Maxim Integrated

MAX3221EEAE+TG071 - 250kbps RS-232 Transceiver | Maxim

料号: MAX3221EEAE+TG071 ✓ 量产中
3.0 V to 5.5 V Vdss approximately 1 µA Id 16-pin SSOP Package
最小起订量: 1 |

MAX3221EEAE+TG071 概述

The Maxim Integrated MAX3221EEAE+TG071 is a single-channel RS-232 line-driver and receiver transceiver rated for 250 kbps, operating from a 3.0 V to 5.5 V supply in a 16-pin SSOP package. Its principal features include ±15 kV ESD protection, approximately 1 µA shutdown current, and automatic shutdown and wake-up behavior.

An RS-232 transceiver is an interface integrated circuit that converts logic-level signals from a host, controller, or embedded system into RS-232 levels and converts incoming RS-232 signals back into logic-compatible levels. In the product hierarchy, the MAX3221EEAE+TG071 is an RS-232 transceiver within the interface IC and communications-semiconductor categories.

The device includes one transmitter and one receiver, making it suitable for point-to-point serial links. Its 3.0 V to 5.5 V operating range supports both 3.3 V and 5 V systems. Automatic shutdown reduces supply consumption when no valid receiver activity is detected, while automatic wake-up restores operation after valid data returns. The ±15 kV ESD protection improves ruggedness on exposed cable and connector interfaces.

The MAX3221E family uses an on-chip charge pump and four small external capacitors to generate the bipolar voltage required by an RS-232 transmitter from a single positive supply. This arrangement eliminates the need for a separate negative supply rail. The MAX3221 variant has one driver and one receiver in 16 pins, distinguishing it from the two-channel MAX3223 and the higher-channel-count MAX3243.

Typical applications include industrial equipment serial ports, configuration and programming interfaces, point-of-sale terminals, barcode and data-acquisition equipment, laboratory instruments, and embedded control systems. The 250 kbps capability suits legacy asynchronous RS-232 communication where full-duplex point-to-point connectivity is required rather than a multi-drop bus.

When laying out the PCB, keep the four charge-pump capacitors close to their specified pins and provide the receiver interface with appropriate ESD protection and controlled return paths. Confirm that the external connector, cable, and logic controller can support the selected signaling rate before treating 250 kbps as an end-to-end guaranteed throughput.

This page combines the exact MAX3221EEAE+TG071 ordering code with package details, functional comparisons, application guidance, and design considerations. It also distinguishes true pin-compatible replacements from similarly packaged devices whose channel count or data rate makes them unsuitable for a direct PCB substitution.

直接替换替代料: MAX3221EEAE+TG071 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: MAX3221EEAE+TG071 (相同外形与封装尺寸) ——差异在于 Package, ESD Protection, External Charge-Pump Capacitors, Product Type, RoHS Status.

Texas Instruments
ESD Protection: ±15 kV HBM on serial-port connection pins, including GND
External Charge-Pump Capacitors: 4 × 0.1 µF
Product Type: Single-channel RS-232 line driver and receiver
对比 MAX3221EEAE+TG071 →
Texas Instruments
Package: 16-SSOP (DB)
RoHS Status: Compliant
对比 MAX3221EEAE+TG071 →

MAX3221IDBR

✅ 直接替换
Texas Instruments
📦 16-pin SSOP
Single-channel RS-232 line driver and receiver · 3 V to 5.5 V · 250 kbps · 1 · 1 · ±15 kV HBM on serial-port connection pins, including GND · 1 µA · 4 × 0.1 µF

联系询价

查看数据手册 →

TRS3221EIDBR

✅ 直接替换
Texas Instruments
📦 16-pin SSOP
RS-232 Line Driver/Receiver (1 driver + 1 receiver) · 3.0 V to 5.5 V · 250 kbps · ±15 kV · ±8 kV · ±15 kV · 1 / 1 · -40 °C to +85 °C

联系询价

查看数据手册 →

MAX3221EEAE+TG071 规格参数

Product Type RS-232 line-driver and receiver transceiver
Number of Drivers 1
Number of Receivers 1
Supply Voltage Range 3.0 V to 5.5 V
Maximum Data Rate 250 kbps
ESD Protection ±15 kV
AutoShutdown Supply Current approximately 1 µA
External Charge-Pump Capacitors 4 capacitors
封装 16-pin SSOP
安装类型 Surface mount
工作温度范围 -40 °C to +85 °C
Termination Finish Matte tin (Sn)
Moisture Sensitivity Level MSL 1
JESD-609 Classification e3
Peak Reflow Temperature 260 °C
Peak Reflow Time 30 s maximum
RoHS 状态 unknown
REACH Status unknown
Automotive AEC-Q100 Status unknown

MAX3221EEAE+TG071 16-pin ssop 引脚配置指南

MAX3221EEAE+TG071(16-pin ssop 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

MAX3221EEAE+TG071 的 16-pin ssop 封装引脚图

暂无详细引脚数据: MAX3221EEAE+TG071.

请参阅 数据手册 以查看完整引脚配置。

典型应用

MAX3221EEAE+TG071 适用于 6 应用s: Industrial Serial Port Interface, Point-of-Sale Terminal Interface, Barcode and Data-Acquisition Equipment, Test and Measurement Instrument, Embedded Configuration and Programming Port, Battery-Powered Portable Equipment.

🏭

Industrial Serial Port Interface

The MAX3221EEAE+TG071 fits point-to-point industrial serial interfaces that require one driver and one receiver. Its 3.0 V to 5.5 V supply range supports 3.3 V control electronics, while 250 kbps is suitable for configuration, diagnostic, and legacy equipment links. The ±15 kV ESD protection improves robustness at an exposed connector. The circuit uses the on-chip charge pump with four external capacitors, so a 16-pin SSOP placement is practical in compact controller boards.

🏭

Point-of-Sale Terminal Interface

The MAX3221EEAE+TG071 can provide the physical-layer interface between a point-of-sale terminal and a host or peripheral using legacy RS-232. Its 250 kbps maximum signaling rate is more than adequate for command exchanges, receipts, status messages, and configuration traffic. Operating from 3.0 V to 5.5 V simplifies interface design with mixed-voltage systems, while automatic shutdown reduces standby consumption. ESD protection is especially useful where the cable reaches an accessible enclosure-mounted connector.

🖥️

Barcode and Data-Acquisition Equipment

The MAX3221EEAE+TG071 is appropriate for barcode scanners, laboratory instruments, and data-acquisition controllers that exchange short commands or measurement records over RS-232. The 250 kbps rate supports responsive asynchronous communication, while the 3.0 V minimum supply permits operation directly from 3.3 V rails. Automatic shutdown helps conserve power between transactions, and ±15 kV ESD protection strengthens the external line interface. A single driver and receiver are sufficient for a dedicated full-duplex link.

🔧

Test and Measurement Instrument

The MAX3221EEAE+TG071 can connect a test instrument to a PC, controller, or service terminal over a short RS-232 cable. Its 250 kbps capability supports instrument commands and measured-data transfers, and the 16-pin SSOP package leaves board area for other analog and digital circuitry. The transceiver's automatic shutdown and wake-up functions can reduce consumption during idle periods. ESD protection adds useful robustness at the instrument connector, where cables may be connected and disconnected during maintenance.

🧩

Embedded Configuration and Programming Port

The MAX3221EEAE+TG071 is useful for manufacturing and field-configuration ports on embedded equipment because it bridges a low-voltage UART to a conventional RS-232 connector. It operates from 3.0 V to 5.5 V and supports up to 250 kbps, which is adequate for firmware commands, status information, and log transfer. Automatic shutdown reduces power when the service port is inactive. The designer must still account for connector grounding, cable routing, and system-level ESD requirements.

📱

Battery-Powered Portable Equipment

The MAX3221EEAE+TG071 can suit portable or intermittently connected equipment where an RS-232 port is needed but continuous power is undesirable. Its approximately 1 µA AutoShutdown supply current and automatic wake-up behavior reduce the energy burden during idle periods, while operation from 3.0 V to 5.5 V allows use with common portable-system rails. The 250 kbps rate supports command and status exchanges rather than high-volume continuous transfers. Firmware can coordinate shutdown when deterministic power-state control is preferred.

推荐产品汇总

MAX3221 Single-channel family member for RS-232 point-to-point links 用于: Industrial Serial Port Interface, Point-of-Sale Terminal Interface, Barcode and Data-Acquisition Equipment, Test and Measurement Instrument, Embedded Configuration and Programming Port, Battery-Powered Portable Equipment MAX3223 Related family member for additional RS-232 channels 用于: Industrial Serial Port Interface, Point-of-Sale Terminal Interface, Test and Measurement Instrument, Embedded Configuration and Programming Port, Battery-Powered Portable Equipment MAX3243 Related family member for higher-channel-count RS-232 equipment 用于: Barcode and Data-Acquisition Equipment
What is the MAX3221EEAE+TG071?
The MAX3221EEAE+TG071 is a single-channel RS-232 transceiver with one line driver, one receiver, and automatic shutdown and wake-up functions. According to the Maxim Integrated datasheet, it operates from 3.0 V to 5.5 V, supports data rates up to 250 kbps, and provides ±15 kV ESD protection on its RS-232 pins. It is packaged in a 16-pin SSOP for compact point-to-point communications equipment.
What are the key specifications of MAX3221EEAE+TG071 that engineers should know?
The MAX3221EEAE+TG071 combines a 3.0 V to 5.5 V supply range, a maximum signaling rate of 250 kbps, one driver, one receiver, and ±15 kV ESD protection. According to the Maxim Integrated datasheet, AutoShutdown reduces supply current to approximately 1 µA when the receiver detects no valid signal. The device requires four external charge-pump capacitors and uses a 16-pin SSOP package.
Where can I download the MAX3221EEAE+TG071 datasheet PDF?
The official MAX3221E product page on Analog Devices provides the family documentation and product support resources. According to Maxim Integrated, the MAX3221EEAE+TG071 belongs to the MAX3221E/MAX3223E/MAX3243E family. Use the manufacturer datasheet for the complete pin description, electrical limits, charge-pump capacitor values, and RS-232 timing information associated with the MAX3221EEAE ordering code.
Where can I find the MAX3221EEAE+TG071 pinout?
Use the pin-description table in the Maxim Integrated MAX3221E family datasheet to identify all 16 terminals of the SSOP package. The MAX3221EEAE+TG071 requires four external charge-pump capacitors, so the capacitor connections, supply terminals, driver output, receiver input, and enable functions must be assigned from the official pin table. Do not infer pin functions solely from a generic SSOP outline or another member of the transceiver family.
What is the operating voltage of MAX3221EEAE+TG071?
The MAX3221EEAE+TG071 operates from 3.0 V to 5.5 V. According to the Maxim Integrated datasheet, this range allows the transceiver to be powered from either 3.3 V or 5 V system rails. The internal charge pump generates the signal levels needed by the RS-232 driver from this single positive supply, with four small external capacitors required for proper operation.
How fast can MAX3221EEAE+TG071 transmit RS-232 data?
The MAX3221EEAE+TG071 supports RS-232 signaling rates up to 250 kbps. According to the Maxim Integrated datasheet, this makes it suitable for conventional asynchronous point-to-point serial interfaces, including equipment configuration, data acquisition, and legacy industrial control links. Actual application throughput also depends on the host UART, cable characteristics, connector implementation, and the amount of framing overhead.
What can replace the MAX3221EEAE+TG071?
The strongest pin-compatible replacement identified is the Texas Instruments MAX3221IDBR, which uses a 16-pin SSOP package and shares the 3.0 V to 5.5 V supply range and 250 kbps class of operation. The TRS3221EIDBR is another 16-SSOP candidate with matching headline voltage and speed ratings. Always confirm the exact pin functions, AutoShutdown behavior, charge-pump connections, and temperature range against the current manufacturer datasheet before replacing an assembled board.
Is the MAX3221EEAE+TG071 the same as MAX3221IDBR?
The MAX3221EEAE+TG071 and MAX3221IDBR are closely related single-channel RS-232 transceivers in 16-pin SSOP packages, with a 3.0 V to 5.5 V supply range and a 250 kbps operating class. According to the Texas Instruments product information, MAX3221IDBR is a MAX3221E-family device. Verify enable polarity, shutdown timing, charge-pump pinout, and exact order-code temperature and packaging requirements before treating it as a drop-in replacement.
MAX3221EEAE+TG071 vs TRS3221EIDBR: which is better for a new design?
The MAX3221EEAE+TG071 and TRS3221EIDBR both support 3.0 V to 5.5 V operation, 250 kbps signaling, ±15 kV ESD protection, and a 16-pin SSOP package. According to the comparison information, both are specified over -40 °C to +85 °C. The practical choice should follow the exact pin description, AutoShutdown behavior, lifecycle requirements, and verified component availability rather than headline ratings alone.
When should I choose MAX3221EEAE+TG071 over a similar RS-232 transceiver?
Choose the MAX3221EEAE+TG071 when a compact 16-pin SSOP design needs one RS-232 driver and one receiver, a 3.0 V to 5.5 V supply, and automatic low-power shutdown. According to the Maxim Integrated datasheet, its maximum data rate is 250 kbps and its RS-232 pins include ±15 kV ESD protection. Multi-drop or multidrop networks should use an interface designed for that topology instead.
Is MAX3221EEAE+TG071 suitable for industrial RS-232 equipment?
The MAX3221EEAE+TG071 is suitable for many industrial RS-232 interfaces because it supports 3.0 V to 5.5 V operation, 250 kbps signaling, ±15 kV ESD protection, and a -40 °C to +85 °C temperature range. According to the Maxim Integrated family documentation, it is a point-to-point line-driver and receiver interface. System-level surge, isolation, grounding, and regulatory requirements still apply to the complete equipment.
How does AutoShutdown help MAX3221EEAE+TG071 designs?
AutoShutdown reduces the MAX3221EEAE+TG071 supply current to approximately 1 µA when its receiver inputs do not detect a valid signal level. According to the Maxim Integrated datasheet, the device can automatically wake when valid activity resumes. This is useful in battery-operated and intermittently connected instruments, although firmware can also control the transceiver through its enable function when deterministic shutdown timing is required.
Does MAX3221EEAE+TG071 need a negative supply voltage?
No external negative supply is required for the MAX3221EEAE+TG071. According to the Maxim Integrated datasheet, an on-board charge pump and four small external capacitors generate the bipolar voltage needed by the RS-232 driver from a single 3.0 V to 5.5 V supply. Place the specified capacitors close to their pins and follow the manufacturer's values and layout guidance to minimize switching noise and maintain stable operation.
Where can I buy MAX3221EEAE+TG071 and check its lead time?
Use the Request a Quote form on this page to request current pricing, stock status, minimum order quantity, and lead time for the MAX3221EEAE+TG071. Quote requests allow the exact tape-and-reel ordering code to be checked against manufacturing availability and packaging requirements. No static price or stock claim is made because current commercial terms can change independently of the component's technical specifications.
What is the best cross-brand equivalent for MAX3221EEAE+TG071?
The TRS3221EIDBR is the best-supported cross-brand candidate identified for the MAX3221EEAE+TG071 because both use a 16-pin SSOP package, a 3.0 V to 5.5 V supply, a 250 kbps data rate, ±15 kV ESD protection, and a -40 °C to +85 °C temperature range. According to the published comparison information, it is a direct-format alternative, but the official pin and timing tables should still be checked before PCB substitution.

工程参考数据: MAX3221EEAE+TG071 ——对比、设计指导和合规信息。

选型指南

Choose the MAX3221EEAE+TG071 when a compact 16-pin SSOP board needs one RS-232 driver and one receiver, operation from 3.0 V to 5.5 V, data rates up to 250 kbps, and automatic shutdown and wake-up. The MAX3221IDBR is a strong same-footprint alternative when its exact enable, charge-pump, and timing behavior matches the completed design. The TRS3221EIDBR offers the same headline package, voltage, speed, ESD, and temperature ratings and can be evaluated for a second sourcing path. Neither alternative should replace the target without checking the official pin descriptions and timing behavior. This is a point-to-point interface, not a multidrop RS-485 transceiver. For systems requiring more channels, the MAX3223 or MAX3243 family members add drivers and receivers but do not share the same functional pin configuration. When low standby consumption, exposed-connector robustness, and a single positive supply are priorities, the MAX3221EEAE+TG071 remains the directly aligned choice.

与替代料对比

参数 本产品 MAX3221IDBR TRS3221EIDBR
Manufacturer Maxim Integrated Texas Instruments Texas Instruments
Package 16-pin SSOP 16-pin SSOP - same 16-pin SSOP - same
Transmitter and Receiver Count 1 driver and 1 receiver 1 driver and 1 receiver 1 driver and 1 receiver
Supply Voltage Range 3.0 V to 5.5 V 3.0 V to 5.5 V 3.0 V to 5.5 V
Maximum Data Rate 250 kbps 250 kbps 250 kbps
ESD Protection ±15 kV IEC 61000-4-2 protection ±15 kV IEC ESD protection

关键差异点

  • Directly matches the principal operating ratings of the pin-compatible MAX3221IDBR (对比 MAX3221IDBR)
  • Provides the same headline voltage, speed, ESD, and package ratings as TRS3221EIDBR (对比 TRS3221EIDBR)
  • Matches the required single-channel RS-232 function without excess drivers (对比 MAX3221IDBR)

设计说明

Place the four charge-pump capacitors close to their designated MAX3221EEAE+TG071 pins and follow the manufacturer's recommended capacitance and tolerance. Keep the charge-pump loop compact to minimize switching noise coupling into nearby analog or high-impedance circuitry. Route the RS-232 driver output and receiver input as direct, short interface paths, and verify the ground reference used by the connected cable.

Do not treat the 250 kbps device rating as a guarantee for every external cable, connector, or host UART. Check rise time, cable length, grounding, and the logic controller's baud-rate tolerance before installation. Also verify enable polarity and automatic wake-up timing in software; unexpected transmitter activity can occur if a floating receiver input or unsuitable connector wiring is left in place.

Keep the RS-232 connector and transceiver interface section away from sensitive analog inputs and high-speed digital clocks where practical. Maintain a continuous return-path strategy between the equipment ground and the cable shield. If the connector is externally accessible, retain the transceiver's ±15 kV ESD protection and consider whether the complete product requires additional galvanic isolation or surge protection beyond the IC rating.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The component listing identifies matte tin termination, MSL 1, JESD-609 code e3, and a 260 °C peak-reflow condition. No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration appears in the cited technical information.

相关搜索

MAX3221EEAE+TG071 datasheet MAX3221EEAE+TG071 pinout MAX3221EEAE+TG071 datasheet pdf MAX3221EEAE+TG071 equivalent MAX3221EEAE+TG071 replacement MAX3221EEAE+TG071 cross reference MAX3221EEAE+TG071 vs MAX3221IDBR MAX3221EEAE+TG071 vs TRS3221EIDBR MAX3221EEAE+TG071 SSOP-16 MAX3221EEAE+TG071 250kbps RS-232 MAX3221EEAE+TG071 price MAX3221EEAE+TG071 stock Maxim MAX3221EEAE+TG071 MAX3221EEAE+TG071 application circuit MAX3221EEAE+TG071 footprint

相关元器件 & 术语

Maxim Integrated MAX3221EEAE+TG071 MAX3221E MAX3221IDBR TRS3221EIDBR MAX3221 MAX3223 MAX3243 RS-232 transceiver RS-232 line driver RS-232 receiver interface IC communications semiconductor AutoShutdown automatic wake-up charge pump 250 kbps 3.0 V to 5.5 V ±15 kV ESD protection 16-pin SSOP TIA/EIA-232-F V.28/V.24 IEC 61000-4-2 industrial serial communication JESD-609 RoHS REACH AEC-Q100
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情