LM2902KVQDRG4 - Quad 30V 1.2MHz Op Amp | Texas Instruments
MPN: LM2902KVQDRG4 ✓ 啟用中LM2902KVQDRG4 概覽
An operational amplifier is an analog amplifier that uses very high open-loop gain to amplify the difference between two input voltages. Within the broader semiconductor hierarchy, the LM2902KV is an amplifier IC, a linear operational amplifier, and a general-purpose precision signal-conditioning component. Multiple amplifiers can process independent channels or be configured together for instrumentation, filtering, buffering, comparison, or gain-control functions.
The key operating characteristics include a 1.2 MHz gain-bandwidth product and a slew rate of 0.5 V/µs. The input bias current is listed as low as 20 nA. Improved 2 kV ESD protection helps improve tolerance of electrostatic discharge encountered during handling or field use. The automotive-qualified grade is identified for automotive applications, while the extended 125°C upper operating temperature supports industrial and automotive environments.
The LM2902KV architecture uses four independent operational-amplifier channels in one package, reducing board area compared with four separate single or dual amplifier packages. Because each channel can operate from the same supply rails, the device can support common-mode input ranges close to the supply limits and can be used with single or split-supply arrangements, subject to the detailed operating limits in the manufacturer datasheet.
Typical applications include current-loop and voltage-loop signal conditioning, industrial sensor interfaces, automotive electronics, audio and communication equipment, active filtering, transducers, and general-purpose analog boards. The quad arrangement is particularly useful when four similar channels are required, such as in four-channel sensor acquisition, comparator-style threshold circuits, or multiple amplifier stages distributed across one assembly.
PCB design should account for input bias currents, output drive capability, supply decoupling, and the stability of each feedback network. Place the supply bypass capacitor close to the device supply pins, route sensitive input and feedback traces away from switching nodes, and use resistive networks that preserve the amplifier's intended bias-current balance. The 14-pin SOIC footprint simplifies hand assembly and automated surface-mount production.
This page combines the exact device identity, verified technical characteristics, application guidance, drop-in alternatives, and package-focused design considerations to support component selection and PCB planning. It also distinguishes directly interchangeable 14-pin parts from options that require closer electrical review.
直接替換替代品,適用於 LM2902KVQDRG4 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: LM2902KVQDRG4 (相同外形與佔位) — 差異在於 Package, Maximum Supply Voltage, Supply Configuration, Amplifier Type, Operating Temperature Range.
LM2902M
✅ 直接替換聯絡詢價
查看資料表 →LM2902M/NOPB
✅ 直接替換聯絡詢價
查看資料表 →LM2902B
✅ 直接替換📋 參考替代品(不在目錄中)
LM2902DR
✅ 直接替換聯絡詢價
查看資料表 →LM2902KVQDRG4 最大額定值與電氣特性
| Amplifier Type | Quad general-purpose operational amplifier |
| Number of Channels | 4 channels |
| Maximum Supply Voltage | 30 V |
| Gain-Bandwidth Product | 1.2 MHz |
| Slew Rate | 0.5 V/µs |
| Minimum Input Bias Current | 20 nA |
| ESD Protection | 2 kV |
| 工作溫度範圍 | -40°C to 125°C |
| 封裝 | 14-pin SOIC (D) |
| 安裝類型 | Surface mount |
| Automotive Qualification | AEC-Q100 qualified |
| Total Number of Pins | 14 pins |
LM2902KVQDRG4 14-pin soic (d) 腳位配置指南
LM2902KVQDRG4(14-pin soic (d) 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: LM2902KVQDRG4.
請參閱 資料表 以查看完整腳位配置。
典型應用
LM2902KVQDRG4 適用於 6 應用s: Industrial Sensor Signal Conditioning, Automotive Low-Speed Analog Control, Active Filtering and Gain Control, Audio and Communication Buffers, Data Acquisition Front End, Power Supply Monitoring.
Industrial Sensor Signal Conditioning
The LM2902KVQDRG4 fits four-channel industrial sensor conditioning because it combines four independent amplifiers, a 1.2 MHz gain-bandwidth product, and operation from -40°C to 125°C. Each channel can provide gain, buffering, inversion, or active filtering around a sensor signal without requiring four separate amplifier packages. The 30 V supply rating also supports headroom for industrial interfaces. Designers should verify the input common-mode range, output swing, and offset requirements for the selected sensor, then use short input paths and balanced feedback resistors to reduce bias-current error.
推薦
Automotive Low-Speed Analog Control
The LM2902KVQDRG4 is suitable for automotive low-speed analog control because it is identified as AEC-Q100 qualified and operates across -40°C to 125°C. Four channels can support actuator conditioning, sensor interfaces, voltage comparison, or low-bandwidth feedback loops in one 14-pin SOIC. Its 2 kV ESD protection is useful in automotive environments, while the 1.2 MHz gain-bandwidth product covers general-purpose control tasks rather than demanding high-speed signal processing. Validate the complete automotive bill of materials, fault conditions, and production qualification status.
推薦
Active Filtering and Gain Control
The LM2902KVQDRG4 can implement active filters or cascaded gain stages where four repeatable amplifier channels provide useful board-area savings. Its 1.2 MHz gain-bandwidth product and 0.5 V/µs slew rate support low-frequency filtering, transconductance conversion, and moderate-bandwidth closed-loop amplifiers. Component tolerances, the op-amp's gain-bandwidth response, and capacitive loading determine usable bandwidth. Keep each feedback loop compact and place filter capacitors close to their associated nodes to reduce parasitic effects and oscillation risk.
推薦
Audio and Communication Buffers
The LM2902KVQDRG4 is suitable for audio and communication boards requiring four general-purpose buffers or gain stages at moderate frequency. The 1.2 MHz gain-bandwidth product is appropriate for many control, interface, and low-frequency audio paths, while the 0.5 V/µs slew rate reduces distortion risk when driving moderate capacitive and resistive loads. Verify output-current and output-swing limits for the intended load, avoid excessive capacitive loading, and isolate analog paths from switching converters and high-current digital return paths.
推薦
Data Acquisition Front End
A 14-pin quad amplifier can serve as the first analog stage in a multiplexed or multi-channel data-acquisition front end. The LM2902KVQDRG4 provides four channels with a 1.2 MHz gain-bandwidth product, 20 nA minimum input bias current, and a wide -40°C to 125°C operating range. Input offset and bias-current error become important with high-impedance sensors, so the source impedance, feedback resistance, and settling requirements must be calculated together. The device is best suited to moderate-bandwidth acquisition rather than high-speed precision sampling.
推薦
Power Supply Monitoring
The LM2902KVQDRG4 can monitor multiple supply or system voltages by using each amplifier as a buffered comparator against a reference. Its 30 V maximum supply rating provides useful operating headroom for industrial rails, although each input must remain within the specified common-mode range. The four-channel package reduces footprint and component count compared with separate single amplifiers. Design the reference network for accuracy, include hysteresis where appropriate to prevent repeated switching, and check output behavior during startup and supply transients.
推薦
推薦產品摘要
工程參考資料,適用於 LM2902KVQDRG4 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | LM2902M | LM2902M/NOPB | LM2902B | LM2902DR | LM2902DR |
|---|---|---|---|---|---|---|
| Package | 14-pin SOIC (D) | 14-pin SOIC (D) | 14-pin SOIC (D) | 14-pin SOIC (D) | 14-pin SOIC (D) | 14-pin SOIC (D) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | STMicroelectronics | onsemi |
| Number of Amplifier Channels | 4 channels | 4 channels | 4 channels | 4 channels | 4 channels | 4 channels |
| Gain-Bandwidth Product | 1.2 MHz | 1.2 MHz | 1.2 MHz | 1.2 MHz | Approximately 1.2 MHz class | Approximately 1.2 MHz class |
主要差異化特點
- Specified automotive qualification (對比LM2902M)
- Improved ESD capability (對比LM2902M)
- Consistent quad integration (對比LM2902B)
- Same 14-SOIC footprint across cross-brand candidates (對比LM2902DR)
設計說明
Do not treat the shared SOIC-14 footprint as proof of automatic equivalence. Before substituting LM2902M, LM2902B, or an LM2902DR, compare maximum supply voltage, input common-mode range, output swing, input offset voltage, bias current, noise, output drive, and temperature qualification. The LM2902KVQDRG4 is rated for 30 V, 2 kV ESD protection, and -40°C to 125°C operation, so a substitute must satisfy all circuit limits rather than only the pin count.
Place the supply bypass capacitor next to the device's supply and ground pins, and keep each amplifier's output, feedback network, and input path compact. High-impedance inputs are especially sensitive to leakage and surface contamination; use guarding where appropriate and avoid routing input traces beside digital switching nodes. Balanced feedback resistors can reduce input-bias-current offset, particularly when the source impedance is high.
Estimated: with a 30 V maximum supply and a typical 15 V output, the maximum power dissipation from the four amplifier channels is governed by the device's quiescent current and output-current dissipation, which are not numerically specified in the available technical summary. Use the manufacturer datasheet's worst-case quiescent current, output-current limit, and thermal information to calculate junction temperature and copper-area requirements before using the SOIC package near its limits.
合規資訊
The device is identified as AEC-Q100 qualified for automotive applications. Other environmental and material compliance attributes are not established by the technical information summarized for this ordering code.