KSZ9031MNXIA - 1GbE Automotive Ethernet PHY | Microchip
MPN: KSZ9031MNXIA ✓ Hoạt độngKSZ9031MNXIA Tóm tắt
An Ethernet PHY is the physical-layer interface between a digital network controller or processor and twisted-pair cabling. It converts digital data into electrical signaling for transmission and converts received signals back into digital data for the host controller. Within the Ethernet hierarchy, the KSZ9031MNXIA belongs to the Ethernet physical layer transceiver category, operating below the MAC and network-interface layers while supporting standard CAT-5 unshielded twisted-pair cabling.
The device combines 10 Mb/s, 100 Mb/s, and 1000 Mb/s capability in one transceiver. Triple-speed support allows the same physical layer to interoperate with legacy 10 Mb/s equipment, Fast Ethernet networks, and Gigabit Ethernet infrastructure. LinkMD adds cable diagnostics that help system integrators identify opens, shorts, and wiring errors, reducing installation time and field maintenance effort. The manufacturer identifies the KSZ9031 as automotive qualified and highlights LinkMD as a principal product feature.
KSZ9031MNXIA integrates the analog PHY functions needed for bidirectional communication over standard twisted-pair media. Automotive implementations commonly place the PHY close to the connector and route controlled-impedance traces to the Ethernet magnetics, while the digital management interface connects it to an automotive-capable Ethernet controller. Keeping the high-frequency analog section separated from switching and processor circuitry helps reduce susceptibility to common-mode interference and digital crosstalk.
Typical deployments include automotive infotainment and connectivity domains, in-vehicle Ethernet backbones, vehicle-to-vehicle communication gateways, industrial Ethernet equipment, and other embedded network nodes. Gigabit capability is useful where bandwidth requirements exceed Fast Ethernet limits, while backward compatibility allows connection to lower-speed infrastructure during fleet transitions. Automotive qualification should be confirmed against the exact ordering code and system-level requirements before release.
PCB implementation requires careful separation between the Ethernet magnetics, differential pairs, clock circuitry, supply decoupling, and digital control signals. Follow the manufacturer datasheet for the exact 64-QFN pad layout, exposed-pad connection, component values, isolation spacing, and reference circuit. In particular, do not infer pin functions from the package drawing alone; use the datasheet pin-description table when assigning tracks or reviewing a PCB revision.
This page organizes the manufacturer product information, package characteristics, sourcing guidance, application considerations, and verified drop-in comparison options into one engineering-focused reference. It also highlights the differences between bond-wire ordering variants so engineers can distinguish mechanical interchangeability from material and qualification decisions.
Bộ thay thế dễ dàng lắp đặt cho KSZ9031MNXIA — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với KSZ9031MNXIA (cùng hình factor và footprint) — khác nhau ở Package, Product Type.
KSZ9031MNXIC
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →KSZ9031MNXIA Thông số kỹ thuật
| Product Type | Integrated Ethernet physical layer transceiver |
| Ethernet Speed Support | 10 Mb/s, 100 Mb/s, and 1000 Mb/s |
| Number of PHY Channels | 1 channel |
| Supported Standards | 10BASE-T, 100BASE-TX, and 1000BASE-T |
| Medium | CAT-5 unshielded twisted-pair cable |
| Cable Diagnostics | LinkMD |
| Automotive Qualification | Automotive qualified |
| Hộp | 64-pin QFN, 8 mm x 8 mm |
| Kiểu lắp đặt | Surface mount |
| Số lượng chân | 64 pins |
| Maximum Data Rate | 1 Gb/s |
| Media Interface | Integrated differential Ethernet PHY |
Hướng dẫn cấu hình chân KSZ9031MNXIA 64-pin qfn, 8 mm x 8 mm
Cấu hình chân cho KSZ9031MNXIA (64-pin qfn, 8 mm x 8 mm gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho KSZ9031MNXIA.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
KSZ9031MNXIA phù hợp cho 3 Áp dụngs: Hệ thống tích hợp, Máy thiết bị IoT, Điều khiển công nghiệp.
Hệ thống tích hợp
Xử lý trung tâm trong các ứng dụng tích hợp sử dụng KSZ9031MNXIA.
Máy thiết bị IoT
Máy thiết bị kết nối thông minh được cung cấp bởi KSZ9031MNXIA.
Điều khiển công nghiệp
Hệ thống tự động hóa và điều khiển sử dụng KSZ9031MNXIA.
Dữ liệu tham khảo kỹ thuật cho KSZ9031MNXIA — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | KSZ9031MNXIC |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 64-QFN (8 mm x 8 mm) | 64-QFN (8 mm x 8 mm) |
| Ethernet Speeds | 10BASE-T, 100BASE-TX, 1000BASE-T | 10BASE-T, 100BASE-TX, 1000BASE-T |
| Maximum Data Rate | 1 Gb/s | 1 Gb/s |
| PHY Channels | 1 channel | 1 channel |
| Cable Diagnostics | LinkMD | LinkMD |
| Cable Medium | CAT-5 unshielded twisted-pair cable | CAT-5 unshielded twisted-pair cable |
| Bonding Wire | Gold | Copper |
| Automotive Qualification | Qualified | Same functional ordering family; verify exact qualification record |
Bảo phân biệt quan trọng
- Gold bonding-wire construction in the primary ordering code (vsKSZ9031MNXIC)
- Integrated diagnostic support (vsKSZ9031MNXIC)
- Single-package automotive Ethernet connectivity (vsKSZ9031MNXIC)
Ghi chú thiết kế
Place the PHY and its supporting clock and decoupling network in the same uninterrupted Ethernet analog section of the PCB. Follow the manufacturer reference layout for every decoupling capacitor, including the placement and connection of the 64-QFN exposed pad. Keep the Ethernet differential pairs short, continuous, and symmetrical, with their return path over a continuous reference plane. Avoid routing digital, switching, and high-current supply paths beneath the PHY or magnetics area.
Use the manufacturer-recommended differential impedance and pair-length geometry for both copper and fiber media interfaces connected to the Ethernet magnetics. Keep the 100BASE-TX and 1000BASE-T paths away from switching-node edges and high-current inductors. Maintain the specified isolation around the magnetics and line-driver circuitry because automotive environments combine high-energy transient events with long cable runs. Validate the complete channel with eye diagrams and compliance testing before production release.
Do not treat KSZ9031MNXIA and KSZ9031MNXIC as automatically approved for every vehicle program solely because their documented difference is bonding-wire material. Review the exact ordering information, AEC-Q100 status, temperature grade, traceability requirements, and customer-specific qualification rules. Microchip reports equal long-term reliability and burn-in testing for the copper-wire construction, but procurement approval and change-control documentation remain necessary for an automotive substitution.
Use the exposed pad as the primary thermal path and follow the manufacturer’s thermal-layout and paste-application guidance. Estimate junction temperature from actual switching loss, ambient conditions, board copper area, and the thermal resistance associated with the selected PCB construction. Avoid relying on package body size alone because the 8 mm by 8 mm QFN transfers most heat through its exposed pad and internal vias.
Thông tin tuân thủ
Microchip identifies the KSZ9031 as automotive qualified. Exact RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations for the KSZ9031MNXIA ordering code should be confirmed in the current manufacturer product documentation.