q4 2027 if published lead times remain below 12 weeks; the forecast is wron... neither family appears Q4 2027 Pending

잘못된 예측도 계속 표시하고 표시를 남깁니다. 삭제하지 않습니다.

영향받는 부품

카탈로그 일치 없음. 이 보도는 현재 XAIPART에 등록된 어떤 부품과도 매핑되지 않습니다. 일치를 추론하지 않으며 자리 표시자 목록도 표시하지 않습니다.

차원별 비용 압력

Source: FRED · Generated · reference output z and composite are algorithm outputs, not a fetch snapshot

Cost pressure by dimension — composite stateDiverging bars for three dimensions around a zero midpoint. Input Cost has no reading; Supply Demand z 0.0276, neutral; Fx Energy z -0.0087, neutral. Composite index 0.1, band neutral.0Input costno readingSupply/demandz +0.0276 · neutral48 dFX & energyz −0.0087 · neutral5 dcomposite +0.1 · neutral−100 · −40 · −15 · 0 · +15 · +40 · +100
Underlying values — copyable for verification.
DimensionFRED series IDUnitLagAs of
Input costPCOPPUSDM, PALUMUSDM, PNICKUSDMUSD/mt52 d
Supply/demandPCU334413334413, IPG3344Sindex(1982=100) / index(2017=100)48 d
FX & energyDEXCHUS, DCOILBRENTEU, DHHNGSPrate / USD/bbl / USD/MMBtu5 d

No free authoritative interface for: gold · silver · rare earth · polysilicon · lithium carbonate · market share — listed rather than approximated.

이 콘텐츠의 제작 방식

프로세스 증거 — 수집, 출처 온전성, 모델 및 게이트
이 브리프의 감사 추적
Source fetched EDN · www.edn.com · 3,168 chars · fetch status success
Source sanity (S1) ok — passed before any model call (no s1_ block recorded)
Model / prompt MiniMax-M3.1-Flash · prompt Blog Agent - News Summary (v3.0.2-news) · 10,869 tokens · 75.9s · run completed
Gate verdict pass · 6/6 applicable checks passed · spec v2.9 · C10 ratio 0.062937 · C10 rounds 0
Time contract 2 <time datetime> values in this brief — 0 violations (+08:00 or date-only)

위의 모든 행은 파이프라인에서 생성되며 수작업으로 작성되지 않습니다.

편집 점수

결정론적 게이트 결과 — 순수 PHP로 판정에 모델이 관여하지 않음
게이트 점수 분석 6 적용 가능한 검사, 6항목 통과: 100 %. No hold items or mandatory failures. Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.7471. 적용 가능한 검사 통과 6 / 6 = 100% · 판정: pass No hold items or mandatory failures Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.7471 게시 여부는 게이트가 결정합니다. 독립 감사 점수는 권고용일 뿐입니다.
오류를 발견하셨습니까? 잘못된 점을 알려 주십시오 — 정정 사항은 원문과 함께 게시되고 기록됩니다. 기사를 조용히 수정하지 않습니다.

댓글

첫 번째 댓글을 남겨 보십시오.

출처

  1. Timing devices serve next-gen Ethernet and PCIe — https://www.edn.com/timing-devices-serve-next-gen-ethernet-and-pcie/ · rss · 조회일

사실은 S1/S2로 표시되며 링크된 출처로 추적됩니다. 다음 라벨이 붙은 구절은 분석 는 보도된 사실과 분리되어 유지되는 XAIPART의 자체 추론입니다. 출처 링크는 추정하지 않고 실제로 확인합니다. nofollow — 출처 표기는 의도적입니다.