MAX3221EEAE+TG071 - 250kbps RS-232 Transceiver | Maxim
N.º de pieza: MAX3221EEAE+TG071 ✓ ActivoMAX3221EEAE+TG071 Descripción general
An RS-232 transceiver is an interface integrated circuit that converts logic-level signals from a host, controller, or embedded system into RS-232 levels and converts incoming RS-232 signals back into logic-compatible levels. In the product hierarchy, the MAX3221EEAE+TG071 is an RS-232 transceiver within the interface IC and communications-semiconductor categories.
The device includes one transmitter and one receiver, making it suitable for point-to-point serial links. Its 3.0 V to 5.5 V operating range supports both 3.3 V and 5 V systems. Automatic shutdown reduces supply consumption when no valid receiver activity is detected, while automatic wake-up restores operation after valid data returns. The ±15 kV ESD protection improves ruggedness on exposed cable and connector interfaces.
The MAX3221E family uses an on-chip charge pump and four small external capacitors to generate the bipolar voltage required by an RS-232 transmitter from a single positive supply. This arrangement eliminates the need for a separate negative supply rail. The MAX3221 variant has one driver and one receiver in 16 pins, distinguishing it from the two-channel MAX3223 and the higher-channel-count MAX3243.
Typical applications include industrial equipment serial ports, configuration and programming interfaces, point-of-sale terminals, barcode and data-acquisition equipment, laboratory instruments, and embedded control systems. The 250 kbps capability suits legacy asynchronous RS-232 communication where full-duplex point-to-point connectivity is required rather than a multi-drop bus.
When laying out the PCB, keep the four charge-pump capacitors close to their specified pins and provide the receiver interface with appropriate ESD protection and controlled return paths. Confirm that the external connector, cable, and logic controller can support the selected signaling rate before treating 250 kbps as an end-to-end guaranteed throughput.
This page combines the exact MAX3221EEAE+TG071 ordering code with package details, functional comparisons, application guidance, and design considerations. It also distinguishes true pin-compatible replacements from similarly packaged devices whose channel count or data rate makes them unsuitable for a direct PCB substitution.
Alternativas directas para MAX3221EEAE+TG071 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con MAX3221EEAE+TG071 (mismo factor de forma y huella) — difiere en Package, ESD Protection, External Charge-Pump Capacitors, Product Type, RoHS Status.
MAX3221IDBR
✅ Sustitución directaConsulte el precio
Ver hoja de datos →TRS3221EIDBR
✅ Sustitución directaConsulte el precio
Ver hoja de datos →MAX3221EEAE+TG071 Especificaciones
| Product Type | RS-232 line-driver and receiver transceiver |
| Number of Drivers | 1 |
| Number of Receivers | 1 |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| ESD Protection | ±15 kV |
| AutoShutdown Supply Current | approximately 1 µA |
| External Charge-Pump Capacitors | 4 capacitors |
| Encapsulado | 16-pin SSOP |
| Tipo de montaje | Surface mount |
| Rango de temperatura de funcionamiento | -40 °C to +85 °C |
| Termination Finish | Matte tin (Sn) |
| Moisture Sensitivity Level | MSL 1 |
| JESD-609 Classification | e3 |
| Peak Reflow Temperature | 260 °C |
| Peak Reflow Time | 30 s maximum |
| Estado RoHS | unknown |
| REACH Status | unknown |
| Automotive AEC-Q100 Status | unknown |
Guía de configuración de pines de MAX3221EEAE+TG071 16-pin ssop
Configuración de pines para MAX3221EEAE+TG071 (encapsulado 16-pin ssop). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para MAX3221EEAE+TG071.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
MAX3221EEAE+TG071 es adecuado para 6 aplicacións: Industrial Serial Port Interface, Point-of-Sale Terminal Interface, Barcode and Data-Acquisition Equipment, Test and Measurement Instrument, Embedded Configuration and Programming Port, Battery-Powered Portable Equipment.
Industrial Serial Port Interface
The MAX3221EEAE+TG071 fits point-to-point industrial serial interfaces that require one driver and one receiver. Its 3.0 V to 5.5 V supply range supports 3.3 V control electronics, while 250 kbps is suitable for configuration, diagnostic, and legacy equipment links. The ±15 kV ESD protection improves robustness at an exposed connector. The circuit uses the on-chip charge pump with four external capacitors, so a 16-pin SSOP placement is practical in compact controller boards.
Recomendado
Point-of-Sale Terminal Interface
The MAX3221EEAE+TG071 can provide the physical-layer interface between a point-of-sale terminal and a host or peripheral using legacy RS-232. Its 250 kbps maximum signaling rate is more than adequate for command exchanges, receipts, status messages, and configuration traffic. Operating from 3.0 V to 5.5 V simplifies interface design with mixed-voltage systems, while automatic shutdown reduces standby consumption. ESD protection is especially useful where the cable reaches an accessible enclosure-mounted connector.
Recomendado
Barcode and Data-Acquisition Equipment
The MAX3221EEAE+TG071 is appropriate for barcode scanners, laboratory instruments, and data-acquisition controllers that exchange short commands or measurement records over RS-232. The 250 kbps rate supports responsive asynchronous communication, while the 3.0 V minimum supply permits operation directly from 3.3 V rails. Automatic shutdown helps conserve power between transactions, and ±15 kV ESD protection strengthens the external line interface. A single driver and receiver are sufficient for a dedicated full-duplex link.
Recomendado
Test and Measurement Instrument
The MAX3221EEAE+TG071 can connect a test instrument to a PC, controller, or service terminal over a short RS-232 cable. Its 250 kbps capability supports instrument commands and measured-data transfers, and the 16-pin SSOP package leaves board area for other analog and digital circuitry. The transceiver's automatic shutdown and wake-up functions can reduce consumption during idle periods. ESD protection adds useful robustness at the instrument connector, where cables may be connected and disconnected during maintenance.
Recomendado
Embedded Configuration and Programming Port
The MAX3221EEAE+TG071 is useful for manufacturing and field-configuration ports on embedded equipment because it bridges a low-voltage UART to a conventional RS-232 connector. It operates from 3.0 V to 5.5 V and supports up to 250 kbps, which is adequate for firmware commands, status information, and log transfer. Automatic shutdown reduces power when the service port is inactive. The designer must still account for connector grounding, cable routing, and system-level ESD requirements.
Recomendado
Battery-Powered Portable Equipment
The MAX3221EEAE+TG071 can suit portable or intermittently connected equipment where an RS-232 port is needed but continuous power is undesirable. Its approximately 1 µA AutoShutdown supply current and automatic wake-up behavior reduce the energy burden during idle periods, while operation from 3.0 V to 5.5 V allows use with common portable-system rails. The 250 kbps rate supports command and status exchanges rather than high-volume continuous transfers. Firmware can coordinate shutdown when deterministic power-state control is preferred.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MAX3221EEAE+TG071 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | MAX3221IDBR | TRS3221EIDBR |
|---|---|---|---|
| Manufacturer | Maxim Integrated | Texas Instruments | Texas Instruments |
| Package | 16-pin SSOP | 16-pin SSOP - same | 16-pin SSOP - same |
| Transmitter and Receiver Count | 1 driver and 1 receiver | 1 driver and 1 receiver | 1 driver and 1 receiver |
| Supply Voltage Range | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V |
| Maximum Data Rate | 250 kbps | 250 kbps | 250 kbps |
| ESD Protection | ±15 kV | IEC 61000-4-2 protection | ±15 kV IEC ESD protection |
Diferenciadores clave
- Directly matches the principal operating ratings of the pin-compatible MAX3221IDBR (frente a MAX3221IDBR)
- Provides the same headline voltage, speed, ESD, and package ratings as TRS3221EIDBR (frente a TRS3221EIDBR)
- Matches the required single-channel RS-232 function without excess drivers (frente a MAX3221IDBR)
Notas de diseño
Place the four charge-pump capacitors close to their designated MAX3221EEAE+TG071 pins and follow the manufacturer's recommended capacitance and tolerance. Keep the charge-pump loop compact to minimize switching noise coupling into nearby analog or high-impedance circuitry. Route the RS-232 driver output and receiver input as direct, short interface paths, and verify the ground reference used by the connected cable.
Do not treat the 250 kbps device rating as a guarantee for every external cable, connector, or host UART. Check rise time, cable length, grounding, and the logic controller's baud-rate tolerance before installation. Also verify enable polarity and automatic wake-up timing in software; unexpected transmitter activity can occur if a floating receiver input or unsuitable connector wiring is left in place.
Keep the RS-232 connector and transceiver interface section away from sensitive analog inputs and high-speed digital clocks where practical. Maintain a continuous return-path strategy between the equipment ground and the cable shield. If the connector is externally accessible, retain the transceiver's ±15 kV ESD protection and consider whether the complete product requires additional galvanic isolation or surge protection beyond the IC rating.
Información de cumplimiento
The component listing identifies matte tin termination, MSL 1, JESD-609 code e3, and a 260 °C peak-reflow condition. No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration appears in the cited technical information.