MAX3221EEAE+TG071 - 250kbps RS-232 Transceiver | Maxim
MPN: MAX3221EEAE+TG071 ✓ সক্রিয়MAX3221EEAE+TG071 সারাংশ
An RS-232 transceiver is an interface integrated circuit that converts logic-level signals from a host, controller, or embedded system into RS-232 levels and converts incoming RS-232 signals back into logic-compatible levels. In the product hierarchy, the MAX3221EEAE+TG071 is an RS-232 transceiver within the interface IC and communications-semiconductor categories.
The device includes one transmitter and one receiver, making it suitable for point-to-point serial links. Its 3.0 V to 5.5 V operating range supports both 3.3 V and 5 V systems. Automatic shutdown reduces supply consumption when no valid receiver activity is detected, while automatic wake-up restores operation after valid data returns. The ±15 kV ESD protection improves ruggedness on exposed cable and connector interfaces.
The MAX3221E family uses an on-chip charge pump and four small external capacitors to generate the bipolar voltage required by an RS-232 transmitter from a single positive supply. This arrangement eliminates the need for a separate negative supply rail. The MAX3221 variant has one driver and one receiver in 16 pins, distinguishing it from the two-channel MAX3223 and the higher-channel-count MAX3243.
Typical applications include industrial equipment serial ports, configuration and programming interfaces, point-of-sale terminals, barcode and data-acquisition equipment, laboratory instruments, and embedded control systems. The 250 kbps capability suits legacy asynchronous RS-232 communication where full-duplex point-to-point connectivity is required rather than a multi-drop bus.
When laying out the PCB, keep the four charge-pump capacitors close to their specified pins and provide the receiver interface with appropriate ESD protection and controlled return paths. Confirm that the external connector, cable, and logic controller can support the selected signaling rate before treating 250 kbps as an end-to-end guaranteed throughput.
This page combines the exact MAX3221EEAE+TG071 ordering code with package details, functional comparisons, application guidance, and design considerations. It also distinguishes true pin-compatible replacements from similarly packaged devices whose channel count or data rate makes them unsuitable for a direct PCB substitution.
এর জন্য ড্রপ-ইন বিকল্প MAX3221EEAE+TG071 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible MAX3221EEAE+TG071 (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, ESD Protection, External Charge-Pump Capacitors, Product Type, RoHS Status.
MAX3221IDBR
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →TRS3221EIDBR
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →MAX3221EEAE+TG071 বিশেষণ
| Product Type | RS-232 line-driver and receiver transceiver |
| Number of Drivers | 1 |
| Number of Receivers | 1 |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| ESD Protection | ±15 kV |
| AutoShutdown Supply Current | approximately 1 µA |
| External Charge-Pump Capacitors | 4 capacitors |
| প্যাকেজ | 16-pin SSOP |
| মাউন্টিং টাইপ | Surface mount |
| অপারেটিং তাপমাত্রার পরিসর | -40 °C to +85 °C |
| Termination Finish | Matte tin (Sn) |
| Moisture Sensitivity Level | MSL 1 |
| JESD-609 Classification | e3 |
| Peak Reflow Temperature | 260 °C |
| Peak Reflow Time | 30 s maximum |
| RoHS স্ট্যাটাস | unknown |
| REACH Status | unknown |
| Automotive AEC-Q100 Status | unknown |
MAX3221EEAE+TG071 16-pin ssop পিন কনফিগারেশন গাইড
MAX3221EEAE+TG071 (16-pin ssop প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MAX3221EEAE+TG071.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
MAX3221EEAE+TG071 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Serial Port Interface, Point-of-Sale Terminal Interface, Barcode and Data-Acquisition Equipment, Test and Measurement Instrument, Embedded Configuration and Programming Port, Battery-Powered Portable Equipment.
Industrial Serial Port Interface
The MAX3221EEAE+TG071 fits point-to-point industrial serial interfaces that require one driver and one receiver. Its 3.0 V to 5.5 V supply range supports 3.3 V control electronics, while 250 kbps is suitable for configuration, diagnostic, and legacy equipment links. The ±15 kV ESD protection improves robustness at an exposed connector. The circuit uses the on-chip charge pump with four external capacitors, so a 16-pin SSOP placement is practical in compact controller boards.
সুপারিশকৃত
Point-of-Sale Terminal Interface
The MAX3221EEAE+TG071 can provide the physical-layer interface between a point-of-sale terminal and a host or peripheral using legacy RS-232. Its 250 kbps maximum signaling rate is more than adequate for command exchanges, receipts, status messages, and configuration traffic. Operating from 3.0 V to 5.5 V simplifies interface design with mixed-voltage systems, while automatic shutdown reduces standby consumption. ESD protection is especially useful where the cable reaches an accessible enclosure-mounted connector.
সুপারিশকৃত
Barcode and Data-Acquisition Equipment
The MAX3221EEAE+TG071 is appropriate for barcode scanners, laboratory instruments, and data-acquisition controllers that exchange short commands or measurement records over RS-232. The 250 kbps rate supports responsive asynchronous communication, while the 3.0 V minimum supply permits operation directly from 3.3 V rails. Automatic shutdown helps conserve power between transactions, and ±15 kV ESD protection strengthens the external line interface. A single driver and receiver are sufficient for a dedicated full-duplex link.
সুপারিশকৃত
Test and Measurement Instrument
The MAX3221EEAE+TG071 can connect a test instrument to a PC, controller, or service terminal over a short RS-232 cable. Its 250 kbps capability supports instrument commands and measured-data transfers, and the 16-pin SSOP package leaves board area for other analog and digital circuitry. The transceiver's automatic shutdown and wake-up functions can reduce consumption during idle periods. ESD protection adds useful robustness at the instrument connector, where cables may be connected and disconnected during maintenance.
সুপারিশকৃত
Embedded Configuration and Programming Port
The MAX3221EEAE+TG071 is useful for manufacturing and field-configuration ports on embedded equipment because it bridges a low-voltage UART to a conventional RS-232 connector. It operates from 3.0 V to 5.5 V and supports up to 250 kbps, which is adequate for firmware commands, status information, and log transfer. Automatic shutdown reduces power when the service port is inactive. The designer must still account for connector grounding, cable routing, and system-level ESD requirements.
সুপারিশকৃত
Battery-Powered Portable Equipment
The MAX3221EEAE+TG071 can suit portable or intermittently connected equipment where an RS-232 port is needed but continuous power is undesirable. Its approximately 1 µA AutoShutdown supply current and automatic wake-up behavior reduce the energy burden during idle periods, while operation from 3.0 V to 5.5 V allows use with common portable-system rails. The 250 kbps rate supports command and status exchanges rather than high-volume continuous transfers. Firmware can coordinate shutdown when deterministic power-state control is preferred.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MAX3221EEAE+TG071 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | MAX3221IDBR | TRS3221EIDBR |
|---|---|---|---|
| Manufacturer | Maxim Integrated | Texas Instruments | Texas Instruments |
| Package | 16-pin SSOP | 16-pin SSOP - same | 16-pin SSOP - same |
| Transmitter and Receiver Count | 1 driver and 1 receiver | 1 driver and 1 receiver | 1 driver and 1 receiver |
| Supply Voltage Range | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V |
| Maximum Data Rate | 250 kbps | 250 kbps | 250 kbps |
| ESD Protection | ±15 kV | IEC 61000-4-2 protection | ±15 kV IEC ESD protection |
মূল পার্থক্যসমূহ
- Directly matches the principal operating ratings of the pin-compatible MAX3221IDBR (বনামMAX3221IDBR)
- Provides the same headline voltage, speed, ESD, and package ratings as TRS3221EIDBR (বনামTRS3221EIDBR)
- Matches the required single-channel RS-232 function without excess drivers (বনামMAX3221IDBR)
ডিজাইন নোট
Place the four charge-pump capacitors close to their designated MAX3221EEAE+TG071 pins and follow the manufacturer's recommended capacitance and tolerance. Keep the charge-pump loop compact to minimize switching noise coupling into nearby analog or high-impedance circuitry. Route the RS-232 driver output and receiver input as direct, short interface paths, and verify the ground reference used by the connected cable.
Do not treat the 250 kbps device rating as a guarantee for every external cable, connector, or host UART. Check rise time, cable length, grounding, and the logic controller's baud-rate tolerance before installation. Also verify enable polarity and automatic wake-up timing in software; unexpected transmitter activity can occur if a floating receiver input or unsuitable connector wiring is left in place.
Keep the RS-232 connector and transceiver interface section away from sensitive analog inputs and high-speed digital clocks where practical. Maintain a continuous return-path strategy between the equipment ground and the cable shield. If the connector is externally accessible, retain the transceiver's ±15 kV ESD protection and consider whether the complete product requires additional galvanic isolation or surge protection beyond the IC rating.
কমপ্লায়েন্স তথ্য
The component listing identifies matte tin termination, MSL 1, JESD-609 code e3, and a 260 °C peak-reflow condition. No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration appears in the cited technical information.