LM2903D vs LM293DG موازنہ
تفصیلی ساتھ ساتھ موازنہ از LM2903D بذریعہ Texas Instruments اور LM293DG بذریعہ onsemi. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
خصوصیات کا موازنہ
| پیرامیٹر | LM2903D | LM293DG |
|---|---|---|
| برانڈ | Texas Instruments | onsemi |
| زمرہ | Amplifier ICs | Amplifier ICs |
| لائف سائیکل کی حالت | فعال | فعال |
| Comparator Type | Dual differential comparator | Precision, dual, independent |
| Number of Channels | 2 channels | — |
| Supply Voltage Range | 2 V to 36 V | 2 V to 36 V |
| آؤٹ پٹ کی قسم | Open-collector | Open-collector / open-drain |
| Response Time | 300 ns | 1.3 microseconds |
| پیکیج | 8-pin SOIC | 8-SOIC (SOIC-8), 1.27 mm lead pitch |
| ماؤنٹنگ ٹائپ | Surface mount | Surface Mount |
| آپریٹنگ درجہ حرارت رینج | -40 °C to +125 °C | -25 C to +85 C |
| Supply Configuration | Single supply or split supply | — |
| Channel Independence | Two independent comparator channels | Fully independent channels |
| Output Logic Style | Open-collector, pull-up resistor required | — |
| Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | as low as 2.0 mV |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Output Sink Current | [DATA_NEEDED: output sink current] | [DATA_NEEDED: output sink current rating] |
| کوئیسینٹ کرنٹ | [DATA_NEEDED: supply current per channel] | — |
| Propagation Delay | 300 ns response time | — |
| Output High Voltage | [DATA_NEEDED: output high-level voltage with pull-up] | — |
| RoHS اسٹیٹس | [DATA_NEEDED: RoHS status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Number of Comparators | — | 2 |
| سپلائی کرنٹ | — | 400 microamps |
| Output Compatibility | — | CMOS, MOS, TTL, DTL, ECL |
| Common-Mode Input Range | — | Includes ground (single supply operation) |
| Input Common-Mode Range | — | Ground to (V+) - 1.5 V (typical single-supply behaviour) |
| Input Differential Voltage Range | — | [DATA_NEEDED: input differential voltage range] |
| Lead-Free / RoHS Status | — | [DATA_NEEDED: lead-free and RoHS status] |