ATTINY261A-MF - 20MHz 8-Bit AVR MCU | Microchip Technology
부품 번호: ATTINY261A-MF ✓ 활성ATTINY261A-MF 개요
A microcontroller is an integrated semiconductor device containing a processor core, program memory, data memory, and peripherals on one package. The ATTINY261A belongs to the tinyAVR family, a low-power segment of the AVR 8-bit RISC architecture. Its picoPower design is intended for small, cost-sensitive systems that need deterministic digital control without adopting a larger general-purpose processor.
Key device resources include 2 KB of in-system programmable Flash, 128 bytes of EEPROM, 128 bytes of SRAM, 16 I/O lines, and 32 working registers. The device operates at up to 20 MHz and includes an 8-bit timer/counter with compare modes according to the Microchip ATtiny261A product description. Its 32-QFN package supports compact surface-mount layouts while retaining access to 16 I/O pins.
The 2 KB Flash footprint is suitable for compact firmware containing initialization code, a state machine, periodic control routines, and communication or sensing logic. EEPROM provides 128 bytes of nonvolatile data storage for calibration values, counters, configuration data, or serial numbers. The 128-byte SRAM supports stack space, variables, and working state, so designers should keep RAM allocation and call depth within that limited budget.
Typical uses include compact motor controllers, sensor nodes, small control panels, dimmable lighting modules, and embedded accessories where an 8-bit processor, limited I/O, and low component count are valuable. The QFN package also makes the device appropriate for space-constrained consumer and industrial modules when board area, assembly capability, and thermal performance are carefully considered.
For PCB design, follow the manufacturer’s QFN land pattern and pin-assignment table, place decoupling capacitors close to the supply pins, and keep programming and clock-routing areas free of noisy switching nodes. Programming should use the supported AVR ISP workflow, and unused I/O pins should be configured appropriately rather than left floating.
This page combines manufacturer device information, package and memory characteristics, application guidance, cross-reference findings, and practical design considerations. It also identifies when the original ATtiny261 or related tinyAVR family parts can support a migration without treating functionally related devices as automatic replacements.
드롭인 대체품: ATTINY261A-MF — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: ATTINY261A-MF (동일 폼 팩터 및 풋프린트) — 차이점: Package, SRAM, Architecture, Product Type, Flash Memory.
ATTINY261A-MFR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
ATTINY261A-MU
✅ 드롭인가격 문의
데이터시트 보기 →ATTINY461A-PU
✅ 드롭인가격 문의
데이터시트 보기 →ATTINY861A-MU
✅ 드롭인가격 문의
데이터시트 보기 →ATTINY461A-MU
✅ 드롭인가격 문의
데이터시트 보기 →ATTINY261A-MF 최대 정격 & 전기적 특성
| Product Type | 8-bit RISC microcontroller |
| Architecture | AVR with picoPower technology |
| 최대 클록 주파수 | 20 MHz |
| Flash Memory | 2 KB (1K x 16) |
| EEPROM Memory | 128 bytes |
| SRAM | 128 bytes |
| General-Purpose I/O Lines | 16 lines |
| General-Purpose Working Registers | 32 registers |
| Timer/Counter | 8-bit timer/counter with compare modes |
| 패키지 | 32-QFN, 5 x 5 mm |
| 실장 유형 | Surface mount |
| Industrial Temperature Range | -40°C to +125°C |
| Program Memory Type | In-system programmable Flash |
| Green Status | Green |
ATTINY261A-MF 32-qfn, 5 x 5 mm 핀 구성 가이드
ATTINY261A-MF(32-qfn, 5 x 5 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: ATTINY261A-MF.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ATTINY261A-MF 적합 용도: 6 애플리케이션s: Compact Industrial Sensor Node, Small Motor Controller, Dimmable LED Lighting Module, Embedded Control Panel Interface, Battery-Powered IoT Accessory, Consumer Appliance Auxiliary Controller.
Compact Industrial Sensor Node
The ATTINY261A-MF fits compact sensor nodes that periodically measure an analog condition, apply filtering, and publish a status or event. Its 16 general-purpose I/O lines leave adequate interface capacity for sensors, indicators, and digital control signals, while the 20 MHz AVR core supports responsive input handling. The device includes 128 bytes of EEPROM for calibration constants and 128 bytes of SRAM for working variables. A typical implementation uses a timer for periodic sampling, serial communication for data transfer, and constrained firmware to remain within the 2 KB Flash limit. Its -40°C to +125°C industrial temperature range supports controlled industrial environments when the complete power and signal chain is also rated appropriately.
추천
Small Motor Controller
ATTINY261A-MF can manage a small motor-control system built around discrete switching elements, where its 8-bit timer/counter and compare modes simplify timing tasks. The 20 MHz clock permits responsive control-loop execution, and 16 I/O lines can support a control input, direction signals, a fault input, and status indicators. Firmware can implement acceleration profiles, duty-cycle limits, and timeout handling within the available 2 KB Flash. Because SRAM is limited to 128 bytes, the control code should avoid large motion buffers and should track state in compact variables. The 32-QFN package also reduces board area compared with larger leaded microcontroller packages.
추천
Dimmable LED Lighting Module
The ATTINY261A-MF is appropriate for a compact dimmable lighting module that accepts a control command and drives an LED stage through external circuitry. Its timer resources can generate repeatable timing intervals or PWM-related control sequences, while the 16 I/O pins can connect a button, communications input, status LED, and enable signal. The 2 KB Flash capacity supports compact state management, calibration tables, and deliberate flicker-control routines without requiring a large control processor. With only 128 bytes of SRAM, avoid large frame buffers and unnecessary library buffering. Validate LED-current limits and thermal performance in the external driver stage rather than treating the microcontroller pins as the power device.
추천
Embedded Control Panel Interface
ATTINY261A-MF can serve as the controller for a small user-interface module containing buttons, indicator outputs, and a serial link to a higher-level processor. The 16 I/O lines support multiple inputs and outputs, while 128 bytes of EEPROM can retain configuration such as calibration offsets, device identity, or operating mode. At 20 MHz, the AVR core can debounce controls and refresh indicators efficiently. The compact 32-QFN 5 x 5 mm package is useful where PCB space is constrained. Firmware should remain conservative because the 2 KB Flash and 128-byte SRAM limits favor event-driven code, short routines, and carefully bounded communication buffers.
추천
Battery-Powered IoT Accessory
The ATTINY261A-MF suits a small battery-powered accessory that wakes periodically, senses its environment, and communicates briefly before returning to a low-power state. The picoPower architecture and compact tinyAVR resource set can help minimize board size in wearable-adjacent or smart-home accessories. Sixteen I/O lines are sufficient for a sensor, a pushbutton, a status indicator, and a low-speed communications interface, while EEPROM preserves a small amount of nonvolatile configuration. Design the sleep and wake paths carefully because 2 KB of Flash and 128 bytes of SRAM constrain the application. Select external sensors and radio modules for low standby consumption, and verify the complete current profile rather than estimating only controller activity.
추천
Consumer Appliance Auxiliary Controller
ATTINY261A-MF can act as an auxiliary controller in a compact consumer appliance where a simple machine handles mode selection, timing, interlock checking, and panel communication. The 20 MHz AVR core supports responsive state-machine updates, and the 8-bit timer/counter can establish operating intervals without relying on software delays. EEPROM can hold small configuration values, although write endurance should be considered for frequently changing records. The 32-QFN package helps minimize board area, but assembly and inspection processes must support its fine-pitch leadless construction. Firmware should include safe default states after reset, validate external interlocks, and keep the program within the 2 KB Flash capacity.
추천
추천 제품 요약
엔지니어링 참조 데이터: ATTINY261A-MF — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ATTINY261A-MFR | ATtiny261 | ATtiny461A | ATtiny861A | ATTINY461A-MU |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | QFN-32 (5 x 5 mm) | QFN-32 (5 x 5 mm) | QFN-32 (5 x 5 mm) | QFN-32 (5 x 5 mm) | QFN-32 (5 x 5 mm) | QFN-32 (5 x 5 mm) |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Flash Memory | 2 KB | 2 KB | 2 KB | 4 KB | 8 KB | 4 KB |
| Programming Architecture | AVR RISC, picoPower | AVR RISC, picoPower | AVR RISC | AVR RISC, picoPower | AVR RISC, picoPower | AVR RISC, picoPower |
주요 차별점
- Exact same-device ordering option (vs ATTINY261A-MFR)
- Direct migration path within the legacy tinyAVR family (vs ATtiny261)
- Footprint-compatible expansion path for memory-constrained firmware (vs ATtiny461A)
- Largest Flash option in the compatible family (vs ATtiny861A)
설계 노트
Use the manufacturer’s 32-QFN land pattern and exposed-pad recommendations rather than a generic QFN footprint. Place the supply decoupling capacitor close to the device power pins, connect ground pins and the exposed thermal pad to the appropriate ground plane, and route the ISP interface away from high-current switching nodes. The fine-pitch leadless package also requires assembly capability and inspection rules appropriate for a 5 x 5 mm QFN.
Do not assume that all related tinyAVR devices are interchangeable in every respect. The ATtiny261A/461A/861A family is pin-compatible, but available Flash differs across the family, and migration documentation notes that some electrical characteristics can change between manufacturing generations. Verify the linked Flash size, SRAM allocation, fuse configuration, clock setup, and electrical limits in the Microchip documentation before approving a substitute.
Estimated firmware memory use: a 2 KB Flash device provides 2048 bytes of program storage before accounting for the boot section, vector table, and reserved bootloader area. Check the final linker map because the usable application space is lower than the nominal device total. Also budget the 128-byte SRAM carefully, including stack, global variables, and library allocations; reduce buffering or choose ATtiny461A or ATtiny861A if the linked image exceeds the target capacity.
Keep the oscillator circuit and ISP programming nets short, and provide test access for clock, reset, and programming signals. If the design uses an external clock or crystal, follow the source and load requirements stated for the selected operating mode. Avoid routing sensitive timing or measurement signals beneath noisy power-stage footprints, and assign unused I/O pins to defined firmware states rather than allowing floating inputs.
규정 준수 정보
The product is described as green in the component listing, but detailed RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations are not stated. The related manufacturer family PDF mentions ISO-TS 16949 development and manufacturing requirements, but that statement alone is not treated as an AEC-Q100 qualification for ATTINY261A-MF.