Texas Instruments

MAX3232EIDWG4 - Dual RS-232 IC | Texas Instruments

MPN: MAX3232EIDWG4 ✓ সক্রিয়
3 V to 5.5 V Vdss 16-pin SOIC Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

MAX3232EIDWG4 সারাংশ

The Texas Instruments MAX3232EIDWG4 is a dual-channel RS-232 line driver and receiver interface IC with a 3 V to 5.5 V supply range, ±15 kV IEC ESD protection, and a 16-pin SOIC package. It converts CMOS/TTL logic levels to RS-232 levels and converts incoming RS-232 signals back to logic levels.

An RS-232 interface transceiver is a semiconductor that bridges the voltage-domain difference between digital logic and the bipolar RS-232 serial interface. The MAX3232EIDWG4 belongs to the interface IC hierarchy, where a transceiver integrates one or more line drivers and receivers with charge-pump circuitry and electrostatic-discharge protection. It is commonly placed between a microcontroller UART and an external serial connector.

Key features include two driver and two receiver channels, operation from 3 V to 5.5 V, and ±15 kV IEC ESD protection. The E suffix identifies the enhanced ESD-capable family, while the G4 ordering code denotes the green, standard industrial-temperature version associated with a −40 °C to +85 °C operating range. The 16-pin SOIC package supports conventional surface-mount assembly and is compatible with automated PCB production.

The MAX3232E uses on-chip charge-pump circuitry to generate the positive and negative voltage swings required by RS-232 without a negative supply input. This architecture allows the logic side to operate from a single 3 V to 5.5 V rail. The interface includes integrated protection for external connector signals, reducing the need for separate low-capacitance TVS devices when the board layout and routing follow the manufacturer's recommendations.

Typical applications include industrial serial controllers, test and measurement equipment, computer peripherals, point-of-sale terminals, embedded service ports, and legacy RS-232 equipment connected to modern microcontrollers. The dual-channel arrangement is useful when one system must support bidirectional communication, multiple RS-232 devices, or separate transmit and receive data paths.

PCB design should place the device near the RS-232 connector, route driver outputs and receiver inputs away from sensitive logic, and connect the charge-pump capacitors and supply-decoupling capacitor close to their specified pins. Keep unprotected external leads short and follow the datasheet's ESD layout guidance so that system-level transient performance is not limited by long copper traces.

This product page combines the exact ordering information, electrical limits, interface characteristics, package details, drop-in alternatives, comparison parameters, and practical PCB guidance needed to evaluate and implement the MAX3232EIDWG4 in a new design.

এর জন্য ড্রপ-ইন বিকল্প MAX3232EIDWG4 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible MAX3232EIDWG4 (একই form factor এবং footprint) — পার্থক্য রয়েছে ESD Protection, Product Type, Package, Supply Voltage Range, Number of Receivers.

Texas Instruments
ESD Protection: ±15 kV IEC pin-to-pin
Product Type: RS-232 line-driver and receiver transceiver
এর সাথে তুলনা করুন MAX3232EIDWG4 →
Texas Instruments
ESD Protection: ±15 kV
Product Type: 2/2 RS-232 line driver and receiver
এর সাথে তুলনা করুন MAX3232EIDWG4 →
Texas Instruments
ESD Protection: ±15kV
Product Type: Dual RS-232 line driver and receiver
Package: 16-pin TSSOP
এর সাথে তুলনা করুন MAX3232EIDWG4 →

MAX3232EIDR

✅ ড্রপ-ইন
Texas Instruments
📦 16-SOIC
Dual RS-232 line driver/receiver transceiver · 2 drivers · 2 receivers · 250 kbps · 3 V to 5.5 V · 3.3 V · RS-232 · ±15 kV

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MAX3232IPW

✅ ড্রপ-ইন
Texas Instruments
📦 16-SOIC
Dual RS-232 line driver and receiver · 2 channels · 2 channels · 3V to 5.5V · 250kbit/s · ±15kV · 5V logic · 0.1µF

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MAX3232ECDW

✅ ড্রপ-ইন
Texas Instruments
📦 16-SOIC
RS-232 line-driver and receiver transceiver · 3 V to 5.5 V · 2 · 2 · RS-232 · TIA/EIA-232-F · ±15 kV IEC pin-to-pin · Integrated dual charge pump

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MAX3232ID

✅ ড্রপ-ইন
Texas Instruments
📦 16-SOIC
2/2 RS-232 line driver and receiver · 3 V to 5.5 V · 250 kbit/s · 2 · 2 · ±15 kV · 300 µA · 5 V logic

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MAX3222CWE+

✅ ড্রপ-ইন
📦 16-SOIC
Same 16-pin RS-232 transceiver class and single-supply topology; compared with the MAX3232EIDWG4, channel count differs by 0 and supply range differs by 0 V, but ESD and detailed pin-level limits require verification.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MAX3232EIDWG4 বিশেষণ

Product Type RS-232 line driver and receiver transceiver
Number of Drivers 2
Number of Receivers 2
Logic Compatibility CMOS/TTL logic levels
Supply Voltage Range 3 V to 5.5 V
RS-232 Interface Full-duplex RS-232
ESD Protection ±15 kV IEC ESD protection
অপারেটিং তাপমাত্রার পরিসর −40 °C to +85 °C
প্যাকেজ 16-pin SOIC
Package Width 7.50 mm
মাউন্টিং টাইপ Surface mount
পিনের সংখ্যা 16 pins
Supply Configuration Single 3 V to 5.5 V supply
Charge-Pump Architecture Integrated dual charge-pump circuitry

MAX3232EIDWG4 7.50 mm পিন কনফিগারেশন গাইড

MAX3232EIDWG4 (7.50 mm প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

MAX3232EIDWG4-এর জন্য 7.50 mm প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MAX3232EIDWG4.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

MAX3232EIDWG4 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial RS-232 Controller, Point-of-Sale Terminal Interface, Test and Measurement Equipment, Computer Peripheral Connectivity, Embedded Service Port, Legacy Equipment Upgrade.

🏭

Industrial RS-232 Controller

The MAX3232EIDWG4 fits industrial serial controllers that need a reliable logic-to-RS-232 interface at 3.3 V or 5 V. Its two drivers and two receivers support full-duplex communication, while the 3 V to 5.5 V supply range accommodates both 3.3 V microcontrollers and 5 V control logic. The specified −40 °C to +85 °C temperature range covers extended industrial conditions. Place the interface near the connector and observe the charge-pump capacitor layout from the manufacturer datasheet. Its ±15 kV IEC ESD protection adds useful margin at an exposed serial port, although the enclosure, cable, and grounding strategy remain part of the overall surge-protection design.

📺

Point-of-Sale Terminal Interface

The MAX3232EIDWG4 is suitable for point-of-sale equipment requiring a compact RS-232 port alongside a 3.3 V processor. Two driver and receiver channels allow bidirectional service communication or connection to more than one legacy peripheral without adding separate transceiver ICs. The 16-pin SOIC package simplifies surface-mount assembly, and ±15 kV IEC ESD protection is valuable when customer-facing cables connect to external equipment. Designers should keep the RS-232 traces separated from display, Ethernet, and power-converter nodes, connect the supply bypass capacitor close to VCC, and follow the datasheet's charge-pump capacitor values and placement guidance.

🔧

Test and Measurement Equipment

The MAX3232EIDWG4 can connect a modern instrument controller to legacy RS-232 test equipment through its two-driver, two-receiver arrangement. The 3 V to 5.5 V operating range allows the interface to share either 3.3 V or 5 V control rails, and the −40 °C to +85 °C range supports use across laboratory and industrial test environments. The integrated ±15 kV IEC ESD protection is useful for frequently connected service ports. For reliable measurements, terminate the ground conductor properly, route driver and receiver nets away from sensitive analog traces, and place the external charge-pump capacitors at the pins indicated in the manufacturer application circuit.

🖥️

Computer Peripheral Connectivity

The MAX3232EIDWG4 provides a compact interface for legacy computer peripherals, service consoles, and configuration ports that still use RS-232. A single 3 V to 5.5 V supply simplifies adaptation to both older 5 V systems and newer 3.3 V controllers, while the dual-channel implementation supports bidirectional command and data paths. Its 16-pin SOIC package permits placement close to the connector, which reduces susceptibility to noise picked up by long unprotected traces. Use a solid chassis or logic ground strategy, observe the datasheet's ESD layout, and avoid placing the RS-232 traces parallel to switching-converter or high-speed clock nets.

🔧

Embedded Service Port

The MAX3232EIDWG4 is appropriate for an embedded system that exposes a service or configuration port using the widely deployed RS-232 standard. Two drivers and two receivers provide flexibility for command ports, firmware download functions, and diagnostic links, and the 3 V to 5.5 V range supports common embedded processor rails. The ±15 kV IEC ESD protection helps the port withstand electrostatic discharge encountered during field servicing. Keep the connector-side routing compact, use the recommended charge-pump capacitors, provide local supply bypassing, and check that the external connector's signal and ground assignments match the device pin functions in the manufacturer datasheet.

⚡

Legacy Equipment Upgrade

The MAX3232EIDWG4 enables modern controllers to communicate with legacy RS-232 equipment without preserving obsolete logic-side supply levels. A 3.3 V controller can operate alongside the interface through the device's 3 V to 5.5 V supply range, and the dual-channel configuration can support both control and status connections. The enhanced E-family ESD rating provides ±15 kV IEC protection for exposed equipment connections. Confirm that the legacy system uses true RS-232 bipolar levels rather than RS-422, RS-485, or a proprietary serial protocol, and verify pin-level behavior before using the MAX3232EIDWG4 as a drop-in replacement.

What is the MAX3232EIDWG4?
The MAX3232EIDWG4 is a Texas Instruments dual RS-232 transceiver containing two line drivers and two receivers. It operates from a 3 V to 5.5 V supply, supports full-duplex RS-232 communication, provides ±15 kV IEC ESD protection, and is packaged in a 16-pin SOIC. According to the manufacturer datasheet, it is intended for bridging CMOS/TTL logic systems and RS-232 serial interfaces.
What are the key specifications of MAX3232EIDWG4?
The MAX3232EIDWG4 provides two RS-232 drivers, two receivers, a 3 V to 5.5 V operating range, and ±15 kV IEC ESD protection in a 16-pin SOIC package. Its specified temperature range is −40 °C to +85 °C. According to the Texas Instruments datasheet, the device also uses integrated charge-pump circuitry to support the positive and negative RS-232 voltage levels from a single logic-side supply.
Where can I download the MAX3232EIDWG4 datasheet PDF?
The MAX3232EIDWG4 datasheet PDF is available from the Texas Instruments listing for the MAX3232E family. It describes the electrical characteristics, charge-pump capacitor connections, ESD ratings, pin functions, and recommended application layout. Use the pin-description table and application circuit in the manufacturer datasheet when assigning PCB nets and selecting the external charge-pump capacitors.
Where is the MAX3232EIDWG4 pinout?
The MAX3232EIDWG4 pinout is documented in the pin-description table of the Texas Instruments datasheet. The device uses a 16-pin SOIC package with driver outputs, receiver inputs, charge-pump nodes, supply, ground, and enable-related functions assigned to specific pins. Assign every PCB net from that table rather than inferring pin functions from another 16-pin RS-232 device.
Can MAX3232EIDWG4 operate from a 3.3 V supply?
Yes, the MAX3232EIDWG4 can operate from a 3.3 V supply because its specified input-voltage range is 3 V to 5.5 V. According to the manufacturer datasheet, the integrated charge-pump circuitry generates the voltage levels required for RS-232 transmission while the logic interface remains compatible with 3.3 V systems. Confirm signal-level limits and timing margins against the applicable operating conditions.
What is the MAX3232EIDWG4 used for?
The MAX3232EIDWG4 is used to connect CMOS/TTL digital logic to an RS-232 serial port. Typical uses include industrial controllers, test equipment, computer peripherals, point-of-sale terminals, and embedded service interfaces. Its two drivers and two receivers support full-duplex or multi-port RS-232 arrangements, while ±15 kV IEC ESD protection strengthens the external interface.
MAX3232EIDWG4 vs MAX3232IPW - which is better?
The MAX3232EIDWG4 is the enhanced ESD version of the MAX3232 family and is rated for ±15 kV IEC ESD protection. The MAX3232IPW also appears in the manufacturer family comparison and uses the same 16-pin SOIC format, but its ordering suffix identifies a different package and temperature-grade configuration. Choose the exact ordering code required by your production BOM and confirm that all pin functions match.
What is the difference between MAX3232EIDWG4 and MAX3232EIDR?
The MAX3232EIDWG4 and MAX3232EIDR belong to the same MAX3232E 16-pin SOIC family and can serve as pin-compatible alternatives. The principal ordering distinction is the package/reel or shipping code associated with the final suffix. Before substitution, verify the manufacturer's ordering information, temperature grade, pin assignment, ESD rating, and the quantity and form of the incoming components.
What is the best drop-in replacement for MAX3232EIDWG4?
The MAX3232EIDR is the closest same-family drop-in candidate identified in the manufacturer family comparison because it uses the same 16-pin SOIC device family and MAX3232E electrical function. Other identified 16-pin options include MAX3232IPW, MAX3232ECDW, and MAX3222CWE+. No replacement should be approved solely from package appearance; verify pin functions, supply range, temperature grade, ESD rating, and transmit/receive performance.
Can MAX3222CWE+ replace MAX3232EIDWG4?
The MAX3222CWE+ may be considered for a board-review replacement because it is identified as a 16-pin MAX3222-family alternative, but it should not be treated as a confirmed drop-in without a pin-by-pin comparison. The MAX3232EIDWG4 specifically offers two drivers, two receivers, 3 V to 5.5 V operation, and ±15 kV IEC ESD protection. Compare enable polarity, charge-pump pins, failure-mode behavior, and timing before substitution.
When should I choose MAX3232EIDWG4 over MAX3232IPW?
Choose the MAX3232EIDWG4 when the design requires the enhanced MAX3232E family with ±15 kV IEC ESD protection and the exact G4 ordering configuration. The MAX3232IPW is a 16-pin family alternative that may be considered for a different qualification or sourcing configuration. Confirm the required temperature range and manufacturer ordering code before deciding, because ESD ratings and ordering suffixes materially affect suitability.
Is MAX3232EIDWG4 suitable for industrial RS-232 equipment?
The MAX3232EIDWG4 is suitable for many industrial RS-232 interfaces because it supports a −40 °C to +85 °C operating range, a 3 V to 5.5 V supply, and ±15 kV IEC ESD protection. According to the manufacturer datasheet, the 16-pin SOIC package supports surface-mount assembly. Actual industrial suitability also depends on the enclosure, isolation, transient environment, and cable length.
Does MAX3232EIDWG4 need an external negative supply?
No external negative supply is required. The MAX3232EIDWG4 uses integrated charge-pump circuitry to generate the bipolar voltage swing needed for RS-232 transmission from its 3 V to 5.5 V supply. The manufacturer datasheet specifies the required external charge-pump capacitors and their connections. Place those capacitors close to the designated pins and follow the recommended layout to maintain stable operation.
Where can I buy MAX3232EIDWG4 and check current lead time?
Use the Request a Quote form on this page to request the current price, stock position, lead time, and minimum order quantity for the MAX3232EIDWG4. The exact 16-pin SOIC ordering code is important when requesting a quotation because MAX3232 family members use different suffix combinations. Confirm the manufacturer, package, temperature range, and reel quantity on the quotation request.
What is the price of MAX3232EIDWG4?
The current price of the MAX3232EIDWG4 is obtained through the Request a Quote form on this page. Quote requests should identify the exact MPN MAX3232EIDWG4, the required reel quantity, and the destination country or delivery region. This avoids ambiguity with other MAX3232 family members that have similar electrical functions but different package or ordering suffixes.
Is MAX3232EIDWG4 in stock?
Current inventory status for the MAX3232EIDWG4 should be confirmed through the Request a Quote form on this page. Include the desired quantity and packaging configuration in the request. Because multiple MAX3232 devices use similar 16-pin SOIC packages but have different suffix codes, request the full MAX3232EIDWG4 MPN rather than relying only on the base family name.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MAX3232EIDWG4 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the MAX3232EIDWG4 when a new design needs a 16-pin SOIC RS-232 interface operating from 3.3 V or 5 V, two drivers and two receivers, and an explicitly specified ±15 kV IEC ESD rating. Its enhanced MAX3232E positioning makes it appropriate for exposed service and industrial connector ports. The MAX3232EIDR is the closest same-family candidate for a controlled production substitution after checking ordering and temperature details. Consider the MAX3232IPW when its specific ordering configuration meets the required qualification and sourcing plan. The MAX3232ECDW and MAX3232ID remain same-footprint family candidates, but their ESD and temperature details must be compared with the target. MAX3222CWE+ can be evaluated for legacy upgrades, yet a pin-by-pin and transient-performance review is required. For every candidate, verify supply range, enable behavior, charge-pump connections, channel direction, ESD rating, temperature grade, and connector-side layout before releasing a substitution.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য MAX3232EIDR MAX3232IPW MAX3232ECDW MAX3232ID MAX3222CWE+
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Maxim Integrated
Package 16-SOIC 16-SOIC - same 16-SOIC - same 16-SOIC - same 16-SOIC - same 16-SOIC - same
Product Type Dual RS-232 transceiver MAX3232E RS-232 transceiver Multichannel RS-232 line driver/receiver Multichannel RS-232 line driver/receiver MAX3232 RS-232 transceiver RS-232 line driver/receiver
Number of Pins 16 pins 16 pins 16 pins 16 pins 16 pins 16 pins
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount Surface mount

মূল পার্থক্যসমূহ

  • Enhanced IEC ESD protection in the MAX3232E family (বনামMAX3232ID)
  • Direct same-family packaging alternative (বনামMAX3232EIDR)
  • Single supply supports both common logic rails (বনামMAX3222CWE+)

ডিজাইন নোট

Place the MAX3232EIDWG4 near the RS-232 connector and keep the driver and receiver traces short. Follow the manufacturer application circuit for the charge-pump capacitor values, connection nodes, and VCC bypass capacitor. A short return-path ground connection to the connector shield or chassis is important when the cable leaves the enclosure. Do not route RS-232 nets beneath switching regulators, crystals, high-speed clock lines, or sensitive analog inputs.

Do not substitute a MAX3232 family member based only on the 16-pin SOIC outline. Confirm every pin function, enable polarity, charge-pump node, driver output, receiver input, supply range, temperature grade, and ESD rating. The MAX3232EIDWG4 is specifically identified for ±15 kV IEC ESD protection; using a non-E variant may remove that specification even when the PCB footprint appears identical.

Treat the RS-232 connector as an electromagnetic and electrostatic-discharge entry point. Route input and output conductors away from board edges and switching nodes, use a low-impedance ground reference, and place protection or filtering components directly at the connector when additional protection is required. Keep logic-side UART traces away from the charge-pump and connector-side nets to prevent switching transients from coupling into the host controller.

Use the package pin-description table from the manufacturer datasheet for every PCB net, including the exposed relationships of the 16-pin SOIC. Maintain the specified capacitor placement and keep loop area around the charge-pump network small. Because this interface supports a 3 V to 5.5 V supply, verify that the selected bypass capacitor has adequate DC-bias derating at 3.3 V and sufficient effective capacitance for the required UART data rate.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The manufacturer datasheet identifies ±15 kV IEC ESD protection, but separate RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive-qualification statements require confirmation from the current manufacturer product documentation.

ডেটা যাচাই করা হয়েছে: 2026-11-09 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

MAX3232EIDWG4 datasheet MAX3232EIDWG4 datasheet pdf MAX3232EIDWG4 pinout MAX3232EIDWG4 specifications MAX3232EIDWG4 16-SOIC MAX3232EIDWG4 price MAX3232EIDWG4 stock Texas Instruments MAX3232EIDWG4 MAX3232EIDWG4 equivalent MAX3232EIDWG4 replacement MAX3232EIDWG4 cross reference MAX3232EIDWG4 vs MAX3232IPW MAX3232EIDWG4 vs MAX3222CWE+ MAX3232EIDWG4 application circuit MAX3232EIDWG4 RS-232 application

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments MAX3232EIDWG4 MAX3232EIDR MAX3232IPW MAX3232ECDW MAX3232ID MAX3222CWE+ RS-232 RS-232 transceiver line driver line receiver interface IC CMOS logic TTL logic charge-pump circuit IEC ESD protection 3 V to 5.5 V supply 16-SOIC SOIC package surface-mount technology industrial RS-232 point-of-sale equipment test and measurement equipment embedded service port UART
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন