LM2903D vs LM293DG तुलना
विस्तृत दोनों ओर की तुलना LM2903D द्वारा Texas Instruments और LM293DG द्वारा onsemi. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | LM2903D | LM293DG |
|---|---|---|
| ब्रांड | Texas Instruments | onsemi |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Comparator Type | Dual differential comparator | Precision, dual, independent |
| Number of Channels | 2 channels | — |
| Supply Voltage Range | 2 V to 36 V | 2 V to 36 V |
| आउटपुट प्रकार | Open-collector | Open-collector / open-drain |
| Response Time | 300 ns | 1.3 microseconds |
| पैकेज | 8-pin SOIC | 8-SOIC (SOIC-8), 1.27 mm lead pitch |
| माउंटिंग प्रकार | Surface mount | Surface Mount |
| ऑपरेटिंग तापमान रेंज | -40 °C to +125 °C | -25 C to +85 C |
| Supply Configuration | Single supply or split supply | — |
| Channel Independence | Two independent comparator channels | Fully independent channels |
| Output Logic Style | Open-collector, pull-up resistor required | — |
| Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | as low as 2.0 mV |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Output Sink Current | [DATA_NEEDED: output sink current] | [DATA_NEEDED: output sink current rating] |
| क्वाइसेंट करंट | [DATA_NEEDED: supply current per channel] | — |
| Propagation Delay | 300 ns response time | — |
| Output High Voltage | [DATA_NEEDED: output high-level voltage with pull-up] | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Number of Comparators | — | 2 |
| सप्लाई करंट | — | 400 microamps |
| Output Compatibility | — | CMOS, MOS, TTL, DTL, ECL |
| Common-Mode Input Range | — | Includes ground (single supply operation) |
| Input Common-Mode Range | — | Ground to (V+) - 1.5 V (typical single-supply behaviour) |
| Input Differential Voltage Range | — | [DATA_NEEDED: input differential voltage range] |
| Lead-Free / RoHS Status | — | [DATA_NEEDED: lead-free and RoHS status] |