Microchip Technology

A3P125-VQ100I - 1.5K LE ProASIC3 FPGA | Microchip

MPN: A3P125-VQ100I ✓ פעיל
100-pin TQFP Package 36,864 bits Memory
כמות הזמנה מינימלית: 1 |

A3P125-VQ100I סקירה

The Microchip Technology A3P125-VQ100I is a ProASIC3 field-programmable gate array with 1.5K logic elements, 71 I/O, 36,864 bits of configuration memory, and a 100-pin TQFP package. Its surface-mount package and reprogrammable flash-based architecture support compact embedded systems requiring deterministic programmable logic, flexible peripheral integration, and in-system configuration updates.

A field-programmable gate array, or FPGA, is a programmable digital semiconductor that combines configurable logic blocks, programmable I/O, and internal configuration resources. FPGAs sit within the broader semiconductor and programmable-logic hierarchy, above individual logic gates and microcontrollers. Unlike a fixed-function application-specific integrated circuit, an FPGA allows designers to implement parallel data paths, protocol bridges, control logic, and custom interfaces by programming the device after manufacture.

The A3P125-VQ100I belongs to the ProASIC3 family, which Microchip describes as an ultra-low-density FPGA family emphasizing system performance, small-footprint packages, reprogrammability, and low total cost of ownership. Its 1.5K logic-element configuration is intended for compact glue logic rather than processor-scale systems. The listed 71 I/O provide connections to external memories, sensors, transceivers, control signals, and board-level buses.

The 36,864-bit configuration resource stores the programmed logic design in the device's nonvolatile flash technology. This architecture permits the same board design to be reused when the FPGA configuration changes. Programming support and the final bitstream format should be handled with the programming tools and device documentation specified by Microchip for the ProASIC3 family.

Typical uses include industrial control, communications interface conditioning, data acquisition, embedded protocol conversion, sensor aggregation, and low-volume programmable control. The A3P125-VQ100I is most appropriate when several parallel logic functions are required but the implementation is too small to justify a larger FPGA or a complex microprocessor design.

PCB design should preserve the manufacturer's 100-pin TQFP footprint, power and ground distribution, decoupling arrangement, configuration interface, and exposed programming connections. Because programming, system reset, and configuration behavior are tightly coupled, designers should review the pin-description table and reference design guidance in the manufacturer documentation before assigning PCB signals.

This product page organizes the verified A3P125 device identity, package information, searchable technical questions, and compatible ProASIC3 ordering variants. It also provides practical selection guidance for engineers comparing package codes and designing compact embedded systems without relying on unrelated device families as drop-in replacements.

חלופות תחליף ישיר עבור A3P125-VQ100I — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם A3P125-VQ100I (אותו גורם צורה וטביעת רגל) — שונים ב Configuration Technology, Device Type, Logic Elements, Operating Temperature, Package.

Microchip Technology
Configuration Technology: Flash-based nonvolatile configuration
Device Type: ProASIC3 Field Programmable Gate Array (FPGA)
Logic Elements: 1.5K LEs
השווה עם A3P125-VQ100I →
Microchip Technology
Operating Temperature: -40°C to 125°C (TJ)
השווה עם A3P125-VQ100I →

A3P125-VQG100I

✅ Drop-In
📦 100-pin TQFP
Uses the VQG100I ordering suffix; the cross-reference listing does not quantify a performance difference from the VQ100I version, so supply and qualification codes require verification.

📋 חלופה להתייחסות (לא בקטלוג)

A3P125-VQG100

✅ Drop-In
📦 100-pin TQFP
Uses the VQG100 ordering suffix without the I suffix; a component comparison reports no measurable difference in the primary technical parameters.

📋 חלופה להתייחסות (לא בקטלוג)

A3P125-VQ100T

✅ Drop-In
Microchip Technology
📦 100-pin TQFP
125000 · 3072 · 36864 · 71 · 100-VQFP (14x14 mm) · 1.425V to 1.575V · -40°C to 125°C (TJ) · CMOS

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

A3P125-VQ100I דירוגים מרביים ומאפיינים חשמליים

Device Type ProASIC3 field-programmable gate array
Logic Elements 1.5K logic elements
I/O Count 71 I/O
Configuration Memory 36,864 bits
Programmable Logic Type FPGA
Architecture ProASIC3
Configuration Technology Flash-based
מארז 100-pin TQFP
סוג הרכבה Surface mount
Device Category Ultra-low-density FPGA
Number of User I/O 71 I/O

מדריך תצורת פינים של A3P125-VQ100I 100-pin tqfp

תצורת פינים עבור A3P125-VQ100I (מארזת 100-pin tqfp). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 100-pin tqfp עבור A3P125-VQ100I

אין נתוני פריסת פינים מפורטים עבור A3P125-VQ100I.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

A3P125-VQ100I מתאים עבור 6 יישוםs: Industrial Control Logic, Communications Interface Conditioning, Data Acquisition Front End, Protocol Conversion Bridge, Sensor Aggregation Hub, Low-Volume Programmable Control.

🏭

Industrial Control Logic

The A3P125-VQ100I fits compact industrial-control logic that requires deterministic parallel operation without the overhead of a larger FPGA. Its 1.5K logic elements can host control state machines, interlocks, alarm handling, and actuator-command sequencing, while 71 I/O provide connections to sensors, relays, and machine-control signals. The flash-based ProASIC3 architecture also permits configuration revisions when product variants or field requirements change. Engineers should verify supply-voltage compatibility, operating-temperature limits, and timing behavior against the exact A3P125 ordering code before production release.

🌐

Communications Interface Conditioning

The A3P125-VQ100I can serve as a small communications-interface conditioning device when parallel framing, buffering, and protocol-conversion functions fit within 1.5K logic elements. Its 71 I/O support connections among transceivers, status signals, and buffered data buses without requiring a processor for every simple protocol function. Programmable logic also permits different framing or filtering behavior across product variants. The key design checks are interface voltage compatibility, clock timing, clock-domain structure, and the I/O assignment limits defined in the manufacturer documentation.

📈

Data Acquisition Front End

The A3P125-VQ100I is appropriate for front-end data acquisition tasks that need parallel sampling control, trigger coordination, filtering, and data movement. With 1.5K logic elements, it can implement several fixed-width pipelines or state machines rather than a large processor-based architecture. The 71 available I/O can connect sample-enable signals, sensor outputs, clocks, and acquisition-status indicators. Designers should establish timing margins for the selected external devices, use the pin-description table for clock and control assignments, and verify that the target's voltage and temperature ratings match the measurement environment.

🔄

Protocol Conversion Bridge

The A3P125-VQ100I can implement a compact bridge between two digital interfaces when the required conversion logic remains within the 1.5K-logic-element budget. Typical functions include byte alignment, endian conversion, register translation, and buffering between buses with different control conventions. With 71 I/O, the device can support parallel interfaces and associated handshake signals while keeping the implementation deterministic. Engineers must confirm that the external interfaces share a workable voltage range, account for setup and hold timing, and use the manufacturer pin table to avoid conflicts among clock, configuration, and user signals.

🧩

Sensor Aggregation Hub

The A3P125-VQ100I suits sensor-aggregation designs that must combine several low-bandwidth inputs before transferring data to a host or communications controller. Its programmable fabric can perform threshold checks, scaling, filtering, fault flags, and update sequencing across 71 I/O, while the 1.5K logic elements support multiple small parallel channels. Flash-based programmability enables product-specific sensor maps and calibration behavior without changing the board. Designers should review whether the required number of channels, signal directions, and voltage levels fit the device and whether clocking requirements can be met within the available I/O and routing resources.

🔧

Low-Volume Programmable Control

The A3P125-VQ100I is well suited to low-volume programmable products where a small control engine must support configuration options without creating a dedicated ASIC. Logic blocks can implement sequencing, timers, diagnostics, and communication routines, while 71 I/O connect the controller to displays, switches, relays, and external modules. The 36,864-bit flash configuration resource supports an embedded bitstream, and program updates can reduce the number of board variants. Commercial and industrial deployments should verify lifecycle intent, temperature grade, supply requirements, and programming-tool support for the exact ordering suffix.

סיכום מוצרים מומלצים

A3P125-VQG100I Same 100-pin ProASIC3 ordering family בשימוש ב-: Industrial Control Logic, Communications Interface Conditioning, Data Acquisition Front End, Sensor Aggregation Hub A3P125-VQ100 Microchip Technology בשימוש ב-: Industrial Control Logic, Data Acquisition Front End, Protocol Conversion Bridge, Sensor Aggregation Hub, Low-Volume Programmable Control A3P125-VQG100 Same 100-pin ProASIC3 device family בשימוש ב-: Communications Interface Conditioning, Protocol Conversion Bridge, Low-Volume Programmable Control
What is the A3P125-VQ100I?
The A3P125-VQ100I is a Microchip Technology ProASIC3 FPGA with 1.5K logic elements, 71 I/O, and 36,864 bits of configuration memory in a 100-pin TQFP package. According to the Microchip A3P125 product page, ProASIC3 provides reprogrammable, ultra-low-density logic devices in small-footprint packages. It is suited to compact control, interface, and data-processing functions that benefit from parallel hardware implementation.
How many logic elements and I/O does the A3P125-VQ100I have?
The A3P125-VQ100I contains 1.5K logic elements and provides 71 I/O. The product listing identifies the device as a ProASIC3 FPGA in a 100-pin TQFP package, while the Mouser listing independently identifies the 1.5K logic-element configuration. These figures position the part as an ultra-low-density FPGA intended for parallel control, signal conditioning, and interface logic rather than high-complexity parallel processing.
Where can I download the A3P125-VQ100I datasheet PDF?
The official A3P125-VQ100I documentation is available through the Microchip A3P125 product page at https://www.microchip.com/en-us/product/A3P125. Select the device documentation for the ProASIC3 family and the A3P125 ordering information. The Octopart datasheet page at https://octopart.com/datasheet/microchip/A3P125-VQ100I also links to document resources, but the manufacturer page is the preferred authority for revisions.
Where can I find the A3P125-VQ100I pinout?
The pinout should be taken from the manufacturer pin-description table for the A3P125 in its 100-pin TQFP ordering configuration. The package identity is confirmed as 100-pin TQFP, but individual signal names are not reproduced here because they were not included in the product documentation excerpt. Use the pin-description table to map configuration pins, power, ground, clock, and user I/O before releasing the PCB layout.
Is A3P125-VQ100I suitable for industrial control systems?
The A3P125-VQ100I is technically suitable for compact industrial-control logic when its voltage, temperature, and timing limits meet the system requirements. Its 1.5K logic elements, 71 I/O, and flash-based reprogrammability support deterministic control and interface tasks. For production use, verify the exact temperature grade and supply limits in the A3P125 documentation and confirm component availability through the Request a Quote form.
What is the difference between A3P125-VQ100I and A3P125-VQG100I?
A3P125-VQ100I and A3P125-VQG100I are separate ordering variants of the A3P125 device, with their package and temperature or ordering codes requiring careful interpretation. The A3P125-VQG100I variant appears in component cross-reference material, while the A3P125-VQ100I listing identifies the exact orderable part. Consult the manufacturer ordering guide before treating either variant as interchangeable.
Can A3P125-VQ100I replace A3P125-VQG100?
A3P125-VQG100 can be considered as a close ordering alternative to A3P125-VQ100I, but interchangeability depends on the decoded package, temperature, and ordering suffixes. A component comparison identifies A3P125-VQG100 and A3P125-VQG100I as having identical primary performance profiles. Confirm the A3P125-VQ100I ordering code and qualification requirements in the manufacturer documentation before replacing an assembled design.
What is the best drop-in replacement for A3P125-VQ100I?
The closest supported drop-in candidates are the 100-pin A3P125 ordering variants A3P125-VQG100I, A3P125-VQG100, and A3P125-VQ100. All must be checked against the target's decoded ordering suffixes and qualification requirements. A3P125 package variants using 144-pin or 208-pin packages are not drop-in replacements because their footprints differ, regardless of logic capacity.
When should I choose A3P125-VQ100I over another ProASIC3 device?
Choose A3P125-VQ100I when a design requires the specific 1.5K-logic-element A3P125 configuration, 71 I/O, and a 100-pin TQFP footprint. Select another ProASIC3 device when it offers more logic, more I/O, a smaller package, or a different qualification grade. The A3P125 is best suited to compact glue-logic and protocol tasks rather than designs requiring a large FPGA fabric.
Is A3P125-VQ100I suitable for a communications interface?
The A3P125-VQ100I can suit small communications-interface tasks when the required data paths fit 1.5K logic elements and 71 I/O. Its flash-based reprogrammability allows protocol logic to be updated without changing the PCB. Designers must still verify I/O voltage compatibility, timing margin, clocking requirements, and interface protocol performance against the specific system constraints.
What is the A3P125-VQ100I used for?
The A3P125-VQ100I is used for compact programmable logic in industrial control, communications interfaces, data acquisition, protocol conversion, sensor aggregation, and embedded control. Its 1.5K logic elements allow multiple simple state machines or parallel datapaths to execute simultaneously. It is most useful when fixed-function logic would be cumbersome but a larger controller would be unnecessary.
How does the A3P125-VQ100I compare with other A3P125 package options?
The A3P125-VQ100I uses a 100-pin TQFP package, while A3P125 options referenced by part-search data include 144-pin TQG, 144-pin FGG, and 208-pin PQG configurations. These alternatives may offer different pin counts and board-area requirements, so they are not direct footprint replacements for a 100-pin design. Choose them only when the PCB and system I/O requirements are intentionally being redesigned.
Is A3P125-VQ100I in stock and what is its lead time?
Current stock, minimum order quantity, and production lead time should be confirmed through the Request a Quote form on this page. The presence of an authorized distributor listing shows market availability but does not guarantee an immediately allocatable quantity. The request should identify the exact A3P125-VQ100I ordering code, the 100-pin TQFP package, and the required delivery date.
How much does the A3P125-VQ100I cost?
Use the Request a Quote form on this page for a current quotation and volume-break review for the A3P125-VQ100I. The structured quote process accounts for the exact ordering suffix, required quantity, and delivery schedule. Confirm whether any source assembly or test requirements need to accompany the order before accepting the quotation.
Where can I buy A3P125-VQ100I online?
The A3P125-VQ100I can be requested through the Request a Quote form on this page. Specify the required quantity, target date, and whether the shipment must use manufacturer-standard packaging. Because exact suffix codes can represent different grade or ordering conditions, include A3P125-VQ100I in every line of the request and verify the full part number on the order confirmation.

נתוני עזר הנדסיים עבור A3P125-VQ100I — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the A3P125-VQ100I for a new 100-pin TQFP design that requires the specified 1.5K-logic-element ProASIC3 configuration, 71 I/O, and flash-based programmability. A3P125-VQG100I is the closest same-package ordering candidate, but its suffix must be checked against temperature and qualification requirements. A3P125-VQG100 is useful when its ordering conditions meet the product specification, with the component comparison reporting identical primary performance. A3P125-VQ100 is another possible 100-pin family option, although its suffix differences require manufacturer confirmation. Do not use the suggested 144-pin or 208-pin A3P125 options as drop-in replacements because their footprints differ. If the design outgrows the 1.5K logic-element budget, requires more I/O, or needs a smaller package, migrate to a different ProASIC3 capacity rather than forcing an incompatible package onto the existing PCB.

השוואה עם חלופות

פרמטר מוצר זה A3P125-VQG100I A3P125-VQG100 A3P125-VQ100
Package 100-pin TQFP 100-pin TQFP 100-pin TQFP 100-pin TQFP
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Device Family ProASIC3 ProASIC3 ProASIC3 ProASIC3
Programmable Logic Type FPGA FPGA FPGA FPGA
Mounting Type Surface mount Surface mount Surface mount Surface mount
Ordering Suffix VQ100I VQG100I VQG100 VQ100

מבדילים עיקריים

  • Exact 100-pin ProASIC3 package continuity (לעומתA3P125-VQG100I)
  • Closest documented same-family ordering option (לעומתA3P125-VQG100)
  • Compact 1.5K logic-element implementation (לעומתA3P125-VQ100)

הערות תכנון

Route the 100-pin TQFP footprint exactly as defined by the manufacturer package drawing. Keep power and ground distribution consistent with the recommended capacitor arrangement, and place configuration and clock signals where board access remains available. Do not assign pins from a generic TQFP symbol: use the A3P125 pin-description table to distinguish configuration signals, supply pins, grounds, clock inputs, and user I/O.

Define clock ownership before committing the printed circuit board. The A3P125's 71 I/O must be allocated across user interfaces, configuration functions, clocks, and any dedicated pins, leaving insufficient margin if an interface later requires more signals. Review timing against the selected external devices and preserve the manufacturer's guidance for clock and I/O placement to prevent avoidable routing or timing problems.

Do not treat every A3P125 ordering code as an exact substitute. The VQ100I, VQG100I, VQG100, and VQ100 suffixes identify different ordering conditions, while TQG144, FGG144, and PQG208 options use different footprints. Before changing a BOM, verify the decoded suffix, package drawing, temperature requirements, voltage limits, and qualification status for both the installed and proposed part.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

No product-specific environmental or automotive qualification declarations were included in the manufacturer product-page excerpt. Confirm the status for the exact ordering suffix before production release.

הנתונים אומתו בתאריך: 2026-11-08 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

a3p125 vqg100i a3p125 pqg208i a3p125 tqg144 a3p125 vqg100 a3p125 fgg144 actel a3p125 A3P125-VQ100I datasheet A3P125-VQ100I datasheet pdf A3P125-VQ100I pinout A3P125-VQ100I equivalent A3P125-VQ100I replacement A3P125-VQ100I 100 pin TQFP A3P125-VQ100I price A3P125-VQ100I stock A3P125-VQ100I vs A3P125-VQG100

רכיבים ומונחים קשורים

Microchip Technology A3P125-VQ100I A3P125-VQG100I A3P125-VQG100 A3P125-VQ100 A3P125 ProASIC3 field-programmable gate array FPGA programmable logic flash-based configuration logic element user I/O configuration memory 100-pin TQFP TQFP package family surface-mount technology SMD industrial control communications interface data acquisition protocol conversion sensor aggregation embedded control
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר