A3P125-VQ100I - 1.5K LE ProASIC3 FPGA | Microchip
MPN: A3P125-VQ100I ✓ সক্রিয়A3P125-VQ100I সারাংশ
A field-programmable gate array, or FPGA, is a programmable digital semiconductor that combines configurable logic blocks, programmable I/O, and internal configuration resources. FPGAs sit within the broader semiconductor and programmable-logic hierarchy, above individual logic gates and microcontrollers. Unlike a fixed-function application-specific integrated circuit, an FPGA allows designers to implement parallel data paths, protocol bridges, control logic, and custom interfaces by programming the device after manufacture.
The A3P125-VQ100I belongs to the ProASIC3 family, which Microchip describes as an ultra-low-density FPGA family emphasizing system performance, small-footprint packages, reprogrammability, and low total cost of ownership. Its 1.5K logic-element configuration is intended for compact glue logic rather than processor-scale systems. The listed 71 I/O provide connections to external memories, sensors, transceivers, control signals, and board-level buses.
The 36,864-bit configuration resource stores the programmed logic design in the device's nonvolatile flash technology. This architecture permits the same board design to be reused when the FPGA configuration changes. Programming support and the final bitstream format should be handled with the programming tools and device documentation specified by Microchip for the ProASIC3 family.
Typical uses include industrial control, communications interface conditioning, data acquisition, embedded protocol conversion, sensor aggregation, and low-volume programmable control. The A3P125-VQ100I is most appropriate when several parallel logic functions are required but the implementation is too small to justify a larger FPGA or a complex microprocessor design.
PCB design should preserve the manufacturer's 100-pin TQFP footprint, power and ground distribution, decoupling arrangement, configuration interface, and exposed programming connections. Because programming, system reset, and configuration behavior are tightly coupled, designers should review the pin-description table and reference design guidance in the manufacturer documentation before assigning PCB signals.
This product page organizes the verified A3P125 device identity, package information, searchable technical questions, and compatible ProASIC3 ordering variants. It also provides practical selection guidance for engineers comparing package codes and designing compact embedded systems without relying on unrelated device families as drop-in replacements.
এর জন্য ড্রপ-ইন বিকল্প A3P125-VQ100I — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible A3P125-VQ100I (একই form factor এবং footprint) — পার্থক্য রয়েছে Configuration Technology, Device Type, Logic Elements, Operating Temperature, Package.
A3P125-VQG100I
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
A3P125-VQG100
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
A3P125-VQ100T
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →A3P125-VQ100I সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Device Type | ProASIC3 field-programmable gate array |
| Logic Elements | 1.5K logic elements |
| I/O Count | 71 I/O |
| Configuration Memory | 36,864 bits |
| Programmable Logic Type | FPGA |
| Architecture | ProASIC3 |
| Configuration Technology | Flash-based |
| প্যাকেজ | 100-pin TQFP |
| মাউন্টিং টাইপ | Surface mount |
| Device Category | Ultra-low-density FPGA |
| Number of User I/O | 71 I/O |
A3P125-VQ100I 100-pin tqfp পিন কনফিগারেশন গাইড
A3P125-VQ100I (100-pin tqfp প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি A3P125-VQ100I.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
A3P125-VQ100I এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Control Logic, Communications Interface Conditioning, Data Acquisition Front End, Protocol Conversion Bridge, Sensor Aggregation Hub, Low-Volume Programmable Control.
Industrial Control Logic
The A3P125-VQ100I fits compact industrial-control logic that requires deterministic parallel operation without the overhead of a larger FPGA. Its 1.5K logic elements can host control state machines, interlocks, alarm handling, and actuator-command sequencing, while 71 I/O provide connections to sensors, relays, and machine-control signals. The flash-based ProASIC3 architecture also permits configuration revisions when product variants or field requirements change. Engineers should verify supply-voltage compatibility, operating-temperature limits, and timing behavior against the exact A3P125 ordering code before production release.
সুপারিশকৃত
Communications Interface Conditioning
The A3P125-VQ100I can serve as a small communications-interface conditioning device when parallel framing, buffering, and protocol-conversion functions fit within 1.5K logic elements. Its 71 I/O support connections among transceivers, status signals, and buffered data buses without requiring a processor for every simple protocol function. Programmable logic also permits different framing or filtering behavior across product variants. The key design checks are interface voltage compatibility, clock timing, clock-domain structure, and the I/O assignment limits defined in the manufacturer documentation.
সুপারিশকৃত
Data Acquisition Front End
The A3P125-VQ100I is appropriate for front-end data acquisition tasks that need parallel sampling control, trigger coordination, filtering, and data movement. With 1.5K logic elements, it can implement several fixed-width pipelines or state machines rather than a large processor-based architecture. The 71 available I/O can connect sample-enable signals, sensor outputs, clocks, and acquisition-status indicators. Designers should establish timing margins for the selected external devices, use the pin-description table for clock and control assignments, and verify that the target's voltage and temperature ratings match the measurement environment.
সুপারিশকৃত
Protocol Conversion Bridge
The A3P125-VQ100I can implement a compact bridge between two digital interfaces when the required conversion logic remains within the 1.5K-logic-element budget. Typical functions include byte alignment, endian conversion, register translation, and buffering between buses with different control conventions. With 71 I/O, the device can support parallel interfaces and associated handshake signals while keeping the implementation deterministic. Engineers must confirm that the external interfaces share a workable voltage range, account for setup and hold timing, and use the manufacturer pin table to avoid conflicts among clock, configuration, and user signals.
সুপারিশকৃত
Sensor Aggregation Hub
The A3P125-VQ100I suits sensor-aggregation designs that must combine several low-bandwidth inputs before transferring data to a host or communications controller. Its programmable fabric can perform threshold checks, scaling, filtering, fault flags, and update sequencing across 71 I/O, while the 1.5K logic elements support multiple small parallel channels. Flash-based programmability enables product-specific sensor maps and calibration behavior without changing the board. Designers should review whether the required number of channels, signal directions, and voltage levels fit the device and whether clocking requirements can be met within the available I/O and routing resources.
সুপারিশকৃত
Low-Volume Programmable Control
The A3P125-VQ100I is well suited to low-volume programmable products where a small control engine must support configuration options without creating a dedicated ASIC. Logic blocks can implement sequencing, timers, diagnostics, and communication routines, while 71 I/O connect the controller to displays, switches, relays, and external modules. The 36,864-bit flash configuration resource supports an embedded bitstream, and program updates can reduce the number of board variants. Commercial and industrial deployments should verify lifecycle intent, temperature grade, supply requirements, and programming-tool support for the exact ordering suffix.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা A3P125-VQ100I — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | A3P125-VQG100I | A3P125-VQG100 | A3P125-VQ100 |
|---|---|---|---|---|
| Package | 100-pin TQFP | 100-pin TQFP | 100-pin TQFP | 100-pin TQFP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Device Family | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 |
| Programmable Logic Type | FPGA | FPGA | FPGA | FPGA |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount |
| Ordering Suffix | VQ100I | VQG100I | VQG100 | VQ100 |
মূল পার্থক্যসমূহ
- Exact 100-pin ProASIC3 package continuity (বনামA3P125-VQG100I)
- Closest documented same-family ordering option (বনামA3P125-VQG100)
- Compact 1.5K logic-element implementation (বনামA3P125-VQ100)
ডিজাইন নোট
Route the 100-pin TQFP footprint exactly as defined by the manufacturer package drawing. Keep power and ground distribution consistent with the recommended capacitor arrangement, and place configuration and clock signals where board access remains available. Do not assign pins from a generic TQFP symbol: use the A3P125 pin-description table to distinguish configuration signals, supply pins, grounds, clock inputs, and user I/O.
Define clock ownership before committing the printed circuit board. The A3P125's 71 I/O must be allocated across user interfaces, configuration functions, clocks, and any dedicated pins, leaving insufficient margin if an interface later requires more signals. Review timing against the selected external devices and preserve the manufacturer's guidance for clock and I/O placement to prevent avoidable routing or timing problems.
Do not treat every A3P125 ordering code as an exact substitute. The VQ100I, VQG100I, VQG100, and VQ100 suffixes identify different ordering conditions, while TQG144, FGG144, and PQG208 options use different footprints. Before changing a BOM, verify the decoded suffix, package drawing, temperature requirements, voltage limits, and qualification status for both the installed and proposed part.
কমপ্লায়েন্স তথ্য
No product-specific environmental or automotive qualification declarations were included in the manufacturer product-page excerpt. Confirm the status for the exact ordering suffix before production release.