LM2903D vs LM293DG Karşılaştırma
Ayrıntılı yan yana karşılaştırma LM2903D tarafından Texas Instruments ve LM293DG tarafından onsemiAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | LM2903D | LM293DG |
|---|---|---|
| Marka | Texas Instruments | onsemi |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Comparator Type | Dual differential comparator | Precision, dual, independent |
| Number of Channels | 2 channels | — |
| Supply Voltage Range | 2 V to 36 V | 2 V to 36 V |
| Çıkış Türü | Open-collector | Open-collector / open-drain |
| Response Time | 300 ns | 1.3 microseconds |
| Paket | 8-pin SOIC | 8-SOIC (SOIC-8), 1.27 mm lead pitch |
| Montaj Türü | Surface mount | Surface Mount |
| İşletim Sıcaklığı Aralığı | -40 °C to +125 °C | -25 C to +85 C |
| Supply Configuration | Single supply or split supply | — |
| Channel Independence | Two independent comparator channels | Fully independent channels |
| Output Logic Style | Open-collector, pull-up resistor required | — |
| Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | as low as 2.0 mV |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Output Sink Current | [DATA_NEEDED: output sink current] | [DATA_NEEDED: output sink current rating] |
| Durağan Akım | [DATA_NEEDED: supply current per channel] | — |
| Propagation Delay | 300 ns response time | — |
| Output High Voltage | [DATA_NEEDED: output high-level voltage with pull-up] | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Number of Comparators | — | 2 |
| Besleme Akımı | — | 400 microamps |
| Output Compatibility | — | CMOS, MOS, TTL, DTL, ECL |
| Common-Mode Input Range | — | Includes ground (single supply operation) |
| Input Common-Mode Range | — | Ground to (V+) - 1.5 V (typical single-supply behaviour) |
| Input Differential Voltage Range | — | [DATA_NEEDED: input differential voltage range] |
| Lead-Free / RoHS Status | — | [DATA_NEEDED: lead-free and RoHS status] |