MAX3232IDRG4 - 3.3V RS-232 Transceiver | Texas Instruments
부품 번호: MAX3232IDRG4 ✓ 활성MAX3232IDRG4 개요
An RS-232 transceiver is an interface IC that combines differential voltage-based line drivers with receiver circuits capable of detecting RS-232 signal levels. The MAX3232 belongs to the broader interface-IC hierarchy, where transceivers connect digital logic to a physical communication standard. Its dual-driver, dual-receiver arrangement supports one RS-232 port while providing a useful balance between board area, power consumption, and peripheral count.
The principal benefits include a 3 V to 5.5 V supply range, 1 Mbps maximum data rate, and ±15 kV ESD protection. Operation from 3.3 V allows the device to interface directly with modern low-voltage controller logic without a separate 5 V logic supply. Its two receivers may also be monitored independently when the full RS-232 port is not required.
Internally, the MAX3232 uses charge-pump circuitry and external capacitors to generate the bipolar voltage needed by RS-232 line drivers. Four external charge-pump capacitors are required by the standard application arrangement. The integrated protection and voltage-generation functions reduce the number of discrete components needed for a compact RS-232 interface.
Typical uses include industrial serial consoles, programmable instrumentation, data acquisition equipment, point-of-sale terminals, and embedded systems that retain an RS-232 port. The device is especially useful when the host operates from 3.3 V while the connected peripheral still uses conventional RS-232 signaling.
Place the required charge-pump capacitors close to their associated pins and route each driver output directly toward its connector. Keep the logic-side traces short, provide a solid ground reference, and use the receiver and driver pins according to the Texas Instruments datasheet rather than inferring connections from the generic RS-232 standard.
This product page combines the exact package and electrical characteristics, sourcing guidance, functional comparisons, and practical interface-design notes needed to evaluate MAX3232IDRG4 for a new RS-232 design.
드롭인 대체품: MAX3232IDRG4 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MAX3232IDRG4 (동일 폼 팩터 및 풋프린트) — 차이점: ESD Protection, External Charge-Pump Capacitors, Maximum Data Rate, Operating Temperature, Package.
MAX3232EIDR
✅ 드롭인가격 문의
데이터시트 보기 →MAX3232IDRE4
✅ 드롭인가격 문의
데이터시트 보기 →MAX3232EIDRG4
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MAX3232IDRG4 사양
| Product Type | RS-232 line driver/receiver transceiver |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 1 Mbps |
| Driver Channels | 2 channels |
| Receiver Channels | 2 channels |
| Driver and Receiver Configuration | 2/2 full-duplex RS-232 transceiver |
| ESD Protection | ±15 kV |
| 동작 온도 | 0°C to 70°C |
| 패키지 | 16-pin SOIC |
| 핀 수 | 16 pins |
| 실장 유형 | Surface mount |
| Interface Technology | RS-232 |
| Logic Supply Compatibility | 3.3 V and 5 V |
| External Charge-Pump Capacitors | 4 capacitors, 0.1 µF typical |
MAX3232IDRG4 16-pin soic 핀 구성 가이드
MAX3232IDRG4(16-pin soic 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: MAX3232IDRG4.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MAX3232IDRG4 적합 용도: 6 애플리케이션s: Industrial Serial Console, Programmable Test Instrumentation, Point-of-Sale Terminal, Data Acquisition Equipment, Embedded Controller Communication, RS-232 Port Multiplication.
Industrial Serial Console
The MAX3232IDRG4 fits industrial serial-console designs that require a compact RS-232 port alongside a 3.3 V or 5 V controller. Its two drivers and two receivers support bidirectional communication, while the 3 V to 5.5 V operating range reduces the need for a separate 5 V logic interface. The 1 Mbps capability is more than adequate for common console baud rates. Place the four 0.1 µF charge-pump capacitors close to the device and route the RS-232 outputs toward protected connector pins.
추천
Programmable Test Instrumentation
MAX3232IDRG4 can connect a controller or instrument to legacy RS-232 equipment when the system still requires that physical interface. The two receive channels can support command reception and status monitoring, and the two driver channels can handle outgoing requests and responses. Its 3.3 V compatibility reduces level-conversion components in modern test systems. Keep signal returns short, provide a stable ground reference, and verify connector pin assignments before connecting external equipment.
추천
Point-of-Sale Terminal
The MAX3232IDRG4 is suitable for point-of-sale terminals, scanners, and payment peripherals that retain an RS-232 interface. The 2/2 channel arrangement provides a complete communications path without requiring separate driver and receiver ICs. Operating from 3 V to 5.5 V allows use with both legacy 5 V equipment and newer 3.3 V embedded controllers. Designers should protect the connector side from physical cable transients and confirm the device's ESD coverage against the actual enclosure and grounding environment.
추천
Data Acquisition Equipment
MAX3232IDRG4 can provide an RS-232 command and data link in compact data-acquisition products. Its 1 Mbps maximum rate supports common laboratory and industrial serial configurations, while the dual receiver arrangement can monitor two incoming signals when required. The broad 3 V to 5.5 V supply range accommodates controllers with different logic voltages. Maintain controlled ground routing between the logic system and interface board, and use the manufacturer-recommended capacitor arrangement to minimize charge-pump disturbance.
추천
Embedded Controller Communication
The MAX3232IDRG4 is appropriate for embedded controllers that must communicate with RS-232 printers, scales, programmers, or service equipment. Its logic-compatible receiver outputs and 3.3 V supply support modern controller platforms, while the integrated charge-pump circuits generate the required bipolar RS-232 transmission levels. The 16-pin SOIC package limits board footprint, although careful capacitor placement and short driver traces remain essential. Confirm the controller's UART logic levels and supported baud rate during hardware validation.
추천
RS-232 Port Multiplication
MAX3232IDRG4 can be used in systems requiring more than one RS-232 signal function on a compact board. Each device provides two driver outputs and two receiver inputs, allowing separate control, status, or data paths to share a common logic interface. Its 3 V to 5.5 V range supports mixed-voltage logic, and ±15 kV ESD protection adds interface robustness. Validate independent signals carefully because every channel requires correct pin mapping, adequate grounding, and compliance with the intended RS-232 system topology.
추천
추천 제품 요약
엔지니어링 참조 데이터: MAX3232IDRG4 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MAX3232EIDR | MAX3232IDR | MAX3232EIDRG4 |
|---|---|---|---|---|
| Package | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Product Type | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V |
| Driver Channels | 2 | 2 | 2 | 2 |
| Receiver Channels | 2 | 2 | 2 | 2 |
| External Charge-Pump Capacitors | 4 capacitors, 0.1 µF typical | 4 capacitors, 0.1 µF typical | 4 capacitors, 0.1 µF typical | 4 capacitors, 0.1 µF typical |
주요 차별점
- Texas Instruments identifies the MAX3232E family as the improved direct replacement for MAX3232 (vs MAX3232EIDR)
- Single-package consolidation of two drivers and two receivers (vs MAX3232IDR)
- Supports modern low-voltage controller interfaces (vs MAX3232EIDRG4)
설계 노트
Place all four charge-pump capacitors close to their associated MAX3232IDRG4 pins, and keep the connections short and symmetric. Follow the capacitor type, capacitance, tolerance, and voltage rating recommended by Texas Instruments. Avoid routing driver outputs beneath the charge-pump network because high-voltage switching edges can couple into sensitive logic traces.
Keep the logic-side receiver inputs and driver inputs away from the RS-232 connector and cable-entry area. Provide a continuous ground reference between the interface IC and connector, and keep the ground return path short. Validate the layout with an oscilloscope during prototype testing because charge-pump transitions can appear on adjacent traces when grounding or capacitor placement is poor.
Do not substitute the RS-232 connector-side bipolar signals for 3.3 V or 5 V logic directly. The driver outputs and receiver inputs have different signal roles, and the external charge-pump capacitors are required for correct operation. Also verify that the 16-pin SOIC footprint matches the selected alternative rather than relying only on the number of pins.
규정 준수 정보
The manufacturer datasheet identifies ±15 kV ESD protection, but separate RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from current manufacturer documentation.