ATTINY261A-MF - 20MHz 8-Bit AVR MCU | Microchip Technology
MPN: ATTINY261A-MF ✓ פעילATTINY261A-MF סקירה
A microcontroller is an integrated semiconductor device containing a processor core, program memory, data memory, and peripherals on one package. The ATTINY261A belongs to the tinyAVR family, a low-power segment of the AVR 8-bit RISC architecture. Its picoPower design is intended for small, cost-sensitive systems that need deterministic digital control without adopting a larger general-purpose processor.
Key device resources include 2 KB of in-system programmable Flash, 128 bytes of EEPROM, 128 bytes of SRAM, 16 I/O lines, and 32 working registers. The device operates at up to 20 MHz and includes an 8-bit timer/counter with compare modes according to the Microchip ATtiny261A product description. Its 32-QFN package supports compact surface-mount layouts while retaining access to 16 I/O pins.
The 2 KB Flash footprint is suitable for compact firmware containing initialization code, a state machine, periodic control routines, and communication or sensing logic. EEPROM provides 128 bytes of nonvolatile data storage for calibration values, counters, configuration data, or serial numbers. The 128-byte SRAM supports stack space, variables, and working state, so designers should keep RAM allocation and call depth within that limited budget.
Typical uses include compact motor controllers, sensor nodes, small control panels, dimmable lighting modules, and embedded accessories where an 8-bit processor, limited I/O, and low component count are valuable. The QFN package also makes the device appropriate for space-constrained consumer and industrial modules when board area, assembly capability, and thermal performance are carefully considered.
For PCB design, follow the manufacturer’s QFN land pattern and pin-assignment table, place decoupling capacitors close to the supply pins, and keep programming and clock-routing areas free of noisy switching nodes. Programming should use the supported AVR ISP workflow, and unused I/O pins should be configured appropriately rather than left floating.
This page combines manufacturer device information, package and memory characteristics, application guidance, cross-reference findings, and practical design considerations. It also identifies when the original ATtiny261 or related tinyAVR family parts can support a migration without treating functionally related devices as automatic replacements.
חלופות תחליף ישיר עבור ATTINY261A-MF — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם ATTINY261A-MF (אותו גורם צורה וטביעת רגל) — שונים ב Package, SRAM, Architecture, Product Type, Flash Memory.
ATTINY261A-MFR
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ATTINY261A-MU
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←ATTINY461A-PU
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←ATTINY861A-MU
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←ATTINY461A-MU
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←ATTINY261A-MF דירוגים מרביים ומאפיינים חשמליים
| Product Type | 8-bit RISC microcontroller |
| Architecture | AVR with picoPower technology |
| תדר שעון מקסימלי | 20 MHz |
| Flash Memory | 2 KB (1K x 16) |
| EEPROM Memory | 128 bytes |
| SRAM | 128 bytes |
| General-Purpose I/O Lines | 16 lines |
| General-Purpose Working Registers | 32 registers |
| Timer/Counter | 8-bit timer/counter with compare modes |
| מארז | 32-QFN, 5 x 5 mm |
| סוג הרכבה | Surface mount |
| Industrial Temperature Range | -40°C to +125°C |
| Program Memory Type | In-system programmable Flash |
| Green Status | Green |
מדריך תצורת פינים של ATTINY261A-MF 32-qfn, 5 x 5 mm
תצורת פינים עבור ATTINY261A-MF (מארזת 32-qfn, 5 x 5 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור ATTINY261A-MF.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
ATTINY261A-MF מתאים עבור 6 יישוםs: Compact Industrial Sensor Node, Small Motor Controller, Dimmable LED Lighting Module, Embedded Control Panel Interface, Battery-Powered IoT Accessory, Consumer Appliance Auxiliary Controller.
Compact Industrial Sensor Node
The ATTINY261A-MF fits compact sensor nodes that periodically measure an analog condition, apply filtering, and publish a status or event. Its 16 general-purpose I/O lines leave adequate interface capacity for sensors, indicators, and digital control signals, while the 20 MHz AVR core supports responsive input handling. The device includes 128 bytes of EEPROM for calibration constants and 128 bytes of SRAM for working variables. A typical implementation uses a timer for periodic sampling, serial communication for data transfer, and constrained firmware to remain within the 2 KB Flash limit. Its -40°C to +125°C industrial temperature range supports controlled industrial environments when the complete power and signal chain is also rated appropriately.
מומלץ
Small Motor Controller
ATTINY261A-MF can manage a small motor-control system built around discrete switching elements, where its 8-bit timer/counter and compare modes simplify timing tasks. The 20 MHz clock permits responsive control-loop execution, and 16 I/O lines can support a control input, direction signals, a fault input, and status indicators. Firmware can implement acceleration profiles, duty-cycle limits, and timeout handling within the available 2 KB Flash. Because SRAM is limited to 128 bytes, the control code should avoid large motion buffers and should track state in compact variables. The 32-QFN package also reduces board area compared with larger leaded microcontroller packages.
מומלץ
Dimmable LED Lighting Module
The ATTINY261A-MF is appropriate for a compact dimmable lighting module that accepts a control command and drives an LED stage through external circuitry. Its timer resources can generate repeatable timing intervals or PWM-related control sequences, while the 16 I/O pins can connect a button, communications input, status LED, and enable signal. The 2 KB Flash capacity supports compact state management, calibration tables, and deliberate flicker-control routines without requiring a large control processor. With only 128 bytes of SRAM, avoid large frame buffers and unnecessary library buffering. Validate LED-current limits and thermal performance in the external driver stage rather than treating the microcontroller pins as the power device.
מומלץ
Embedded Control Panel Interface
ATTINY261A-MF can serve as the controller for a small user-interface module containing buttons, indicator outputs, and a serial link to a higher-level processor. The 16 I/O lines support multiple inputs and outputs, while 128 bytes of EEPROM can retain configuration such as calibration offsets, device identity, or operating mode. At 20 MHz, the AVR core can debounce controls and refresh indicators efficiently. The compact 32-QFN 5 x 5 mm package is useful where PCB space is constrained. Firmware should remain conservative because the 2 KB Flash and 128-byte SRAM limits favor event-driven code, short routines, and carefully bounded communication buffers.
מומלץ
Battery-Powered IoT Accessory
The ATTINY261A-MF suits a small battery-powered accessory that wakes periodically, senses its environment, and communicates briefly before returning to a low-power state. The picoPower architecture and compact tinyAVR resource set can help minimize board size in wearable-adjacent or smart-home accessories. Sixteen I/O lines are sufficient for a sensor, a pushbutton, a status indicator, and a low-speed communications interface, while EEPROM preserves a small amount of nonvolatile configuration. Design the sleep and wake paths carefully because 2 KB of Flash and 128 bytes of SRAM constrain the application. Select external sensors and radio modules for low standby consumption, and verify the complete current profile rather than estimating only controller activity.
מומלץ
Consumer Appliance Auxiliary Controller
ATTINY261A-MF can act as an auxiliary controller in a compact consumer appliance where a simple machine handles mode selection, timing, interlock checking, and panel communication. The 20 MHz AVR core supports responsive state-machine updates, and the 8-bit timer/counter can establish operating intervals without relying on software delays. EEPROM can hold small configuration values, although write endurance should be considered for frequently changing records. The 32-QFN package helps minimize board area, but assembly and inspection processes must support its fine-pitch leadless construction. Firmware should include safe default states after reset, validate external interlocks, and keep the program within the 2 KB Flash capacity.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור ATTINY261A-MF — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | ATTINY261A-MFR | ATtiny261 | ATtiny461A | ATtiny861A | ATTINY461A-MU |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | QFN-32 (5 x 5 mm) | QFN-32 (5 x 5 mm) | QFN-32 (5 x 5 mm) | QFN-32 (5 x 5 mm) | QFN-32 (5 x 5 mm) | QFN-32 (5 x 5 mm) |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Flash Memory | 2 KB | 2 KB | 2 KB | 4 KB | 8 KB | 4 KB |
| Programming Architecture | AVR RISC, picoPower | AVR RISC, picoPower | AVR RISC | AVR RISC, picoPower | AVR RISC, picoPower | AVR RISC, picoPower |
מבדילים עיקריים
- Exact same-device ordering option (לעומתATTINY261A-MFR)
- Direct migration path within the legacy tinyAVR family (לעומתATtiny261)
- Footprint-compatible expansion path for memory-constrained firmware (לעומתATtiny461A)
- Largest Flash option in the compatible family (לעומתATtiny861A)
הערות תכנון
Use the manufacturer’s 32-QFN land pattern and exposed-pad recommendations rather than a generic QFN footprint. Place the supply decoupling capacitor close to the device power pins, connect ground pins and the exposed thermal pad to the appropriate ground plane, and route the ISP interface away from high-current switching nodes. The fine-pitch leadless package also requires assembly capability and inspection rules appropriate for a 5 x 5 mm QFN.
Do not assume that all related tinyAVR devices are interchangeable in every respect. The ATtiny261A/461A/861A family is pin-compatible, but available Flash differs across the family, and migration documentation notes that some electrical characteristics can change between manufacturing generations. Verify the linked Flash size, SRAM allocation, fuse configuration, clock setup, and electrical limits in the Microchip documentation before approving a substitute.
Estimated firmware memory use: a 2 KB Flash device provides 2048 bytes of program storage before accounting for the boot section, vector table, and reserved bootloader area. Check the final linker map because the usable application space is lower than the nominal device total. Also budget the 128-byte SRAM carefully, including stack, global variables, and library allocations; reduce buffering or choose ATtiny461A or ATtiny861A if the linked image exceeds the target capacity.
Keep the oscillator circuit and ISP programming nets short, and provide test access for clock, reset, and programming signals. If the design uses an external clock or crystal, follow the source and load requirements stated for the selected operating mode. Avoid routing sensitive timing or measurement signals beneath noisy power-stage footprints, and assign unused I/O pins to defined firmware states rather than allowing floating inputs.
מידע על תאימות
The product is described as green in the component listing, but detailed RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations are not stated. The related manufacturer family PDF mentions ISO-TS 16949 development and manufacturing requirements, but that statement alone is not treated as an AEC-Q100 qualification for ATTINY261A-MF.