MAX3221EEAE+TG071 - 250kbps RS-232 Transceiver | Maxim
MPN: MAX3221EEAE+TG071 ✓ NakahandaMAX3221EEAE+TG071 Ulas
An RS-232 transceiver is an interface integrated circuit that converts logic-level signals from a host, controller, or embedded system into RS-232 levels and converts incoming RS-232 signals back into logic-compatible levels. In the product hierarchy, the MAX3221EEAE+TG071 is an RS-232 transceiver within the interface IC and communications-semiconductor categories.
The device includes one transmitter and one receiver, making it suitable for point-to-point serial links. Its 3.0 V to 5.5 V operating range supports both 3.3 V and 5 V systems. Automatic shutdown reduces supply consumption when no valid receiver activity is detected, while automatic wake-up restores operation after valid data returns. The ±15 kV ESD protection improves ruggedness on exposed cable and connector interfaces.
The MAX3221E family uses an on-chip charge pump and four small external capacitors to generate the bipolar voltage required by an RS-232 transmitter from a single positive supply. This arrangement eliminates the need for a separate negative supply rail. The MAX3221 variant has one driver and one receiver in 16 pins, distinguishing it from the two-channel MAX3223 and the higher-channel-count MAX3243.
Typical applications include industrial equipment serial ports, configuration and programming interfaces, point-of-sale terminals, barcode and data-acquisition equipment, laboratory instruments, and embedded control systems. The 250 kbps capability suits legacy asynchronous RS-232 communication where full-duplex point-to-point connectivity is required rather than a multi-drop bus.
When laying out the PCB, keep the four charge-pump capacitors close to their specified pins and provide the receiver interface with appropriate ESD protection and controlled return paths. Confirm that the external connector, cable, and logic controller can support the selected signaling rate before treating 250 kbps as an end-to-end guaranteed throughput.
This page combines the exact MAX3221EEAE+TG071 ordering code with package details, functional comparisons, application guidance, and design considerations. It also distinguishes true pin-compatible replacements from similarly packaged devices whose channel count or data rate makes them unsuitable for a direct PCB substitution.
Mga alternatibo na pwedeng ilagay na MAX3221EEAE+TG071 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok MAX3221EEAE+TG071 (parehas na form factor at footprint) — pagkakaiba sa Package, ESD Protection, External Charge-Pump Capacitors, Product Type, RoHS Status.
MAX3221IDBR
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →TRS3221EIDBR
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →MAX3221EEAE+TG071 Mga Spesipikasyon
| Product Type | RS-232 line-driver and receiver transceiver |
| Number of Drivers | 1 |
| Number of Receivers | 1 |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| ESD Protection | ±15 kV |
| AutoShutdown Supply Current | approximately 1 µA |
| External Charge-Pump Capacitors | 4 capacitors |
| Packhaging | 16-pin SSOP |
| Uri ng Pagpapasok | Surface mount |
| Hanay ng Temperature na Operasyon | -40 °C to +85 °C |
| Termination Finish | Matte tin (Sn) |
| Moisture Sensitivity Level | MSL 1 |
| JESD-609 Classification | e3 |
| Peak Reflow Temperature | 260 °C |
| Peak Reflow Time | 30 s maximum |
| Tindminan RoHS | unknown |
| REACH Status | unknown |
| Automotive AEC-Q100 Status | unknown |
Gabay sa Pin Configuration ng MAX3221EEAE+TG071 16-pin ssop
Pin configuration para sa MAX3221EEAE+TG071 (16-pin ssop package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa MAX3221EEAE+TG071.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
MAX3221EEAE+TG071 ay nararapat para sa 6 aplikasyons: Industrial Serial Port Interface, Point-of-Sale Terminal Interface, Barcode and Data-Acquisition Equipment, Test and Measurement Instrument, Embedded Configuration and Programming Port, Battery-Powered Portable Equipment.
Industrial Serial Port Interface
The MAX3221EEAE+TG071 fits point-to-point industrial serial interfaces that require one driver and one receiver. Its 3.0 V to 5.5 V supply range supports 3.3 V control electronics, while 250 kbps is suitable for configuration, diagnostic, and legacy equipment links. The ±15 kV ESD protection improves robustness at an exposed connector. The circuit uses the on-chip charge pump with four external capacitors, so a 16-pin SSOP placement is practical in compact controller boards.
Inirekomenda
Point-of-Sale Terminal Interface
The MAX3221EEAE+TG071 can provide the physical-layer interface between a point-of-sale terminal and a host or peripheral using legacy RS-232. Its 250 kbps maximum signaling rate is more than adequate for command exchanges, receipts, status messages, and configuration traffic. Operating from 3.0 V to 5.5 V simplifies interface design with mixed-voltage systems, while automatic shutdown reduces standby consumption. ESD protection is especially useful where the cable reaches an accessible enclosure-mounted connector.
Inirekomenda
Barcode and Data-Acquisition Equipment
The MAX3221EEAE+TG071 is appropriate for barcode scanners, laboratory instruments, and data-acquisition controllers that exchange short commands or measurement records over RS-232. The 250 kbps rate supports responsive asynchronous communication, while the 3.0 V minimum supply permits operation directly from 3.3 V rails. Automatic shutdown helps conserve power between transactions, and ±15 kV ESD protection strengthens the external line interface. A single driver and receiver are sufficient for a dedicated full-duplex link.
Inirekomenda
Test and Measurement Instrument
The MAX3221EEAE+TG071 can connect a test instrument to a PC, controller, or service terminal over a short RS-232 cable. Its 250 kbps capability supports instrument commands and measured-data transfers, and the 16-pin SSOP package leaves board area for other analog and digital circuitry. The transceiver's automatic shutdown and wake-up functions can reduce consumption during idle periods. ESD protection adds useful robustness at the instrument connector, where cables may be connected and disconnected during maintenance.
Inirekomenda
Embedded Configuration and Programming Port
The MAX3221EEAE+TG071 is useful for manufacturing and field-configuration ports on embedded equipment because it bridges a low-voltage UART to a conventional RS-232 connector. It operates from 3.0 V to 5.5 V and supports up to 250 kbps, which is adequate for firmware commands, status information, and log transfer. Automatic shutdown reduces power when the service port is inactive. The designer must still account for connector grounding, cable routing, and system-level ESD requirements.
Inirekomenda
Battery-Powered Portable Equipment
The MAX3221EEAE+TG071 can suit portable or intermittently connected equipment where an RS-232 port is needed but continuous power is undesirable. Its approximately 1 µA AutoShutdown supply current and automatic wake-up behavior reduce the energy burden during idle periods, while operation from 3.0 V to 5.5 V allows use with common portable-system rails. The 250 kbps rate supports command and status exchanges rather than high-volume continuous transfers. Firmware can coordinate shutdown when deterministic power-state control is preferred.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for MAX3221EEAE+TG071 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | MAX3221IDBR | TRS3221EIDBR |
|---|---|---|---|
| Manufacturer | Maxim Integrated | Texas Instruments | Texas Instruments |
| Package | 16-pin SSOP | 16-pin SSOP - same | 16-pin SSOP - same |
| Transmitter and Receiver Count | 1 driver and 1 receiver | 1 driver and 1 receiver | 1 driver and 1 receiver |
| Supply Voltage Range | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V |
| Maximum Data Rate | 250 kbps | 250 kbps | 250 kbps |
| ESD Protection | ±15 kV | IEC 61000-4-2 protection | ±15 kV IEC ESD protection |
Pangunahing mga Pagkakaiba
- Directly matches the principal operating ratings of the pin-compatible MAX3221IDBR (kumpara saMAX3221IDBR)
- Provides the same headline voltage, speed, ESD, and package ratings as TRS3221EIDBR (kumpara saTRS3221EIDBR)
- Matches the required single-channel RS-232 function without excess drivers (kumpara saMAX3221IDBR)
Talaan ng Disenyo
Place the four charge-pump capacitors close to their designated MAX3221EEAE+TG071 pins and follow the manufacturer's recommended capacitance and tolerance. Keep the charge-pump loop compact to minimize switching noise coupling into nearby analog or high-impedance circuitry. Route the RS-232 driver output and receiver input as direct, short interface paths, and verify the ground reference used by the connected cable.
Do not treat the 250 kbps device rating as a guarantee for every external cable, connector, or host UART. Check rise time, cable length, grounding, and the logic controller's baud-rate tolerance before installation. Also verify enable polarity and automatic wake-up timing in software; unexpected transmitter activity can occur if a floating receiver input or unsuitable connector wiring is left in place.
Keep the RS-232 connector and transceiver interface section away from sensitive analog inputs and high-speed digital clocks where practical. Maintain a continuous return-path strategy between the equipment ground and the cable shield. If the connector is externally accessible, retain the transceiver's ±15 kV ESD protection and consider whether the complete product requires additional galvanic isolation or surge protection beyond the IC rating.
Impormasyon ng Pagsunod sa Kautusan
The component listing identifies matte tin termination, MSL 1, JESD-609 code e3, and a 260 °C peak-reflow condition. No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration appears in the cited technical information.