Texas Instruments

LM2902KVQDRG4 - Quad 30V 1.2MHz Op Amp | Texas Instruments

MPN: LM2902KVQDRG4 ✓ সক্রিয়
30 V Vdss 20 nA Id 14-pin SOIC (D) Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

LM2902KVQDRG4 সারাংশ

The Texas Instruments LM2902KVQDRG4 is a general-purpose quad operational amplifier with four independent amplifier channels, a 30 V maximum supply rating, 1.2 MHz gain-bandwidth product, and improved 2 kV ESD protection. The device is packaged in a 14-pin SOIC (D) and is specified for operation from -40°C to 125°C. Its combination of four amplifiers, wide supply capability, and low cost makes it suitable for space-constrained analog signal-conditioning systems.

An operational amplifier is an analog amplifier that uses very high open-loop gain to amplify the difference between two input voltages. Within the broader semiconductor hierarchy, the LM2902KV is an amplifier IC, a linear operational amplifier, and a general-purpose precision signal-conditioning component. Multiple amplifiers can process independent channels or be configured together for instrumentation, filtering, buffering, comparison, or gain-control functions.

The key operating characteristics include a 1.2 MHz gain-bandwidth product and a slew rate of 0.5 V/µs. The input bias current is listed as low as 20 nA. Improved 2 kV ESD protection helps improve tolerance of electrostatic discharge encountered during handling or field use. The automotive-qualified grade is identified for automotive applications, while the extended 125°C upper operating temperature supports industrial and automotive environments.

The LM2902KV architecture uses four independent operational-amplifier channels in one package, reducing board area compared with four separate single or dual amplifier packages. Because each channel can operate from the same supply rails, the device can support common-mode input ranges close to the supply limits and can be used with single or split-supply arrangements, subject to the detailed operating limits in the manufacturer datasheet.

Typical applications include current-loop and voltage-loop signal conditioning, industrial sensor interfaces, automotive electronics, audio and communication equipment, active filtering, transducers, and general-purpose analog boards. The quad arrangement is particularly useful when four similar channels are required, such as in four-channel sensor acquisition, comparator-style threshold circuits, or multiple amplifier stages distributed across one assembly.

PCB design should account for input bias currents, output drive capability, supply decoupling, and the stability of each feedback network. Place the supply bypass capacitor close to the device supply pins, route sensitive input and feedback traces away from switching nodes, and use resistive networks that preserve the amplifier's intended bias-current balance. The 14-pin SOIC footprint simplifies hand assembly and automated surface-mount production.

This page combines the exact device identity, verified technical characteristics, application guidance, drop-in alternatives, and package-focused design considerations to support component selection and PCB planning. It also distinguishes directly interchangeable 14-pin parts from options that require closer electrical review.

এর জন্য ড্রপ-ইন বিকল্প LM2902KVQDRG4 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible LM2902KVQDRG4 (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Maximum Supply Voltage, Supply Configuration, Amplifier Type, Operating Temperature Range.

Texas Instruments
Package: 14-SOIC
Maximum Supply Voltage: 26 V
Supply Configuration: Single supply or split supply
এর সাথে তুলনা করুন LM2902KVQDRG4 →
onsemi
Package: 14-pin SOIC
Maximum Supply Voltage: 36 V
Supply Configuration: Single-supply or split-supply operation
এর সাথে তুলনা করুন LM2902KVQDRG4 →
onsemi
Package: 14-pin SOP
Maximum Supply Voltage: 26 V
Operating Temperature Range: -40 °C to +85 °C
এর সাথে তুলনা করুন LM2902KVQDRG4 →
Texas Instruments
Package: 14-SOIC, 3.90 mm width
Maximum Supply Voltage: 26 V
Supply Configuration: Single or dual supply

LM2902M

✅ ড্রপ-ইন
onsemi
📦 14-pin SOIC (D)
Quad operational amplifier · 4 circuits · 26 V · 1.2 MHz · 2 mV · Standard general-purpose amplifier · Internal frequency compensation · 4 independent amplifiers

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LM2902M/NOPB

✅ ড্রপ-ইন
Texas Instruments
📦 14-pin SOIC (D)
4 circuits · General purpose · 26 V · 1.2 MHz · 2 mV · 14-SOIC, 3.90 mm width · -40 °C to +85 °C · 0.5 V/µs

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LM2902B

✅ ড্রপ-ইন
📦 14-pin SOIC (D)
Same four-channel 14-pin SOIC architecture; the LM2902B family supports up to 36 V, 20% above the LM2902KV's 30 V maximum rating, while legacy LM2902 versions are drop-in compatible according to TI.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

LM2902DR

✅ ড্রপ-ইন
Texas Instruments
📦 14-pin SOIC (D)
Quad operational amplifier · 4 · 26 V · 1.2 MHz · 2 mV · Single supply or split supply · Push-pull

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LM2902DR

✅ ড্রপ-ইন
Texas Instruments
📦 14-pin SOIC (D)
Quad operational amplifier · 4 · 26 V · 1.2 MHz · 2 mV · Single supply or split supply · Push-pull

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LM2902DR

✅ ড্রপ-ইন
Texas Instruments
📦 14-pin SOIC (D)
Quad operational amplifier · 4 · 26 V · 1.2 MHz · 2 mV · Single supply or split supply · Push-pull

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LM2902KVQDRG4 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Amplifier Type Quad general-purpose operational amplifier
Number of Channels 4 channels
Maximum Supply Voltage 30 V
Gain-Bandwidth Product 1.2 MHz
Slew Rate 0.5 V/µs
Minimum Input Bias Current 20 nA
ESD Protection 2 kV
অপারেটিং তাপমাত্রার পরিসর -40°C to 125°C
প্যাকেজ 14-pin SOIC (D)
মাউন্টিং টাইপ Surface mount
Automotive Qualification AEC-Q100 qualified
Total Number of Pins 14 pins

LM2902KVQDRG4 14-pin soic (d) পিন কনফিগারেশন গাইড

LM2902KVQDRG4 (14-pin soic (d) প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।

LM2902KVQDRG4-এর জন্য 14-pin soic (d) প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি LM2902KVQDRG4.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

LM2902KVQDRG4 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Sensor Signal Conditioning, Automotive Low-Speed Analog Control, Active Filtering and Gain Control, Audio and Communication Buffers, Data Acquisition Front End, Power Supply Monitoring.

🏭

Industrial Sensor Signal Conditioning

The LM2902KVQDRG4 fits four-channel industrial sensor conditioning because it combines four independent amplifiers, a 1.2 MHz gain-bandwidth product, and operation from -40°C to 125°C. Each channel can provide gain, buffering, inversion, or active filtering around a sensor signal without requiring four separate amplifier packages. The 30 V supply rating also supports headroom for industrial interfaces. Designers should verify the input common-mode range, output swing, and offset requirements for the selected sensor, then use short input paths and balanced feedback resistors to reduce bias-current error.

🚗

Automotive Low-Speed Analog Control

The LM2902KVQDRG4 is suitable for automotive low-speed analog control because it is identified as AEC-Q100 qualified and operates across -40°C to 125°C. Four channels can support actuator conditioning, sensor interfaces, voltage comparison, or low-bandwidth feedback loops in one 14-pin SOIC. Its 2 kV ESD protection is useful in automotive environments, while the 1.2 MHz gain-bandwidth product covers general-purpose control tasks rather than demanding high-speed signal processing. Validate the complete automotive bill of materials, fault conditions, and production qualification status.

🔧

Active Filtering and Gain Control

The LM2902KVQDRG4 can implement active filters or cascaded gain stages where four repeatable amplifier channels provide useful board-area savings. Its 1.2 MHz gain-bandwidth product and 0.5 V/µs slew rate support low-frequency filtering, transconductance conversion, and moderate-bandwidth closed-loop amplifiers. Component tolerances, the op-amp's gain-bandwidth response, and capacitive loading determine usable bandwidth. Keep each feedback loop compact and place filter capacitors close to their associated nodes to reduce parasitic effects and oscillation risk.

🌐

Audio and Communication Buffers

The LM2902KVQDRG4 is suitable for audio and communication boards requiring four general-purpose buffers or gain stages at moderate frequency. The 1.2 MHz gain-bandwidth product is appropriate for many control, interface, and low-frequency audio paths, while the 0.5 V/µs slew rate reduces distortion risk when driving moderate capacitive and resistive loads. Verify output-current and output-swing limits for the intended load, avoid excessive capacitive loading, and isolate analog paths from switching converters and high-current digital return paths.

📺

Data Acquisition Front End

A 14-pin quad amplifier can serve as the first analog stage in a multiplexed or multi-channel data-acquisition front end. The LM2902KVQDRG4 provides four channels with a 1.2 MHz gain-bandwidth product, 20 nA minimum input bias current, and a wide -40°C to 125°C operating range. Input offset and bias-current error become important with high-impedance sensors, so the source impedance, feedback resistance, and settling requirements must be calculated together. The device is best suited to moderate-bandwidth acquisition rather than high-speed precision sampling.

⚡

Power Supply Monitoring

The LM2902KVQDRG4 can monitor multiple supply or system voltages by using each amplifier as a buffered comparator against a reference. Its 30 V maximum supply rating provides useful operating headroom for industrial rails, although each input must remain within the specified common-mode range. The four-channel package reduces footprint and component count compared with separate single amplifiers. Design the reference network for accuracy, include hysteresis where appropriate to prevent repeated switching, and check output behavior during startup and supply transients.

What is the LM2902KVQDRG4?
The LM2902KVQDRG4 is a Texas Instruments quad general-purpose operational amplifier with four independent channels, a 30 V maximum supply rating, and a 1.2 MHz gain-bandwidth product. According to the Texas Instruments LM2902KV product page, it provides improved 2 kV ESD protection and operates from -40°C to 125°C in a 14-pin SOIC package. The four-channel integration reduces board space and component count when an analog system requires four similar amplifier functions.
What are the key specifications of LM2902KVQDRG4?
The key LM2902KVQDRG4 specifications are four amplifier channels, a 30 V maximum supply rating, 1.2 MHz gain-bandwidth product, 0.5 V/µs slew rate, 20 nA minimum input bias current, and 2 kV ESD protection. The Texas Instruments product page identifies a -40°C to 125°C operating range and a 14-pin SOIC (D) package. These characteristics place the device in the general-purpose, high-voltage amplifier class for industrial, automotive, and analog signal-conditioning designs.
Where can I download the LM2902KVQDRG4 datasheet PDF?
The official LM2902KVQDRG4 datasheet is accessed through the Texas Instruments LM2902KV product page at https://www.ti.com/product/LM2902KV. The ordering-information link for LM2902KVQDRG4 is https://www.ti.com/product/LM2902KV/part-details/LM2902KVQDRG4. Use the manufacturer document for the exact pin description, electrical limits, test conditions, application examples, and ordering information associated with the 14-pin SOIC configuration.
Where can I find the LM2902KVQDRG4 pinout?
The LM2902KVQDRG4 pinout is published in the pin-configuration section of the Texas Instruments LM2902KV manufacturer datasheet. The exact ordered MPN uses the 14-pin SOIC (D) package, confirmed by the Texas Instruments part-details page. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks, especially because the SOIC numbering follows the package's counter-clockwise convention around the body.
Is LM2902KVQDRG4 suitable for automotive applications?
Yes, the LM2902KVQDRG4 is identified as AEC-Q100 qualified for automotive applications. According to the LM2902KV technical information, the device combines a 30 V supply rating, 1.2 MHz gain-bandwidth product, and an operating range of -40°C to 125°C. Automotive qualification supports its use in temperature-tolerant sensing and signal-conditioning circuits, subject to the manufacturer's specified operating and electrical limits.
What is the difference between LM2902KVQDRG4 and LM2902M?
The LM2902KVQDRG4 is the improved 2 kV-ESD, automotive-qualified LM2902KV variant in a 14-pin SOIC, while the LM2902M is an earlier quad 1.2 MHz operational-amplifier offering in the same 14-pin SOIC footprint. A cross-reference comparison identifies LM2902M as functionally similar, but exact offset, bias-current, and qualification differences must be checked in each manufacturer datasheet before treating it as an unqualified production substitute.
When should I choose LM2902KVQDRG4 over LM2902B?
Choose LM2902KVQDRG4 when the design needs its 30 V maximum supply rating, 2 kV ESD protection, AEC-Q100 qualification, and -40°C to 125°C operating range. Choose the LM2902B family when a newer 36 V-capable general-purpose quad amplifier is preferred for additional supply-voltage headroom. Both families offer a 14-pin SOIC option, but their electrical limits and qualification details should be compared before substitution.
What can replace the LM2902KVQDRG4?
The LM2902KVQDRG4 can be replaced by a pin-compatible 14-SOIC quad operational amplifier whose supply rating, gain-bandwidth product, input and output limits, offset voltage, bias current, noise, and temperature qualification meet the circuit requirements. Candidate families include LM2902M, LM2902B, and 14-SOIC LM2902DR devices from STMicroelectronics, onsemi, and NXP. Validate the exact suffix and production requirements against both datasheets.
What is the best NXP equivalent for LM2902KVQDRG4?
The NXP LM2902DR is a candidate quad operational amplifier in a 14-pin SOIC package that can serve as a close functional replacement. It belongs to the LM2902 class, which also provides single-supply or split-supply operation. Final equivalence still depends on package pinout, maximum supply voltage, input common-mode limits, offset voltage, input bias current, output swing, temperature grade, and automotive qualification.
Is LM2902KVQDRG4 the same as an LM2902DR?
The LM2902KVQDRG4 and an LM2902DR are not automatically identical even when both use a 14-pin SOIC. The KV version is specified for a 30 V maximum supply, improved 2 kV ESD protection, AEC-Q100 qualification, and operation to 125°C. An LM2902DR may share the basic amplifier function and pin arrangement, but its electrical limits and qualification can differ, so it should be treated as a cross-reference candidate rather than an automatic equivalent.
Where can I buy LM2902KVQDRG4 online?
Use the Request a Quote form on this page to request LM2902KVQDRG4 availability, order quantities, and current lead time. The exact component is a Texas Instruments quad operational amplifier in a 14-pin SOIC (D) package. A quotation request allows the required suffix, delivery quantity, and date to be confirmed before an order is placed.
What is the price of LM2902KVQDRG4?
The current commercial price for LM2902KVQDRG4 is provided through the Request a Quote form on this page. Submit the required order quantity and packaging preference so the quotation reflects the exact 14-pin SOIC (D) ordering code. The form is the appropriate channel for current pricing because electronic-component pricing can vary with quantity, market conditions, and delivery requirements.
What is the lead time for LM2902KVQDRG4?
Request the current lead time and stock position for LM2902KVQDRG4 through the Request a Quote form on this page. Include the required quantity, target delivery date, and whether the order is for prototype or production use. The Texas Instruments ordering information confirms the exact MPN and 14-pin SOIC configuration for quotation and supply-chain review.
Is LM2902KVQDRG4 in stock?
Current stock for LM2902KVQDRG4 should be confirmed through the Request a Quote form on this page. State the required quantity and delivery schedule so the order can be matched to current inventory or an appropriate supply plan. The part is listed by Texas Instruments as an active ordering option with a 14-pin SOIC (D) package.
What design details matter when using LM2902KVQDRG4 in a sensor interface?
For a sensor interface, account for the LM2902KVQDRG4's 20 nA minimum input bias current, input offset voltage, common-mode range, output swing, and 0.5 V/µs slew rate. Keep input and feedback traces short, avoid routing them beside switching nodes, and use the supply bypass capacitor close to the device. If the source impedance is high, calculate bias-current error and compare it with the sensor's signal amplitude.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা LM2902KVQDRG4 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose LM2902KVQDRG4 when a design needs four general-purpose amplifier channels in a 14-pin SOIC, a 30 V maximum supply rating, specified 2 kV ESD protection, and AEC-Q100 qualification for automotive use. The -40°C to 125°C range also suits industrial equipment with elevated ambient temperatures. Choose LM2902M or LM2902M/NOPB when the basic four-channel, 1.2 MHz, 14-SOIC function is sufficient and the legacy LM2902 electrical characteristics fit the design. Choose LM2902B when additional supply-voltage headroom is valuable because its 36 V rating exceeds the KV device's 30 V limit. STMicroelectronics, onsemi, and NXP LM2902DR parts are candidate cross-brand substitutions, but engineers should compare offset voltage, bias current, common-mode range, output swing, noise, qualification, and production status before approving a drop-in replacement.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য LM2902M LM2902M/NOPB LM2902B LM2902DR LM2902DR
Package 14-pin SOIC (D) 14-pin SOIC (D) 14-pin SOIC (D) 14-pin SOIC (D) 14-pin SOIC (D) 14-pin SOIC (D)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments STMicroelectronics onsemi
Number of Amplifier Channels 4 channels 4 channels 4 channels 4 channels 4 channels 4 channels
Gain-Bandwidth Product 1.2 MHz 1.2 MHz 1.2 MHz 1.2 MHz Approximately 1.2 MHz class Approximately 1.2 MHz class

মূল পার্থক্যসমূহ

  • Specified automotive qualification (বনামLM2902M)
  • Improved ESD capability (বনামLM2902M)
  • Consistent quad integration (বনামLM2902B)
  • Same 14-SOIC footprint across cross-brand candidates (বনামLM2902DR)

ডিজাইন নোট

Do not treat the shared SOIC-14 footprint as proof of automatic equivalence. Before substituting LM2902M, LM2902B, or an LM2902DR, compare maximum supply voltage, input common-mode range, output swing, input offset voltage, bias current, noise, output drive, and temperature qualification. The LM2902KVQDRG4 is rated for 30 V, 2 kV ESD protection, and -40°C to 125°C operation, so a substitute must satisfy all circuit limits rather than only the pin count.

Place the supply bypass capacitor next to the device's supply and ground pins, and keep each amplifier's output, feedback network, and input path compact. High-impedance inputs are especially sensitive to leakage and surface contamination; use guarding where appropriate and avoid routing input traces beside digital switching nodes. Balanced feedback resistors can reduce input-bias-current offset, particularly when the source impedance is high.

Estimated: with a 30 V maximum supply and a typical 15 V output, the maximum power dissipation from the four amplifier channels is governed by the device's quiescent current and output-current dissipation, which are not numerically specified in the available technical summary. Use the manufacturer datasheet's worst-case quiescent current, output-current limit, and thermal information to calculate junction temperature and copper-area requirements before using the SOIC package near its limits.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The device is identified as AEC-Q100 qualified for automotive applications. Other environmental and material compliance attributes are not established by the technical information summarized for this ordering code.

ডেটা যাচাই করা হয়েছে: 2026-11-09 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

LM2902KVQDRG4 LM2902KVQDRG4 datasheet LM2902KVQDRG4 datasheet pdf LM2902KVQDRG4 pinout LM2902KVQDRG4 specifications LM2902KVQDRG4 equivalent LM2902KVQDRG4 replacement LM2902KVQDRG4 cross reference LM2902KVQDRG4 vs LM2902M Texas Instruments LM2902KVQDRG4 LM2902KVQDRG4 SOIC-14 LM2902KVQDRG4 price LM2902KVQDRG4 stock LM2902KVQDRG4 automotive amplifier

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments LM2902KVQDRG4 LM2902KV LM2902M LM2902M/NOPB LM2902B LM2902DR STMicroelectronics onsemi NXP Semiconductors quad operational amplifier general-purpose amplifier linear amplifier amplifier IC semiconductor gain-bandwidth product slew rate input bias current input offset voltage ESD protection AEC-Q100 SOIC-14 SOIC package surface mount industrial sensor interface automotive electronics active filter data acquisition
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন