KSZ9031MNXIA - 1GbE Automotive Ethernet PHY | Microchip
MPN: KSZ9031MNXIA ✓ 啟用中KSZ9031MNXIA 概覽
An Ethernet PHY is the physical-layer interface between a digital network controller or processor and twisted-pair cabling. It converts digital data into electrical signaling for transmission and converts received signals back into digital data for the host controller. Within the Ethernet hierarchy, the KSZ9031MNXIA belongs to the Ethernet physical layer transceiver category, operating below the MAC and network-interface layers while supporting standard CAT-5 unshielded twisted-pair cabling.
The device combines 10 Mb/s, 100 Mb/s, and 1000 Mb/s capability in one transceiver. Triple-speed support allows the same physical layer to interoperate with legacy 10 Mb/s equipment, Fast Ethernet networks, and Gigabit Ethernet infrastructure. LinkMD adds cable diagnostics that help system integrators identify opens, shorts, and wiring errors, reducing installation time and field maintenance effort. The manufacturer identifies the KSZ9031 as automotive qualified and highlights LinkMD as a principal product feature.
KSZ9031MNXIA integrates the analog PHY functions needed for bidirectional communication over standard twisted-pair media. Automotive implementations commonly place the PHY close to the connector and route controlled-impedance traces to the Ethernet magnetics, while the digital management interface connects it to an automotive-capable Ethernet controller. Keeping the high-frequency analog section separated from switching and processor circuitry helps reduce susceptibility to common-mode interference and digital crosstalk.
Typical deployments include automotive infotainment and connectivity domains, in-vehicle Ethernet backbones, vehicle-to-vehicle communication gateways, industrial Ethernet equipment, and other embedded network nodes. Gigabit capability is useful where bandwidth requirements exceed Fast Ethernet limits, while backward compatibility allows connection to lower-speed infrastructure during fleet transitions. Automotive qualification should be confirmed against the exact ordering code and system-level requirements before release.
PCB implementation requires careful separation between the Ethernet magnetics, differential pairs, clock circuitry, supply decoupling, and digital control signals. Follow the manufacturer datasheet for the exact 64-QFN pad layout, exposed-pad connection, component values, isolation spacing, and reference circuit. In particular, do not infer pin functions from the package drawing alone; use the datasheet pin-description table when assigning tracks or reviewing a PCB revision.
This page organizes the manufacturer product information, package characteristics, sourcing guidance, application considerations, and verified drop-in comparison options into one engineering-focused reference. It also highlights the differences between bond-wire ordering variants so engineers can distinguish mechanical interchangeability from material and qualification decisions.
直接替換替代品,適用於 KSZ9031MNXIA — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: KSZ9031MNXIA (相同外形與佔位) — 差異在於 Package, Product Type.
KSZ9031MNXIC
✅ 直接替換聯絡詢價
查看資料表 →KSZ9031MNXIA 規格
| Product Type | Integrated Ethernet physical layer transceiver |
| Ethernet Speed Support | 10 Mb/s, 100 Mb/s, and 1000 Mb/s |
| Number of PHY Channels | 1 channel |
| Supported Standards | 10BASE-T, 100BASE-TX, and 1000BASE-T |
| Medium | CAT-5 unshielded twisted-pair cable |
| Cable Diagnostics | LinkMD |
| Automotive Qualification | Automotive qualified |
| 封裝 | 64-pin QFN, 8 mm x 8 mm |
| 安裝類型 | Surface mount |
| 腳位數 | 64 pins |
| Maximum Data Rate | 1 Gb/s |
| Media Interface | Integrated differential Ethernet PHY |
KSZ9031MNXIA 64-pin qfn, 8 mm x 8 mm 腳位配置指南
KSZ9031MNXIA(64-pin qfn, 8 mm x 8 mm 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: KSZ9031MNXIA.
請參閱 資料表 以查看完整腳位配置。
典型應用
KSZ9031MNXIA 適用於 3 應用s: 嵌入式系統, IoT 裝置, 工業控制.
嵌入式系統
使用 KSZ9031MNXIA 於嵌入式應用中進行核心處理。
IoT 裝置
由 KSZ9031MNXIA 驅動的智慧連網裝置。
工業控制
使用 KSZ9031MNXIA 的自動化與控制系統。
工程參考資料,適用於 KSZ9031MNXIA — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | KSZ9031MNXIC |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 64-QFN (8 mm x 8 mm) | 64-QFN (8 mm x 8 mm) |
| Ethernet Speeds | 10BASE-T, 100BASE-TX, 1000BASE-T | 10BASE-T, 100BASE-TX, 1000BASE-T |
| Maximum Data Rate | 1 Gb/s | 1 Gb/s |
| PHY Channels | 1 channel | 1 channel |
| Cable Diagnostics | LinkMD | LinkMD |
| Cable Medium | CAT-5 unshielded twisted-pair cable | CAT-5 unshielded twisted-pair cable |
| Bonding Wire | Gold | Copper |
| Automotive Qualification | Qualified | Same functional ordering family; verify exact qualification record |
主要差異化特點
- Gold bonding-wire construction in the primary ordering code (對比KSZ9031MNXIC)
- Integrated diagnostic support (對比KSZ9031MNXIC)
- Single-package automotive Ethernet connectivity (對比KSZ9031MNXIC)
設計說明
Place the PHY and its supporting clock and decoupling network in the same uninterrupted Ethernet analog section of the PCB. Follow the manufacturer reference layout for every decoupling capacitor, including the placement and connection of the 64-QFN exposed pad. Keep the Ethernet differential pairs short, continuous, and symmetrical, with their return path over a continuous reference plane. Avoid routing digital, switching, and high-current supply paths beneath the PHY or magnetics area.
Use the manufacturer-recommended differential impedance and pair-length geometry for both copper and fiber media interfaces connected to the Ethernet magnetics. Keep the 100BASE-TX and 1000BASE-T paths away from switching-node edges and high-current inductors. Maintain the specified isolation around the magnetics and line-driver circuitry because automotive environments combine high-energy transient events with long cable runs. Validate the complete channel with eye diagrams and compliance testing before production release.
Do not treat KSZ9031MNXIA and KSZ9031MNXIC as automatically approved for every vehicle program solely because their documented difference is bonding-wire material. Review the exact ordering information, AEC-Q100 status, temperature grade, traceability requirements, and customer-specific qualification rules. Microchip reports equal long-term reliability and burn-in testing for the copper-wire construction, but procurement approval and change-control documentation remain necessary for an automotive substitution.
Use the exposed pad as the primary thermal path and follow the manufacturer’s thermal-layout and paste-application guidance. Estimate junction temperature from actual switching loss, ambient conditions, board copper area, and the thermal resistance associated with the selected PCB construction. Avoid relying on package body size alone because the 8 mm by 8 mm QFN transfers most heat through its exposed pad and internal vias.
合規資訊
Microchip identifies the KSZ9031 as automotive qualified. Exact RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations for the KSZ9031MNXIA ordering code should be confirmed in the current manufacturer product documentation.