MAX3232EIDWG4 - Dual RS-232 IC | Texas Instruments
MPN: MAX3232EIDWG4 ✓ NakahandaMAX3232EIDWG4 Ulas
An RS-232 interface transceiver is a semiconductor that bridges the voltage-domain difference between digital logic and the bipolar RS-232 serial interface. The MAX3232EIDWG4 belongs to the interface IC hierarchy, where a transceiver integrates one or more line drivers and receivers with charge-pump circuitry and electrostatic-discharge protection. It is commonly placed between a microcontroller UART and an external serial connector.
Key features include two driver and two receiver channels, operation from 3 V to 5.5 V, and ±15 kV IEC ESD protection. The E suffix identifies the enhanced ESD-capable family, while the G4 ordering code denotes the green, standard industrial-temperature version associated with a −40 °C to +85 °C operating range. The 16-pin SOIC package supports conventional surface-mount assembly and is compatible with automated PCB production.
The MAX3232E uses on-chip charge-pump circuitry to generate the positive and negative voltage swings required by RS-232 without a negative supply input. This architecture allows the logic side to operate from a single 3 V to 5.5 V rail. The interface includes integrated protection for external connector signals, reducing the need for separate low-capacitance TVS devices when the board layout and routing follow the manufacturer's recommendations.
Typical applications include industrial serial controllers, test and measurement equipment, computer peripherals, point-of-sale terminals, embedded service ports, and legacy RS-232 equipment connected to modern microcontrollers. The dual-channel arrangement is useful when one system must support bidirectional communication, multiple RS-232 devices, or separate transmit and receive data paths.
PCB design should place the device near the RS-232 connector, route driver outputs and receiver inputs away from sensitive logic, and connect the charge-pump capacitors and supply-decoupling capacitor close to their specified pins. Keep unprotected external leads short and follow the datasheet's ESD layout guidance so that system-level transient performance is not limited by long copper traces.
This product page combines the exact ordering information, electrical limits, interface characteristics, package details, drop-in alternatives, comparison parameters, and practical PCB guidance needed to evaluate and implement the MAX3232EIDWG4 in a new design.
Mga alternatibo na pwedeng ilagay na MAX3232EIDWG4 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok MAX3232EIDWG4 (parehas na form factor at footprint) — pagkakaiba sa ESD Protection, Product Type, Package, Supply Voltage Range, Number of Receivers.
MAX3232EIDR
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →MAX3232IPW
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →MAX3232ECDW
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →MAX3232ID
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →MAX3222CWE+
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MAX3232EIDWG4 Mga Spesipikasyon
| Product Type | RS-232 line driver and receiver transceiver |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Logic Compatibility | CMOS/TTL logic levels |
| Supply Voltage Range | 3 V to 5.5 V |
| RS-232 Interface | Full-duplex RS-232 |
| ESD Protection | ±15 kV IEC ESD protection |
| Hanay ng Temperature na Operasyon | −40 °C to +85 °C |
| Packhaging | 16-pin SOIC |
| Package Width | 7.50 mm |
| Uri ng Pagpapasok | Surface mount |
| Bilang ng Pins | 16 pins |
| Supply Configuration | Single 3 V to 5.5 V supply |
| Charge-Pump Architecture | Integrated dual charge-pump circuitry |
Gabay sa Pin Configuration ng MAX3232EIDWG4 7.50 mm
Pin configuration para sa MAX3232EIDWG4 (7.50 mm package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa MAX3232EIDWG4.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
MAX3232EIDWG4 ay nararapat para sa 6 aplikasyons: Industrial RS-232 Controller, Point-of-Sale Terminal Interface, Test and Measurement Equipment, Computer Peripheral Connectivity, Embedded Service Port, Legacy Equipment Upgrade.
Industrial RS-232 Controller
The MAX3232EIDWG4 fits industrial serial controllers that need a reliable logic-to-RS-232 interface at 3.3 V or 5 V. Its two drivers and two receivers support full-duplex communication, while the 3 V to 5.5 V supply range accommodates both 3.3 V microcontrollers and 5 V control logic. The specified −40 °C to +85 °C temperature range covers extended industrial conditions. Place the interface near the connector and observe the charge-pump capacitor layout from the manufacturer datasheet. Its ±15 kV IEC ESD protection adds useful margin at an exposed serial port, although the enclosure, cable, and grounding strategy remain part of the overall surge-protection design.
Inirekomenda
Point-of-Sale Terminal Interface
The MAX3232EIDWG4 is suitable for point-of-sale equipment requiring a compact RS-232 port alongside a 3.3 V processor. Two driver and receiver channels allow bidirectional service communication or connection to more than one legacy peripheral without adding separate transceiver ICs. The 16-pin SOIC package simplifies surface-mount assembly, and ±15 kV IEC ESD protection is valuable when customer-facing cables connect to external equipment. Designers should keep the RS-232 traces separated from display, Ethernet, and power-converter nodes, connect the supply bypass capacitor close to VCC, and follow the datasheet's charge-pump capacitor values and placement guidance.
Inirekomenda
Test and Measurement Equipment
The MAX3232EIDWG4 can connect a modern instrument controller to legacy RS-232 test equipment through its two-driver, two-receiver arrangement. The 3 V to 5.5 V operating range allows the interface to share either 3.3 V or 5 V control rails, and the −40 °C to +85 °C range supports use across laboratory and industrial test environments. The integrated ±15 kV IEC ESD protection is useful for frequently connected service ports. For reliable measurements, terminate the ground conductor properly, route driver and receiver nets away from sensitive analog traces, and place the external charge-pump capacitors at the pins indicated in the manufacturer application circuit.
Inirekomenda
Computer Peripheral Connectivity
The MAX3232EIDWG4 provides a compact interface for legacy computer peripherals, service consoles, and configuration ports that still use RS-232. A single 3 V to 5.5 V supply simplifies adaptation to both older 5 V systems and newer 3.3 V controllers, while the dual-channel implementation supports bidirectional command and data paths. Its 16-pin SOIC package permits placement close to the connector, which reduces susceptibility to noise picked up by long unprotected traces. Use a solid chassis or logic ground strategy, observe the datasheet's ESD layout, and avoid placing the RS-232 traces parallel to switching-converter or high-speed clock nets.
Inirekomenda
Embedded Service Port
The MAX3232EIDWG4 is appropriate for an embedded system that exposes a service or configuration port using the widely deployed RS-232 standard. Two drivers and two receivers provide flexibility for command ports, firmware download functions, and diagnostic links, and the 3 V to 5.5 V range supports common embedded processor rails. The ±15 kV IEC ESD protection helps the port withstand electrostatic discharge encountered during field servicing. Keep the connector-side routing compact, use the recommended charge-pump capacitors, provide local supply bypassing, and check that the external connector's signal and ground assignments match the device pin functions in the manufacturer datasheet.
Inirekomenda
Legacy Equipment Upgrade
The MAX3232EIDWG4 enables modern controllers to communicate with legacy RS-232 equipment without preserving obsolete logic-side supply levels. A 3.3 V controller can operate alongside the interface through the device's 3 V to 5.5 V supply range, and the dual-channel configuration can support both control and status connections. The enhanced E-family ESD rating provides ±15 kV IEC protection for exposed equipment connections. Confirm that the legacy system uses true RS-232 bipolar levels rather than RS-422, RS-485, or a proprietary serial protocol, and verify pin-level behavior before using the MAX3232EIDWG4 as a drop-in replacement.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for MAX3232EIDWG4 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | MAX3232EIDR | MAX3232IPW | MAX3232ECDW | MAX3232ID | MAX3222CWE+ |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Maxim Integrated |
| Package | 16-SOIC | 16-SOIC - same | 16-SOIC - same | 16-SOIC - same | 16-SOIC - same | 16-SOIC - same |
| Product Type | Dual RS-232 transceiver | MAX3232E RS-232 transceiver | Multichannel RS-232 line driver/receiver | Multichannel RS-232 line driver/receiver | MAX3232 RS-232 transceiver | RS-232 line driver/receiver |
| Number of Pins | 16 pins | 16 pins | 16 pins | 16 pins | 16 pins | 16 pins |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
Pangunahing mga Pagkakaiba
- Enhanced IEC ESD protection in the MAX3232E family (kumpara saMAX3232ID)
- Direct same-family packaging alternative (kumpara saMAX3232EIDR)
- Single supply supports both common logic rails (kumpara saMAX3222CWE+)
Talaan ng Disenyo
Place the MAX3232EIDWG4 near the RS-232 connector and keep the driver and receiver traces short. Follow the manufacturer application circuit for the charge-pump capacitor values, connection nodes, and VCC bypass capacitor. A short return-path ground connection to the connector shield or chassis is important when the cable leaves the enclosure. Do not route RS-232 nets beneath switching regulators, crystals, high-speed clock lines, or sensitive analog inputs.
Do not substitute a MAX3232 family member based only on the 16-pin SOIC outline. Confirm every pin function, enable polarity, charge-pump node, driver output, receiver input, supply range, temperature grade, and ESD rating. The MAX3232EIDWG4 is specifically identified for ±15 kV IEC ESD protection; using a non-E variant may remove that specification even when the PCB footprint appears identical.
Treat the RS-232 connector as an electromagnetic and electrostatic-discharge entry point. Route input and output conductors away from board edges and switching nodes, use a low-impedance ground reference, and place protection or filtering components directly at the connector when additional protection is required. Keep logic-side UART traces away from the charge-pump and connector-side nets to prevent switching transients from coupling into the host controller.
Use the package pin-description table from the manufacturer datasheet for every PCB net, including the exposed relationships of the 16-pin SOIC. Maintain the specified capacitor placement and keep loop area around the charge-pump network small. Because this interface supports a 3 V to 5.5 V supply, verify that the selected bypass capacitor has adequate DC-bias derating at 3.3 V and sufficient effective capacitance for the required UART data rate.
Impormasyon ng Pagsunod sa Kautusan
The manufacturer datasheet identifies ±15 kV IEC ESD protection, but separate RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive-qualification statements require confirmation from the current manufacturer product documentation.