Texas Instruments

MAX3232IDRG4 - 3.3V RS-232 Transceiver | Texas Instruments

MPN: MAX3232IDRG4 ✓ সক্রিয়
3 V to 5.5 V Vdss 16-pin SOIC Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

MAX3232IDRG4 সারাংশ

Texas Instruments MAX3232IDRG4 is a 3 V to 5.5 V RS-232 line driver and receiver IC with two transmit channels, two receive channels, operation up to 1 Mbps, and ±15 kV ESD protection, housed in a 16-pin SOIC package. It converts logic-level signals between a host or controller and RS-232-compatible equipment while operating from either 3.3 V or 5 V logic systems.

An RS-232 transceiver is an interface IC that combines differential voltage-based line drivers with receiver circuits capable of detecting RS-232 signal levels. The MAX3232 belongs to the broader interface-IC hierarchy, where transceivers connect digital logic to a physical communication standard. Its dual-driver, dual-receiver arrangement supports one RS-232 port while providing a useful balance between board area, power consumption, and peripheral count.

The principal benefits include a 3 V to 5.5 V supply range, 1 Mbps maximum data rate, and ±15 kV ESD protection. Operation from 3.3 V allows the device to interface directly with modern low-voltage controller logic without a separate 5 V logic supply. Its two receivers may also be monitored independently when the full RS-232 port is not required.

Internally, the MAX3232 uses charge-pump circuitry and external capacitors to generate the bipolar voltage needed by RS-232 line drivers. Four external charge-pump capacitors are required by the standard application arrangement. The integrated protection and voltage-generation functions reduce the number of discrete components needed for a compact RS-232 interface.

Typical uses include industrial serial consoles, programmable instrumentation, data acquisition equipment, point-of-sale terminals, and embedded systems that retain an RS-232 port. The device is especially useful when the host operates from 3.3 V while the connected peripheral still uses conventional RS-232 signaling.

Place the required charge-pump capacitors close to their associated pins and route each driver output directly toward its connector. Keep the logic-side traces short, provide a solid ground reference, and use the receiver and driver pins according to the Texas Instruments datasheet rather than inferring connections from the generic RS-232 standard.

This product page combines the exact package and electrical characteristics, sourcing guidance, functional comparisons, and practical interface-design notes needed to evaluate MAX3232IDRG4 for a new RS-232 design.

এর জন্য ড্রপ-ইন বিকল্প MAX3232IDRG4 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible MAX3232IDRG4 (একই form factor এবং footprint) — পার্থক্য রয়েছে ESD Protection, External Charge-Pump Capacitors, Maximum Data Rate, Operating Temperature, Package.

Texas Instruments
ESD Protection: ±15 kV HBM
External Charge-Pump Capacitors: 4 × 0.1 µF
Maximum Data Rate: 250 kbit/s
এর সাথে তুলনা করুন MAX3232IDRG4 →

MAX3232EIDR

✅ ড্রপ-ইন
Texas Instruments
📦 16-pin SOIC
Dual RS-232 line driver/receiver transceiver · 2 drivers · 2 receivers · 250 kbps · 3 V to 5.5 V · 3.3 V · RS-232 · ±15 kV

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MAX3232IDRE4

✅ ড্রপ-ইন
Texas Instruments
📦 16-pin SOIC
RS-232 line driver/receiver transceiver · 2 · 2 · 3 V to 5.5 V · 250 kbit/s · Full duplex · ±15 kV HBM · 4 × 0.1 µF

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MAX3232EIDRG4

✅ ড্রপ-ইন
📦 16-pin SOIC
MAX3232E improved replacement in the 16-pin SOIC tape-and-reel ordering format, with revised device details requiring datasheet review

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MAX3232IDRG4 বিশেষণ

Product Type RS-232 line driver/receiver transceiver
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 1 Mbps
Driver Channels 2 channels
Receiver Channels 2 channels
Driver and Receiver Configuration 2/2 full-duplex RS-232 transceiver
ESD Protection ±15 kV
অপারেটিং তাপমাত্রা 0°C to 70°C
প্যাকেজ 16-pin SOIC
পিন সংখ্যা 16 pins
মাউন্টিং টাইপ Surface mount
Interface Technology RS-232
Logic Supply Compatibility 3.3 V and 5 V
External Charge-Pump Capacitors 4 capacitors, 0.1 µF typical

MAX3232IDRG4 16-pin soic পিন কনফিগারেশন গাইড

MAX3232IDRG4 (16-pin soic প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

MAX3232IDRG4-এর জন্য 16-pin soic প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MAX3232IDRG4.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

MAX3232IDRG4 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Serial Console, Programmable Test Instrumentation, Point-of-Sale Terminal, Data Acquisition Equipment, Embedded Controller Communication, RS-232 Port Multiplication.

🏭

Industrial Serial Console

The MAX3232IDRG4 fits industrial serial-console designs that require a compact RS-232 port alongside a 3.3 V or 5 V controller. Its two drivers and two receivers support bidirectional communication, while the 3 V to 5.5 V operating range reduces the need for a separate 5 V logic interface. The 1 Mbps capability is more than adequate for common console baud rates. Place the four 0.1 µF charge-pump capacitors close to the device and route the RS-232 outputs toward protected connector pins.

🖥️

Programmable Test Instrumentation

MAX3232IDRG4 can connect a controller or instrument to legacy RS-232 equipment when the system still requires that physical interface. The two receive channels can support command reception and status monitoring, and the two driver channels can handle outgoing requests and responses. Its 3.3 V compatibility reduces level-conversion components in modern test systems. Keep signal returns short, provide a stable ground reference, and verify connector pin assignments before connecting external equipment.

🖥️

Point-of-Sale Terminal

The MAX3232IDRG4 is suitable for point-of-sale terminals, scanners, and payment peripherals that retain an RS-232 interface. The 2/2 channel arrangement provides a complete communications path without requiring separate driver and receiver ICs. Operating from 3 V to 5.5 V allows use with both legacy 5 V equipment and newer 3.3 V embedded controllers. Designers should protect the connector side from physical cable transients and confirm the device's ESD coverage against the actual enclosure and grounding environment.

📡

Data Acquisition Equipment

MAX3232IDRG4 can provide an RS-232 command and data link in compact data-acquisition products. Its 1 Mbps maximum rate supports common laboratory and industrial serial configurations, while the dual receiver arrangement can monitor two incoming signals when required. The broad 3 V to 5.5 V supply range accommodates controllers with different logic voltages. Maintain controlled ground routing between the logic system and interface board, and use the manufacturer-recommended capacitor arrangement to minimize charge-pump disturbance.

🔧

Embedded Controller Communication

The MAX3232IDRG4 is appropriate for embedded controllers that must communicate with RS-232 printers, scales, programmers, or service equipment. Its logic-compatible receiver outputs and 3.3 V supply support modern controller platforms, while the integrated charge-pump circuits generate the required bipolar RS-232 transmission levels. The 16-pin SOIC package limits board footprint, although careful capacitor placement and short driver traces remain essential. Confirm the controller's UART logic levels and supported baud rate during hardware validation.

🌐

RS-232 Port Multiplication

MAX3232IDRG4 can be used in systems requiring more than one RS-232 signal function on a compact board. Each device provides two driver outputs and two receiver inputs, allowing separate control, status, or data paths to share a common logic interface. Its 3 V to 5.5 V range supports mixed-voltage logic, and ±15 kV ESD protection adds interface robustness. Validate independent signals carefully because every channel requires correct pin mapping, adequate grounding, and compliance with the intended RS-232 system topology.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

MAX3232IDR Base-package transceiver option ব্যবহৃত হয়: Industrial Serial Console, Point-of-Sale Terminal, Embedded Controller Communication MAX3232EIDR Texas Instruments ব্যবহৃত হয়: Programmable Test Instrumentation, RS-232 Port Multiplication MAX3232EIDRG4 Improved same-family interface option ব্যবহৃত হয়: Data Acquisition Equipment
What is the operating voltage of MAX3232IDRG4?
The MAX3232IDRG4 operates from 3 V to 5.5 V, allowing it to serve both 3.3 V and 5 V logic systems. According to the Texas Instruments datasheet, the device combines two RS-232 drivers and two receivers in one package. This supply range makes it suitable for modern microcontrollers, programmable logic controllers, and industrial controllers whose I/O voltage may be either 3.3 V or 5 V.
How many RS-232 drivers and receivers does MAX3232IDRG4 contain?
The MAX3232IDRG4 contains two RS-232 line drivers and two line receivers. The driver channels convert CMOS/TTL-level transmit signals into RS-232 voltage levels, while the receiver channels convert incoming RS-232 levels into logic-compatible signals. This 2/2 arrangement supports a complete two-wire transmit-and-receive port when both directions are required.
What is the maximum data rate of MAX3232IDRG4?
The MAX3232IDRG4 supports data rates up to 1 Mbps. The Texas Instruments datasheet identifies it as a low-power, multichannel RS-232 transceiver using four external 0.1 µF capacitors. Actual usable rate can be lower depending on cable length, connector wiring, capacitive loading, baud-rate tolerance, and the performance of the connected equipment.
Does MAX3232IDRG4 support 3.3 V RS-232 interfaces?
Yes, the MAX3232IDRG4 supports a 3 V to 5.5 V supply range and can interface with 3.3 V controller logic. Its logic-side supply and driver supply share the specified operating range, so a 3.3 V system can avoid a separate 5 V interface rail. The external RS-232 signal levels remain bipolar and must not be confused with the 3.3 V logic-side signals.
What ESD protection does MAX3232IDRG4 provide?
The MAX3232IDRG4 provides ±15 kV ESD protection on its RS-232 interface. According to the Texas Instruments datasheet, this protection helps the transceiver withstand electrostatic discharge encountered when a cable is connected or disconnected. Protection ratings do not replace proper cable handling, grounding, enclosure design, and external surge-protection measures.
What package does MAX3232IDRG4 use?
The MAX3232IDRG4 is offered in a 16-pin SOIC package for surface-mount assembly. The DigiKey product listing identifies it as a 2/2 full-RS-232 transceiver in a 16-SOIC package. Confirm the land pattern and exposed-pad requirements against the Texas Instruments package drawing before releasing a PCB footprint.
Where can I download the MAX3232IDRG4 datasheet PDF?
The MAX3232IDRG4 datasheet PDF is available through the Texas Instruments document links and the listed datasheet repositories. The manufacturer datasheet is the preferred source for the pin description, recommended charge-pump capacitor values, electrical characteristics, and package drawing. Use the exact MAX3232IDRG4 ordering code when reviewing the final device variant.
Where can I find the MAX3232IDRG4 pinout?
The MAX3232IDRG4 pinout is defined by the Texas Instruments datasheet and its 16-pin SOIC package drawing. Assign PCB tracks by following the numbered pin-description table and the physical pin-1 orientation rather than relying on another RS-232 transceiver. Pay particular attention to charge-pump capacitor pins, driver outputs, receiver inputs, and the ground connection.
What is the best drop-in replacement for MAX3232IDRG4?
The MAX3232E family is the closest documented improvement path because Texas Instruments identifies MAX3232E as an improved direct drop-in replacement for MAX3232. Compatibility still requires confirmation of the exact package suffix, temperature grade, pin assignment, supply range, and charge-pump capacitor values. Texas Instruments also recommends MAX3232E for new designs.
Can MAX3232E replace MAX3232IDRG4?
Yes, Texas Instruments identifies MAX3232E as an improved direct drop-in replacement for MAX3232. For a production substitution, select the MAX3232E ordering code that matches the 16-pin SOIC footprint and required commercial temperature range. Review any revised limit, feature, or ordering-information changes in the MAX3232E datasheet before release.
MAX3232IDRG4 vs MAX3232E: which is better for a new design?
The MAX3232E is generally the better choice for a new design because Texas Instruments recommends it as the improved replacement for MAX3232. The MAX3232IDRG4 remains appropriate when an existing 16-pin SOIC design is being maintained or its exact configuration is already qualified. Compare the specific MAX3232E suffix against the original device before treating it as interchangeable.
When should I choose MAX3232IDRG4 instead of MAX3232E?
Choose MAX3232IDRG4 when maintaining an approved design that already uses the original MAX3232 configuration or when procurement continuity specifically requires that ordering code. Choose MAX3232E for a new design because Texas Instruments recommends it as the improved direct replacement. The decision should also account for the exact package suffix, operating-temperature grade, and approved vendor list.
Is MAX3232IDRG4 suitable for industrial control and instrumentation?
The MAX3232IDRG4 is suitable for serial-console and instrument-interface designs that use RS-232 and operate within a 0°C to 70°C range. Its 3 V to 5.5 V supply, 1 Mbps capability, and ±15 kV ESD protection fit many controller and data-acquisition systems. Industrial deployments requiring extended-temperature operation should use a suitably rated ordering variant.
Where can I buy MAX3232IDRG4 and check its lead time?
Use the Request a Quote form on this page to request current availability, lead time, order quantity, and shipment options for MAX3232IDRG4. The structured listing identifies authorized purchasing channels, but live inventory and lead time remain variable. Provide the exact MPN, package suffix, target quantity, and required delivery date in the request.
What are the key specifications of MAX3232IDRG4 that engineers should know?
The key MAX3232IDRG4 specifications are a 3 V to 5.5 V supply range, two drivers, two receivers, operation up to 1 Mbps, ±15 kV ESD protection, and a 16-pin SOIC package. The Texas Instruments datasheet also specifies four external 0.1 µF capacitors for the charge-pump network. These parameters determine logic compatibility, baud-rate capability, protection, and PCB layout.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MAX3232IDRG4 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose MAX3232IDRG4 when maintaining a qualified design that uses the original MAX3232 device or when the current Texas Instruments ordering code is specifically required. It provides a 3 V to 5.5 V supply range, two drivers, two receivers, 1 Mbps operation, and ±15 kV ESD protection in a 16-pin SOIC package. Choose MAX3232EIDR or MAX3232EIDRG4 for a new design because Texas Instruments identifies MAX3232E as the improved direct replacement for MAX3232. The MAX3232IDR ordering code is useful when a non-reel base part matches the approved BOM, but suffix differences must be checked before substitution. Regardless of the selected suffix, verify pin assignment, charge-pump capacitor values, temperature grade, connector polarity, and protection requirements before production release.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য MAX3232EIDR MAX3232IDR MAX3232EIDRG4
Package 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Product Type RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver
Supply Voltage Range 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V
Driver Channels 2 2 2 2
Receiver Channels 2 2 2 2
External Charge-Pump Capacitors 4 capacitors, 0.1 µF typical 4 capacitors, 0.1 µF typical 4 capacitors, 0.1 µF typical 4 capacitors, 0.1 µF typical

মূল পার্থক্যসমূহ

  • Texas Instruments identifies the MAX3232E family as the improved direct replacement for MAX3232 (বনামMAX3232EIDR)
  • Single-package consolidation of two drivers and two receivers (বনামMAX3232IDR)
  • Supports modern low-voltage controller interfaces (বনামMAX3232EIDRG4)

ডিজাইন নোট

Place all four charge-pump capacitors close to their associated MAX3232IDRG4 pins, and keep the connections short and symmetric. Follow the capacitor type, capacitance, tolerance, and voltage rating recommended by Texas Instruments. Avoid routing driver outputs beneath the charge-pump network because high-voltage switching edges can couple into sensitive logic traces.

Keep the logic-side receiver inputs and driver inputs away from the RS-232 connector and cable-entry area. Provide a continuous ground reference between the interface IC and connector, and keep the ground return path short. Validate the layout with an oscilloscope during prototype testing because charge-pump transitions can appear on adjacent traces when grounding or capacitor placement is poor.

Do not substitute the RS-232 connector-side bipolar signals for 3.3 V or 5 V logic directly. The driver outputs and receiver inputs have different signal roles, and the external charge-pump capacitors are required for correct operation. Also verify that the 16-pin SOIC footprint matches the selected alternative rather than relying only on the number of pins.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The manufacturer datasheet identifies ±15 kV ESD protection, but separate RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from current manufacturer documentation.

ডেটা যাচাই করা হয়েছে: 2026-11-09 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

MAX3232IDRG4 datasheet MAX3232IDRG4 pinout MAX3232IDRG4 datasheet pdf MAX3232IDRG4 equivalent MAX3232IDRG4 replacement MAX3232IDRG4 cross reference MAX3232IDRG4 vs MAX3232EIDR MAX3232IDRG4 SOIC-16 footprint MAX3232IDRG4 3.3V RS-232 MAX3232IDRG4 price MAX3232IDRG4 stock Texas Instruments MAX3232IDRG4 MAX3232IDRG4 industrial serial MAX3232IDRG4 charge pump capacitors

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments MAX3232IDRG4 MAX3232IDR MAX3232EIDR MAX3232EIDRG4 RS-232 transceiver RS-232 line driver RS-232 line receiver interface IC CMOS/TTL logic charge-pump voltage converter 3.3 V logic 5 V logic SOIC-16 surface-mount package ESD protection industrial serial communication data acquisition test instrumentation point-of-sale terminal RS-232 UART
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন