LM2903D vs LM293DG তুলনা
. বিস্তৃত সাথে-সাথে তুলনা LM2903D নির্দিষ্ট Texas Instruments ও LM293DG নির্দিষ্ট onsemi. প্রধান বিশেষত্ব, বৈদ্যুতিক প্রাকৃতিক, প্যাকেজিং, জীবনচক্র অবস্থা, মূল্যাঙ্কন, ও পরিসীমা কোন অপশনটির কেন্দ্রীয় নির্ধারণ করুন
বিশিষ্টতা তুলনা
| পারামিটার | LM2903D | LM293DG |
|---|---|---|
| ব্র্যান্ড | Texas Instruments | onsemi |
| ক্যাটাগরি | Amplifier ICs | Amplifier ICs |
| লাইফসাইকেল স্ট্যাটাস | সক্রিয় | সক্রিয় |
| Comparator Type | Dual differential comparator | Precision, dual, independent |
| Number of Channels | 2 channels | — |
| Supply Voltage Range | 2 V to 36 V | 2 V to 36 V |
| আউটপুট টাইপ | Open-collector | Open-collector / open-drain |
| Response Time | 300 ns | 1.3 microseconds |
| প্যাকেজ | 8-pin SOIC | 8-SOIC (SOIC-8), 1.27 mm lead pitch |
| মাউন্টিং টাইপ | Surface mount | Surface Mount |
| অপারেটিং তাপমাত্রার পরিসর | -40 °C to +125 °C | -25 C to +85 C |
| Supply Configuration | Single supply or split supply | — |
| Channel Independence | Two independent comparator channels | Fully independent channels |
| Output Logic Style | Open-collector, pull-up resistor required | — |
| Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | as low as 2.0 mV |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Output Sink Current | [DATA_NEEDED: output sink current] | [DATA_NEEDED: output sink current rating] |
| কুইসেন্ট কারেন্ট | [DATA_NEEDED: supply current per channel] | — |
| Propagation Delay | 300 ns response time | — |
| Output High Voltage | [DATA_NEEDED: output high-level voltage with pull-up] | — |
| RoHS স্ট্যাটাস | [DATA_NEEDED: RoHS status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Number of Comparators | — | 2 |
| সাপ্লাই কারেন্ট | — | 400 microamps |
| Output Compatibility | — | CMOS, MOS, TTL, DTL, ECL |
| Common-Mode Input Range | — | Includes ground (single supply operation) |
| Input Common-Mode Range | — | Ground to (V+) - 1.5 V (typical single-supply behaviour) |
| Input Differential Voltage Range | — | [DATA_NEEDED: input differential voltage range] |
| Lead-Free / RoHS Status | — | [DATA_NEEDED: lead-free and RoHS status] |