LM2902KVQDRG4 - Quad 30V 1.2MHz Op Amp | Texas Instruments
MPN: LM2902KVQDRG4 ✓ NakahandaLM2902KVQDRG4 Ulas
An operational amplifier is an analog amplifier that uses very high open-loop gain to amplify the difference between two input voltages. Within the broader semiconductor hierarchy, the LM2902KV is an amplifier IC, a linear operational amplifier, and a general-purpose precision signal-conditioning component. Multiple amplifiers can process independent channels or be configured together for instrumentation, filtering, buffering, comparison, or gain-control functions.
The key operating characteristics include a 1.2 MHz gain-bandwidth product and a slew rate of 0.5 V/µs. The input bias current is listed as low as 20 nA. Improved 2 kV ESD protection helps improve tolerance of electrostatic discharge encountered during handling or field use. The automotive-qualified grade is identified for automotive applications, while the extended 125°C upper operating temperature supports industrial and automotive environments.
The LM2902KV architecture uses four independent operational-amplifier channels in one package, reducing board area compared with four separate single or dual amplifier packages. Because each channel can operate from the same supply rails, the device can support common-mode input ranges close to the supply limits and can be used with single or split-supply arrangements, subject to the detailed operating limits in the manufacturer datasheet.
Typical applications include current-loop and voltage-loop signal conditioning, industrial sensor interfaces, automotive electronics, audio and communication equipment, active filtering, transducers, and general-purpose analog boards. The quad arrangement is particularly useful when four similar channels are required, such as in four-channel sensor acquisition, comparator-style threshold circuits, or multiple amplifier stages distributed across one assembly.
PCB design should account for input bias currents, output drive capability, supply decoupling, and the stability of each feedback network. Place the supply bypass capacitor close to the device supply pins, route sensitive input and feedback traces away from switching nodes, and use resistive networks that preserve the amplifier's intended bias-current balance. The 14-pin SOIC footprint simplifies hand assembly and automated surface-mount production.
This page combines the exact device identity, verified technical characteristics, application guidance, drop-in alternatives, and package-focused design considerations to support component selection and PCB planning. It also distinguishes directly interchangeable 14-pin parts from options that require closer electrical review.
Mga alternatibo na pwedeng ilagay na LM2902KVQDRG4 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok LM2902KVQDRG4 (parehas na form factor at footprint) — pagkakaiba sa Package, Maximum Supply Voltage, Supply Configuration, Amplifier Type, Operating Temperature Range.
LM2902M
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →LM2902M/NOPB
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →LM2902B
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
LM2902DR
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →LM2902DR
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →LM2902DR
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →LM2902KVQDRG4 Mga Pinakamataas na Rating at Electrical Characteristics
| Amplifier Type | Quad general-purpose operational amplifier |
| Number of Channels | 4 channels |
| Maximum Supply Voltage | 30 V |
| Gain-Bandwidth Product | 1.2 MHz |
| Slew Rate | 0.5 V/µs |
| Minimum Input Bias Current | 20 nA |
| ESD Protection | 2 kV |
| Hanay ng Temperature na Operasyon | -40°C to 125°C |
| Packhaging | 14-pin SOIC (D) |
| Uri ng Pagpapasok | Surface mount |
| Automotive Qualification | AEC-Q100 qualified |
| Total Number of Pins | 14 pins |
Gabay sa Pin Configuration ng LM2902KVQDRG4 14-pin soic (d)
Pin configuration para sa LM2902KVQDRG4 (14-pin soic (d) package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa LM2902KVQDRG4.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
LM2902KVQDRG4 ay nararapat para sa 6 aplikasyons: Industrial Sensor Signal Conditioning, Automotive Low-Speed Analog Control, Active Filtering and Gain Control, Audio and Communication Buffers, Data Acquisition Front End, Power Supply Monitoring.
Industrial Sensor Signal Conditioning
The LM2902KVQDRG4 fits four-channel industrial sensor conditioning because it combines four independent amplifiers, a 1.2 MHz gain-bandwidth product, and operation from -40°C to 125°C. Each channel can provide gain, buffering, inversion, or active filtering around a sensor signal without requiring four separate amplifier packages. The 30 V supply rating also supports headroom for industrial interfaces. Designers should verify the input common-mode range, output swing, and offset requirements for the selected sensor, then use short input paths and balanced feedback resistors to reduce bias-current error.
Inirekomenda
Automotive Low-Speed Analog Control
The LM2902KVQDRG4 is suitable for automotive low-speed analog control because it is identified as AEC-Q100 qualified and operates across -40°C to 125°C. Four channels can support actuator conditioning, sensor interfaces, voltage comparison, or low-bandwidth feedback loops in one 14-pin SOIC. Its 2 kV ESD protection is useful in automotive environments, while the 1.2 MHz gain-bandwidth product covers general-purpose control tasks rather than demanding high-speed signal processing. Validate the complete automotive bill of materials, fault conditions, and production qualification status.
Inirekomenda
Active Filtering and Gain Control
The LM2902KVQDRG4 can implement active filters or cascaded gain stages where four repeatable amplifier channels provide useful board-area savings. Its 1.2 MHz gain-bandwidth product and 0.5 V/µs slew rate support low-frequency filtering, transconductance conversion, and moderate-bandwidth closed-loop amplifiers. Component tolerances, the op-amp's gain-bandwidth response, and capacitive loading determine usable bandwidth. Keep each feedback loop compact and place filter capacitors close to their associated nodes to reduce parasitic effects and oscillation risk.
Inirekomenda
Audio and Communication Buffers
The LM2902KVQDRG4 is suitable for audio and communication boards requiring four general-purpose buffers or gain stages at moderate frequency. The 1.2 MHz gain-bandwidth product is appropriate for many control, interface, and low-frequency audio paths, while the 0.5 V/µs slew rate reduces distortion risk when driving moderate capacitive and resistive loads. Verify output-current and output-swing limits for the intended load, avoid excessive capacitive loading, and isolate analog paths from switching converters and high-current digital return paths.
Inirekomenda
Data Acquisition Front End
A 14-pin quad amplifier can serve as the first analog stage in a multiplexed or multi-channel data-acquisition front end. The LM2902KVQDRG4 provides four channels with a 1.2 MHz gain-bandwidth product, 20 nA minimum input bias current, and a wide -40°C to 125°C operating range. Input offset and bias-current error become important with high-impedance sensors, so the source impedance, feedback resistance, and settling requirements must be calculated together. The device is best suited to moderate-bandwidth acquisition rather than high-speed precision sampling.
Inirekomenda
Power Supply Monitoring
The LM2902KVQDRG4 can monitor multiple supply or system voltages by using each amplifier as a buffered comparator against a reference. Its 30 V maximum supply rating provides useful operating headroom for industrial rails, although each input must remain within the specified common-mode range. The four-channel package reduces footprint and component count compared with separate single amplifiers. Design the reference network for accuracy, include hysteresis where appropriate to prevent repeated switching, and check output behavior during startup and supply transients.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for LM2902KVQDRG4 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | LM2902M | LM2902M/NOPB | LM2902B | LM2902DR | LM2902DR |
|---|---|---|---|---|---|---|
| Package | 14-pin SOIC (D) | 14-pin SOIC (D) | 14-pin SOIC (D) | 14-pin SOIC (D) | 14-pin SOIC (D) | 14-pin SOIC (D) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | STMicroelectronics | onsemi |
| Number of Amplifier Channels | 4 channels | 4 channels | 4 channels | 4 channels | 4 channels | 4 channels |
| Gain-Bandwidth Product | 1.2 MHz | 1.2 MHz | 1.2 MHz | 1.2 MHz | Approximately 1.2 MHz class | Approximately 1.2 MHz class |
Pangunahing mga Pagkakaiba
- Specified automotive qualification (kumpara saLM2902M)
- Improved ESD capability (kumpara saLM2902M)
- Consistent quad integration (kumpara saLM2902B)
- Same 14-SOIC footprint across cross-brand candidates (kumpara saLM2902DR)
Talaan ng Disenyo
Do not treat the shared SOIC-14 footprint as proof of automatic equivalence. Before substituting LM2902M, LM2902B, or an LM2902DR, compare maximum supply voltage, input common-mode range, output swing, input offset voltage, bias current, noise, output drive, and temperature qualification. The LM2902KVQDRG4 is rated for 30 V, 2 kV ESD protection, and -40°C to 125°C operation, so a substitute must satisfy all circuit limits rather than only the pin count.
Place the supply bypass capacitor next to the device's supply and ground pins, and keep each amplifier's output, feedback network, and input path compact. High-impedance inputs are especially sensitive to leakage and surface contamination; use guarding where appropriate and avoid routing input traces beside digital switching nodes. Balanced feedback resistors can reduce input-bias-current offset, particularly when the source impedance is high.
Estimated: with a 30 V maximum supply and a typical 15 V output, the maximum power dissipation from the four amplifier channels is governed by the device's quiescent current and output-current dissipation, which are not numerically specified in the available technical summary. Use the manufacturer datasheet's worst-case quiescent current, output-current limit, and thermal information to calculate junction temperature and copper-area requirements before using the SOIC package near its limits.
Impormasyon ng Pagsunod sa Kautusan
The device is identified as AEC-Q100 qualified for automotive applications. Other environmental and material compliance attributes are not established by the technical information summarized for this ordering code.