MAX3232EIDWG4 - Dual RS-232 IC | Texas Instruments
MPN: MAX3232EIDWG4 ✓ פעילMAX3232EIDWG4 סקירה
An RS-232 interface transceiver is a semiconductor that bridges the voltage-domain difference between digital logic and the bipolar RS-232 serial interface. The MAX3232EIDWG4 belongs to the interface IC hierarchy, where a transceiver integrates one or more line drivers and receivers with charge-pump circuitry and electrostatic-discharge protection. It is commonly placed between a microcontroller UART and an external serial connector.
Key features include two driver and two receiver channels, operation from 3 V to 5.5 V, and ±15 kV IEC ESD protection. The E suffix identifies the enhanced ESD-capable family, while the G4 ordering code denotes the green, standard industrial-temperature version associated with a −40 °C to +85 °C operating range. The 16-pin SOIC package supports conventional surface-mount assembly and is compatible with automated PCB production.
The MAX3232E uses on-chip charge-pump circuitry to generate the positive and negative voltage swings required by RS-232 without a negative supply input. This architecture allows the logic side to operate from a single 3 V to 5.5 V rail. The interface includes integrated protection for external connector signals, reducing the need for separate low-capacitance TVS devices when the board layout and routing follow the manufacturer's recommendations.
Typical applications include industrial serial controllers, test and measurement equipment, computer peripherals, point-of-sale terminals, embedded service ports, and legacy RS-232 equipment connected to modern microcontrollers. The dual-channel arrangement is useful when one system must support bidirectional communication, multiple RS-232 devices, or separate transmit and receive data paths.
PCB design should place the device near the RS-232 connector, route driver outputs and receiver inputs away from sensitive logic, and connect the charge-pump capacitors and supply-decoupling capacitor close to their specified pins. Keep unprotected external leads short and follow the datasheet's ESD layout guidance so that system-level transient performance is not limited by long copper traces.
This product page combines the exact ordering information, electrical limits, interface characteristics, package details, drop-in alternatives, comparison parameters, and practical PCB guidance needed to evaluate and implement the MAX3232EIDWG4 in a new design.
חלופות תחליף ישיר עבור MAX3232EIDWG4 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם MAX3232EIDWG4 (אותו גורם צורה וטביעת רגל) — שונים ב ESD Protection, Product Type, Package, Supply Voltage Range, Number of Receivers.
MAX3232EIDR
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←MAX3232IPW
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←MAX3232ECDW
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←MAX3232ID
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←MAX3222CWE+
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
MAX3232EIDWG4 מפרטים
| Product Type | RS-232 line driver and receiver transceiver |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Logic Compatibility | CMOS/TTL logic levels |
| Supply Voltage Range | 3 V to 5.5 V |
| RS-232 Interface | Full-duplex RS-232 |
| ESD Protection | ±15 kV IEC ESD protection |
| טווח טמפרטורת פעולה | −40 °C to +85 °C |
| מארז | 16-pin SOIC |
| Package Width | 7.50 mm |
| סוג הרכבה | Surface mount |
| מספר פינים | 16 pins |
| Supply Configuration | Single 3 V to 5.5 V supply |
| Charge-Pump Architecture | Integrated dual charge-pump circuitry |
מדריך תצורת פינים של MAX3232EIDWG4 7.50 mm
תצורת פינים עבור MAX3232EIDWG4 (מארזת 7.50 mm). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור MAX3232EIDWG4.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
MAX3232EIDWG4 מתאים עבור 6 יישוםs: Industrial RS-232 Controller, Point-of-Sale Terminal Interface, Test and Measurement Equipment, Computer Peripheral Connectivity, Embedded Service Port, Legacy Equipment Upgrade.
Industrial RS-232 Controller
The MAX3232EIDWG4 fits industrial serial controllers that need a reliable logic-to-RS-232 interface at 3.3 V or 5 V. Its two drivers and two receivers support full-duplex communication, while the 3 V to 5.5 V supply range accommodates both 3.3 V microcontrollers and 5 V control logic. The specified −40 °C to +85 °C temperature range covers extended industrial conditions. Place the interface near the connector and observe the charge-pump capacitor layout from the manufacturer datasheet. Its ±15 kV IEC ESD protection adds useful margin at an exposed serial port, although the enclosure, cable, and grounding strategy remain part of the overall surge-protection design.
מומלץ
Point-of-Sale Terminal Interface
The MAX3232EIDWG4 is suitable for point-of-sale equipment requiring a compact RS-232 port alongside a 3.3 V processor. Two driver and receiver channels allow bidirectional service communication or connection to more than one legacy peripheral without adding separate transceiver ICs. The 16-pin SOIC package simplifies surface-mount assembly, and ±15 kV IEC ESD protection is valuable when customer-facing cables connect to external equipment. Designers should keep the RS-232 traces separated from display, Ethernet, and power-converter nodes, connect the supply bypass capacitor close to VCC, and follow the datasheet's charge-pump capacitor values and placement guidance.
מומלץ
Test and Measurement Equipment
The MAX3232EIDWG4 can connect a modern instrument controller to legacy RS-232 test equipment through its two-driver, two-receiver arrangement. The 3 V to 5.5 V operating range allows the interface to share either 3.3 V or 5 V control rails, and the −40 °C to +85 °C range supports use across laboratory and industrial test environments. The integrated ±15 kV IEC ESD protection is useful for frequently connected service ports. For reliable measurements, terminate the ground conductor properly, route driver and receiver nets away from sensitive analog traces, and place the external charge-pump capacitors at the pins indicated in the manufacturer application circuit.
מומלץ
Computer Peripheral Connectivity
The MAX3232EIDWG4 provides a compact interface for legacy computer peripherals, service consoles, and configuration ports that still use RS-232. A single 3 V to 5.5 V supply simplifies adaptation to both older 5 V systems and newer 3.3 V controllers, while the dual-channel implementation supports bidirectional command and data paths. Its 16-pin SOIC package permits placement close to the connector, which reduces susceptibility to noise picked up by long unprotected traces. Use a solid chassis or logic ground strategy, observe the datasheet's ESD layout, and avoid placing the RS-232 traces parallel to switching-converter or high-speed clock nets.
מומלץ
Embedded Service Port
The MAX3232EIDWG4 is appropriate for an embedded system that exposes a service or configuration port using the widely deployed RS-232 standard. Two drivers and two receivers provide flexibility for command ports, firmware download functions, and diagnostic links, and the 3 V to 5.5 V range supports common embedded processor rails. The ±15 kV IEC ESD protection helps the port withstand electrostatic discharge encountered during field servicing. Keep the connector-side routing compact, use the recommended charge-pump capacitors, provide local supply bypassing, and check that the external connector's signal and ground assignments match the device pin functions in the manufacturer datasheet.
מומלץ
Legacy Equipment Upgrade
The MAX3232EIDWG4 enables modern controllers to communicate with legacy RS-232 equipment without preserving obsolete logic-side supply levels. A 3.3 V controller can operate alongside the interface through the device's 3 V to 5.5 V supply range, and the dual-channel configuration can support both control and status connections. The enhanced E-family ESD rating provides ±15 kV IEC protection for exposed equipment connections. Confirm that the legacy system uses true RS-232 bipolar levels rather than RS-422, RS-485, or a proprietary serial protocol, and verify pin-level behavior before using the MAX3232EIDWG4 as a drop-in replacement.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור MAX3232EIDWG4 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | MAX3232EIDR | MAX3232IPW | MAX3232ECDW | MAX3232ID | MAX3222CWE+ |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Maxim Integrated |
| Package | 16-SOIC | 16-SOIC - same | 16-SOIC - same | 16-SOIC - same | 16-SOIC - same | 16-SOIC - same |
| Product Type | Dual RS-232 transceiver | MAX3232E RS-232 transceiver | Multichannel RS-232 line driver/receiver | Multichannel RS-232 line driver/receiver | MAX3232 RS-232 transceiver | RS-232 line driver/receiver |
| Number of Pins | 16 pins | 16 pins | 16 pins | 16 pins | 16 pins | 16 pins |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
מבדילים עיקריים
- Enhanced IEC ESD protection in the MAX3232E family (לעומתMAX3232ID)
- Direct same-family packaging alternative (לעומתMAX3232EIDR)
- Single supply supports both common logic rails (לעומתMAX3222CWE+)
הערות תכנון
Place the MAX3232EIDWG4 near the RS-232 connector and keep the driver and receiver traces short. Follow the manufacturer application circuit for the charge-pump capacitor values, connection nodes, and VCC bypass capacitor. A short return-path ground connection to the connector shield or chassis is important when the cable leaves the enclosure. Do not route RS-232 nets beneath switching regulators, crystals, high-speed clock lines, or sensitive analog inputs.
Do not substitute a MAX3232 family member based only on the 16-pin SOIC outline. Confirm every pin function, enable polarity, charge-pump node, driver output, receiver input, supply range, temperature grade, and ESD rating. The MAX3232EIDWG4 is specifically identified for ±15 kV IEC ESD protection; using a non-E variant may remove that specification even when the PCB footprint appears identical.
Treat the RS-232 connector as an electromagnetic and electrostatic-discharge entry point. Route input and output conductors away from board edges and switching nodes, use a low-impedance ground reference, and place protection or filtering components directly at the connector when additional protection is required. Keep logic-side UART traces away from the charge-pump and connector-side nets to prevent switching transients from coupling into the host controller.
Use the package pin-description table from the manufacturer datasheet for every PCB net, including the exposed relationships of the 16-pin SOIC. Maintain the specified capacitor placement and keep loop area around the charge-pump network small. Because this interface supports a 3 V to 5.5 V supply, verify that the selected bypass capacitor has adequate DC-bias derating at 3.3 V and sufficient effective capacitance for the required UART data rate.
מידע על תאימות
The manufacturer datasheet identifies ±15 kV IEC ESD protection, but separate RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive-qualification statements require confirmation from the current manufacturer product documentation.