Microchip Technology

KSZ9031MNXIA - 1GbE Automotive Ethernet PHY | Microchip

MPN: KSZ9031MNXIA ✓ সক্রিয়
10BASE-T, 100BASE-TX, and 1000BASE-T Rds(on) 64-pin QFN, 8 mm x 8 mm Package 10 Mb/s, 100 Mb/s, and 1000 Mb/s Speed
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

KSZ9031MNXIA সারাংশ

The Microchip Technology KSZ9031MNXIA is an automotive-qualified, fully integrated triple-speed Ethernet physical layer transceiver supporting 10BASE-T, 100BASE-TX, and 1000BASE-T operation. It is offered in a 64-pin QFN package measuring 8 mm by 8 mm and includes LinkMD cable diagnostics for identifying common wiring faults. The KSZ9031 family provides one Ethernet PHY channel and is designed for automotive network infrastructure requiring both Gigabit Ethernet throughput and diagnostic visibility.

An Ethernet PHY is the physical-layer interface between a digital network controller or processor and twisted-pair cabling. It converts digital data into electrical signaling for transmission and converts received signals back into digital data for the host controller. Within the Ethernet hierarchy, the KSZ9031MNXIA belongs to the Ethernet physical layer transceiver category, operating below the MAC and network-interface layers while supporting standard CAT-5 unshielded twisted-pair cabling.

The device combines 10 Mb/s, 100 Mb/s, and 1000 Mb/s capability in one transceiver. Triple-speed support allows the same physical layer to interoperate with legacy 10 Mb/s equipment, Fast Ethernet networks, and Gigabit Ethernet infrastructure. LinkMD adds cable diagnostics that help system integrators identify opens, shorts, and wiring errors, reducing installation time and field maintenance effort. The manufacturer identifies the KSZ9031 as automotive qualified and highlights LinkMD as a principal product feature.

KSZ9031MNXIA integrates the analog PHY functions needed for bidirectional communication over standard twisted-pair media. Automotive implementations commonly place the PHY close to the connector and route controlled-impedance traces to the Ethernet magnetics, while the digital management interface connects it to an automotive-capable Ethernet controller. Keeping the high-frequency analog section separated from switching and processor circuitry helps reduce susceptibility to common-mode interference and digital crosstalk.

Typical deployments include automotive infotainment and connectivity domains, in-vehicle Ethernet backbones, vehicle-to-vehicle communication gateways, industrial Ethernet equipment, and other embedded network nodes. Gigabit capability is useful where bandwidth requirements exceed Fast Ethernet limits, while backward compatibility allows connection to lower-speed infrastructure during fleet transitions. Automotive qualification should be confirmed against the exact ordering code and system-level requirements before release.

PCB implementation requires careful separation between the Ethernet magnetics, differential pairs, clock circuitry, supply decoupling, and digital control signals. Follow the manufacturer datasheet for the exact 64-QFN pad layout, exposed-pad connection, component values, isolation spacing, and reference circuit. In particular, do not infer pin functions from the package drawing alone; use the datasheet pin-description table when assigning tracks or reviewing a PCB revision.

This page organizes the manufacturer product information, package characteristics, sourcing guidance, application considerations, and verified drop-in comparison options into one engineering-focused reference. It also highlights the differences between bond-wire ordering variants so engineers can distinguish mechanical interchangeability from material and qualification decisions.

এর জন্য ড্রপ-ইন বিকল্প KSZ9031MNXIA — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible KSZ9031MNXIA (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Product Type.

Microchip Technology
Package: 48-QFN, 7x7 mm
Product Type: Automotive Ethernet physical-layer transceiver
এর সাথে তুলনা করুন KSZ9031MNXIA →
Microchip Technology
Package: 64-pin QFN
Product Type: Triple-speed Ethernet physical-layer transceiver
এর সাথে তুলনা করুন KSZ9031MNXIA →

KSZ9031MNXIC

✅ ড্রপ-ইন
Microchip Technology
📦 64-QFN (8 mm x 8 mm)
10 Mb/s, 100 Mb/s, and 1000 Mb/s · 10Base-T, 100Base-TX, and 1000Base-T · CAT-5 unshielded twisted-pair cable · Triple-speed Ethernet physical-layer transceiver · GMII/MII · Automotive qualified · LinkMD · Supported

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

KSZ9031MNXIA বিশেষণ

Product Type Integrated Ethernet physical layer transceiver
Ethernet Speed Support 10 Mb/s, 100 Mb/s, and 1000 Mb/s
Number of PHY Channels 1 channel
Supported Standards 10BASE-T, 100BASE-TX, and 1000BASE-T
Medium CAT-5 unshielded twisted-pair cable
Cable Diagnostics LinkMD
Automotive Qualification Automotive qualified
প্যাকেজ 64-pin QFN, 8 mm x 8 mm
মাউন্টিং টাইপ Surface mount
পিনের সংখ্যা 64 pins
Maximum Data Rate 1 Gb/s
Media Interface Integrated differential Ethernet PHY

KSZ9031MNXIA 64-pin qfn, 8 mm x 8 mm পিন কনফিগারেশন গাইড

KSZ9031MNXIA (64-pin qfn, 8 mm x 8 mm প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

KSZ9031MNXIA-এর জন্য 64-pin qfn, 8 mm x 8 mm প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি KSZ9031MNXIA.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

KSZ9031MNXIA এর জন্য উপযুক্ত 3 অ্যাপ্লিকেশনs: এমবেডেড সিস্টেম, IoT ডিভাইস, ইন্ডাস্ট্রিয়াল কন্ট্রোল.

🧩

এমবেডেড সিস্টেম

KSZ9031MNXIA ব্যবহার করে এমবেডেড অ্যাপ্লিকেশনে কোর প্রসেসিং।

🌐

IoT ডিভাইস

KSZ9031MNXIA দ্বারা চালিত স্মার্ট সংযুক্ত ডিভাইস।

🏭

ইন্ডাস্ট্রিয়াল কন্ট্রোল

KSZ9031MNXIA ব্যবহার করে অটোমেশন ও কন্ট্রোল সিস্টেম।

What is the KSZ9031MNXIA?
The KSZ9031MNXIA is a Microchip Technology integrated triple-speed Ethernet PHY supporting 10BASE-T, 100BASE-TX, and 1000BASE-T communication over standard CAT-5 unshielded twisted-pair cable. According to the Microchip KSZ9031 product page, it is automotive qualified and includes LinkMD cable diagnostics. The device is supplied in a 64-pin, 8 mm by 8 mm QFN package for surface-mounted automotive and industrial Ethernet designs.
What are the key specifications of KSZ9031MNXIA that engineers should know?
The KSZ9031MNXIA provides one triple-speed Ethernet PHY channel with support for 10 Mb/s, 100 Mb/s, and 1 Gb/s operation. Its package is a 64-pin QFN measuring 8 mm by 8 mm, while LinkMD supplies cable-fault diagnostics and automotive qualification supports vehicle networking use. According to the Microchip KSZ9031 product page, these functions are integrated into one physical-layer transceiver for standard CAT-5 twisted-pair media.
What Ethernet speeds does KSZ9031MNXIA support?
The KSZ9031MNXIA supports 10BASE-T, 100BASE-TX, and 1000BASE-T operation in one transceiver. According to the manufacturer product page, this triple-speed capability covers 10 Mb/s, 100 Mb/s, and 1 Gb/s Ethernet links. This makes the device suitable for automotive networks that may contain both legacy and Gigabit Ethernet nodes, subject to the speed limits of the connected controller, magnetics, cable, and network infrastructure.
Is the KSZ9031MNXIA suitable for automotive Ethernet?
Yes, the KSZ9031 is identified by Microchip Technology as an automotive-qualified triple-speed Ethernet PHY. The device supports 10BASE-T, 100BASE-TX, and 1000BASE-T and is available in the KSZ9031MNXIA 64-QFN ordering configuration. Before production use, confirm the exact ordering code, operating-temperature grade, AEC-Q100 classification, and automotive qualification record against the manufacturer datasheet for the released design.
Where can I download the KSZ9031MNXIA datasheet PDF?
The official datasheet is available through the Microchip KSZ9031 product page at https://www.microchip.com/en-us/product/KSZ9031. From that page, open the Documentation section and select the KSZ9031 datasheet. Use the manufacturer PDF for the complete electrical characteristics, 64-QFN pin-description table, reference circuit, layout guidance, and ordering information rather than relying on secondary catalog summaries for implementation details.
Where can I find the KSZ9031MNXIA pinout?
The KSZ9031MNXIA pinout is defined in the pin-description table of the Microchip KSZ9031 datasheet and corresponds to its 64-pin QFN package. Assign PCB tracks from that table and the associated land-pattern drawing. The package is 8 mm by 8 mm and includes an exposed thermal pad that must be connected according to the recommended footprint and layout instructions; verify every net against the exact ordering code.
What does LinkMD provide on the KSZ9031MNXIA?
LinkMD provides cable diagnostics that help identify common twisted-pair wiring faults. According to the Microchip KSZ9031 product page, LinkMD is a principal feature of this automotive Ethernet PHY. The diagnostics can support commissioning and fault isolation by evaluating cable conditions through the PHY, but the system should still include the required magnetics, termination network, test access, and host-controller procedures specified by the manufacturer.
What can replace KSZ9031MNXIA?
KSZ9031MNXIC is the closest documented drop-in alternative because Microchip states that the only difference from KSZ9031MNXIA is the bonding-wire material: copper instead of gold. Both use the same functional ordering family and package arrangement, and Microchip reports equivalent long-term reliability after burn-in testing of the copper-wire package. Procurement and engineering teams should still verify markings, qualification records, and traceability before approving a substitution.
Is KSZ9031MNXIA the same as KSZ9031MNXIC?
KSZ9031MNXIA and KSZ9031MNXIC provide the same electrical function, but their bonding-wire materials differ. According to Microchip support documentation, KSZ9031MNXIA uses traditional gold bonding wire while KSZ9031MNXIC uses copper bonding wire. Microchip states that long-term reliability is the same and that burn-in testing has been performed on the copper-wire package, with the traditional gold-wire version preferred when longevity is the primary concern.
When should I choose KSZ9031MNXIA over KSZ9031MNXIC?
Choose KSZ9031MNXIA when traditional gold bonding wire is preferred for procurement consistency, traceability, or an established automotive supply arrangement. Choose KSZ9031MNXIC when copper bonding wire is acceptable and cost or sourcing flexibility is important. Microchip states that both versions have the same long-term reliability and that the copper-wire version has undergone burn-in testing, but the exact qualification and customer requirements should determine the final selection.
What is the best drop-in replacement for KSZ9031MNXIA?
The best documented drop-in replacement is KSZ9031MNXIC because Microchip identifies bonding-wire material as the only functional distinction between the two ordering codes. The replacement retains the KSZ9031 Ethernet PHY architecture and 64-QFN package arrangement while changing from gold to copper bonding wire. Microchip reports equivalent long-term reliability and completed burn-in testing for the copper-wire construction, making it suitable for evaluation when cost or availability drives the change.
What is the difference between KSZ9031MNXIA and KSZ9031RNXIA?
The comparison between KSZ9031MNXIA and KSZ9031RNXIA is published by ETEI, but the accessible result does not expose a complete numeric parameter table or confirm pin-level interchangeability. Both are identified as KSZ9031-family Ethernet PHYs, yet the ordering-code and qualification differences must be checked in the Microchip datasheet. Do not treat them as interchangeable solely because they share the family name; verify the package, electrical ratings, temperature grade, and automotive qualification.
Where can I buy KSZ9031MNXIA online?
Use the Request a Quote form on this page to request KSZ9031MNXIA pricing, stock confirmation, and lead time for the exact 64-QFN ordering code. The form allows purchasers to specify required quantities and packaging without relying on stale catalog figures. For technical validation, retain the official Microchip KSZ9031 product page as the authoritative source for product status, documentation, and qualification information.
What is the price of KSZ9031MNXIA?
The current KSZ9031MNXIA price is generated through the Request a Quote form on this page rather than stated as a static figure. Submit the exact MPN, required quantity, and shipment destination to obtain a current quotation and stock confirmation. This approach also helps distinguish the standard M ordering configuration from tape-and-reel or other packaging options that may be represented by separate manufacturer suffixes.
What is the lead time and stock status for KSZ9031MNXIA?
Current stock, minimum order quantity, and lead time for KSZ9031MNXIA should be confirmed through the Request a Quote form on this page. Quote requests can include the exact MPN, annual and prototype quantities, target delivery date, and packaging preference. Microchip’s KSZ9031 product page remains the appropriate reference for lifecycle information and product documentation, while the quotation workflow provides time-sensitive commercial information.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা KSZ9031MNXIA — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose KSZ9031MNXIA when your automotive Ethernet design requires the established gold bonding-wire version and supply-chain traceability is important. It integrates 10BASE-T, 100BASE-TX, and 1000BASE-T operation with LinkMD diagnostics in a 64-QFN package, making it appropriate for backbone, infotainment, connectivity, and gateway nodes. Choose KSZ9031MNXIC when copper bonding wire is acceptable and the goal is to improve cost or sourcing flexibility; Microchip states that the two versions differ only in bonding-wire material and have the same long-term reliability after testing. Neither ordering code should replace another without checking the exact qualification record, customer traceability rules, and approved-vendor list. The other KSZ9031 ordering codes require separate package, grade, and qualification review rather than an assumption of drop-in equivalence.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য KSZ9031MNXIC
Brand Microchip Technology Microchip Technology
Package 64-QFN (8 mm x 8 mm) 64-QFN (8 mm x 8 mm)
Ethernet Speeds 10BASE-T, 100BASE-TX, 1000BASE-T 10BASE-T, 100BASE-TX, 1000BASE-T
Maximum Data Rate 1 Gb/s 1 Gb/s
PHY Channels 1 channel 1 channel
Cable Diagnostics LinkMD LinkMD
Cable Medium CAT-5 unshielded twisted-pair cable CAT-5 unshielded twisted-pair cable
Bonding Wire Gold Copper
Automotive Qualification Qualified Same functional ordering family; verify exact qualification record

মূল পার্থক্যসমূহ

  • Gold bonding-wire construction in the primary ordering code (বনামKSZ9031MNXIC)
  • Integrated diagnostic support (বনামKSZ9031MNXIC)
  • Single-package automotive Ethernet connectivity (বনামKSZ9031MNXIC)

ডিজাইন নোট

Place the PHY and its supporting clock and decoupling network in the same uninterrupted Ethernet analog section of the PCB. Follow the manufacturer reference layout for every decoupling capacitor, including the placement and connection of the 64-QFN exposed pad. Keep the Ethernet differential pairs short, continuous, and symmetrical, with their return path over a continuous reference plane. Avoid routing digital, switching, and high-current supply paths beneath the PHY or magnetics area.

Use the manufacturer-recommended differential impedance and pair-length geometry for both copper and fiber media interfaces connected to the Ethernet magnetics. Keep the 100BASE-TX and 1000BASE-T paths away from switching-node edges and high-current inductors. Maintain the specified isolation around the magnetics and line-driver circuitry because automotive environments combine high-energy transient events with long cable runs. Validate the complete channel with eye diagrams and compliance testing before production release.

Do not treat KSZ9031MNXIA and KSZ9031MNXIC as automatically approved for every vehicle program solely because their documented difference is bonding-wire material. Review the exact ordering information, AEC-Q100 status, temperature grade, traceability requirements, and customer-specific qualification rules. Microchip reports equal long-term reliability and burn-in testing for the copper-wire construction, but procurement approval and change-control documentation remain necessary for an automotive substitution.

Use the exposed pad as the primary thermal path and follow the manufacturer’s thermal-layout and paste-application guidance. Estimate junction temperature from actual switching loss, ambient conditions, board copper area, and the thermal resistance associated with the selected PCB construction. Avoid relying on package body size alone because the 8 mm by 8 mm QFN transfers most heat through its exposed pad and internal vias.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

Microchip identifies the KSZ9031 as automotive qualified. Exact RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations for the KSZ9031MNXIA ordering code should be confirmed in the current manufacturer product documentation.

ডেটা যাচাই করা হয়েছে: 2026-11-14 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

KSZ9031MNXIA datasheet KSZ9031MNXIA pinout KSZ9031MNXIA datasheet pdf KSZ9031MNXIA replacement KSZ9031MNXIA equivalent KSZ9031MNXIA vs KSZ9031MNXIC KSZ9031MNXIA price KSZ9031MNXIA stock KSZ9031 64-QFN footprint KSZ9031 automotive Ethernet PHY KSZ9031MNXIA LinkMD diagnostics KSZ9031MNXIA application circuit

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Microchip Technology KSZ9031MNXIA KSZ9031MNXIC KSZ9031 Ethernet PHY Ethernet physical layer transceiver network interface IC 10BASE-T 100BASE-TX 1000BASE-T Gigabit Ethernet LinkMD CAT-5 unshielded twisted-pair cable 64-QFN QFN package family surface-mount technology automotive Ethernet cable diagnostics bonding wire gold bonding wire copper bonding wire automotive qualification Ethernet magnetics
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন