A3P125-VQ100I - 1.5K LE ProASIC3 FPGA | Microchip
MPN: A3P125-VQ100I ✓ 啟用中A3P125-VQ100I 概覽
A field-programmable gate array, or FPGA, is a programmable digital semiconductor that combines configurable logic blocks, programmable I/O, and internal configuration resources. FPGAs sit within the broader semiconductor and programmable-logic hierarchy, above individual logic gates and microcontrollers. Unlike a fixed-function application-specific integrated circuit, an FPGA allows designers to implement parallel data paths, protocol bridges, control logic, and custom interfaces by programming the device after manufacture.
The A3P125-VQ100I belongs to the ProASIC3 family, which Microchip describes as an ultra-low-density FPGA family emphasizing system performance, small-footprint packages, reprogrammability, and low total cost of ownership. Its 1.5K logic-element configuration is intended for compact glue logic rather than processor-scale systems. The listed 71 I/O provide connections to external memories, sensors, transceivers, control signals, and board-level buses.
The 36,864-bit configuration resource stores the programmed logic design in the device's nonvolatile flash technology. This architecture permits the same board design to be reused when the FPGA configuration changes. Programming support and the final bitstream format should be handled with the programming tools and device documentation specified by Microchip for the ProASIC3 family.
Typical uses include industrial control, communications interface conditioning, data acquisition, embedded protocol conversion, sensor aggregation, and low-volume programmable control. The A3P125-VQ100I is most appropriate when several parallel logic functions are required but the implementation is too small to justify a larger FPGA or a complex microprocessor design.
PCB design should preserve the manufacturer's 100-pin TQFP footprint, power and ground distribution, decoupling arrangement, configuration interface, and exposed programming connections. Because programming, system reset, and configuration behavior are tightly coupled, designers should review the pin-description table and reference design guidance in the manufacturer documentation before assigning PCB signals.
This product page organizes the verified A3P125 device identity, package information, searchable technical questions, and compatible ProASIC3 ordering variants. It also provides practical selection guidance for engineers comparing package codes and designing compact embedded systems without relying on unrelated device families as drop-in replacements.
直接替換替代品,適用於 A3P125-VQ100I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: A3P125-VQ100I (相同外形與佔位) — 差異在於 Configuration Technology, Device Type, Logic Elements, Operating Temperature, Package.
A3P125-VQG100I
✅ 直接替換📋 參考替代品(不在目錄中)
A3P125-VQG100
✅ 直接替換📋 參考替代品(不在目錄中)
A3P125-VQ100T
✅ 直接替換聯絡詢價
查看資料表 →A3P125-VQ100I 最大額定值與電氣特性
| Device Type | ProASIC3 field-programmable gate array |
| Logic Elements | 1.5K logic elements |
| I/O Count | 71 I/O |
| Configuration Memory | 36,864 bits |
| Programmable Logic Type | FPGA |
| Architecture | ProASIC3 |
| Configuration Technology | Flash-based |
| 封裝 | 100-pin TQFP |
| 安裝類型 | Surface mount |
| Device Category | Ultra-low-density FPGA |
| Number of User I/O | 71 I/O |
A3P125-VQ100I 100-pin tqfp 腳位配置指南
A3P125-VQ100I(100-pin tqfp 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: A3P125-VQ100I.
請參閱 資料表 以查看完整腳位配置。
典型應用
A3P125-VQ100I 適用於 6 應用s: Industrial Control Logic, Communications Interface Conditioning, Data Acquisition Front End, Protocol Conversion Bridge, Sensor Aggregation Hub, Low-Volume Programmable Control.
Industrial Control Logic
The A3P125-VQ100I fits compact industrial-control logic that requires deterministic parallel operation without the overhead of a larger FPGA. Its 1.5K logic elements can host control state machines, interlocks, alarm handling, and actuator-command sequencing, while 71 I/O provide connections to sensors, relays, and machine-control signals. The flash-based ProASIC3 architecture also permits configuration revisions when product variants or field requirements change. Engineers should verify supply-voltage compatibility, operating-temperature limits, and timing behavior against the exact A3P125 ordering code before production release.
推薦
Communications Interface Conditioning
The A3P125-VQ100I can serve as a small communications-interface conditioning device when parallel framing, buffering, and protocol-conversion functions fit within 1.5K logic elements. Its 71 I/O support connections among transceivers, status signals, and buffered data buses without requiring a processor for every simple protocol function. Programmable logic also permits different framing or filtering behavior across product variants. The key design checks are interface voltage compatibility, clock timing, clock-domain structure, and the I/O assignment limits defined in the manufacturer documentation.
推薦
Data Acquisition Front End
The A3P125-VQ100I is appropriate for front-end data acquisition tasks that need parallel sampling control, trigger coordination, filtering, and data movement. With 1.5K logic elements, it can implement several fixed-width pipelines or state machines rather than a large processor-based architecture. The 71 available I/O can connect sample-enable signals, sensor outputs, clocks, and acquisition-status indicators. Designers should establish timing margins for the selected external devices, use the pin-description table for clock and control assignments, and verify that the target's voltage and temperature ratings match the measurement environment.
推薦
Protocol Conversion Bridge
The A3P125-VQ100I can implement a compact bridge between two digital interfaces when the required conversion logic remains within the 1.5K-logic-element budget. Typical functions include byte alignment, endian conversion, register translation, and buffering between buses with different control conventions. With 71 I/O, the device can support parallel interfaces and associated handshake signals while keeping the implementation deterministic. Engineers must confirm that the external interfaces share a workable voltage range, account for setup and hold timing, and use the manufacturer pin table to avoid conflicts among clock, configuration, and user signals.
推薦
Sensor Aggregation Hub
The A3P125-VQ100I suits sensor-aggregation designs that must combine several low-bandwidth inputs before transferring data to a host or communications controller. Its programmable fabric can perform threshold checks, scaling, filtering, fault flags, and update sequencing across 71 I/O, while the 1.5K logic elements support multiple small parallel channels. Flash-based programmability enables product-specific sensor maps and calibration behavior without changing the board. Designers should review whether the required number of channels, signal directions, and voltage levels fit the device and whether clocking requirements can be met within the available I/O and routing resources.
推薦
Low-Volume Programmable Control
The A3P125-VQ100I is well suited to low-volume programmable products where a small control engine must support configuration options without creating a dedicated ASIC. Logic blocks can implement sequencing, timers, diagnostics, and communication routines, while 71 I/O connect the controller to displays, switches, relays, and external modules. The 36,864-bit flash configuration resource supports an embedded bitstream, and program updates can reduce the number of board variants. Commercial and industrial deployments should verify lifecycle intent, temperature grade, supply requirements, and programming-tool support for the exact ordering suffix.
推薦
推薦產品摘要
工程參考資料,適用於 A3P125-VQ100I — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | A3P125-VQG100I | A3P125-VQG100 | A3P125-VQ100 |
|---|---|---|---|---|
| Package | 100-pin TQFP | 100-pin TQFP | 100-pin TQFP | 100-pin TQFP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Device Family | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 |
| Programmable Logic Type | FPGA | FPGA | FPGA | FPGA |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount |
| Ordering Suffix | VQ100I | VQG100I | VQG100 | VQ100 |
主要差異化特點
- Exact 100-pin ProASIC3 package continuity (對比A3P125-VQG100I)
- Closest documented same-family ordering option (對比A3P125-VQG100)
- Compact 1.5K logic-element implementation (對比A3P125-VQ100)
設計說明
Route the 100-pin TQFP footprint exactly as defined by the manufacturer package drawing. Keep power and ground distribution consistent with the recommended capacitor arrangement, and place configuration and clock signals where board access remains available. Do not assign pins from a generic TQFP symbol: use the A3P125 pin-description table to distinguish configuration signals, supply pins, grounds, clock inputs, and user I/O.
Define clock ownership before committing the printed circuit board. The A3P125's 71 I/O must be allocated across user interfaces, configuration functions, clocks, and any dedicated pins, leaving insufficient margin if an interface later requires more signals. Review timing against the selected external devices and preserve the manufacturer's guidance for clock and I/O placement to prevent avoidable routing or timing problems.
Do not treat every A3P125 ordering code as an exact substitute. The VQ100I, VQG100I, VQG100, and VQ100 suffixes identify different ordering conditions, while TQG144, FGG144, and PQG208 options use different footprints. Before changing a BOM, verify the decoded suffix, package drawing, temperature requirements, voltage limits, and qualification status for both the installed and proposed part.
合規資訊
No product-specific environmental or automotive qualification declarations were included in the manufacturer product-page excerpt. Confirm the status for the exact ordering suffix before production release.