MAX3232IDRG4 - 3.3V RS-232 Transceiver | Texas Instruments
Артикул: MAX3232IDRG4 ✓ АктивенMAX3232IDRG4 Обзор
An RS-232 transceiver is an interface IC that combines differential voltage-based line drivers with receiver circuits capable of detecting RS-232 signal levels. The MAX3232 belongs to the broader interface-IC hierarchy, where transceivers connect digital logic to a physical communication standard. Its dual-driver, dual-receiver arrangement supports one RS-232 port while providing a useful balance between board area, power consumption, and peripheral count.
The principal benefits include a 3 V to 5.5 V supply range, 1 Mbps maximum data rate, and ±15 kV ESD protection. Operation from 3.3 V allows the device to interface directly with modern low-voltage controller logic without a separate 5 V logic supply. Its two receivers may also be monitored independently when the full RS-232 port is not required.
Internally, the MAX3232 uses charge-pump circuitry and external capacitors to generate the bipolar voltage needed by RS-232 line drivers. Four external charge-pump capacitors are required by the standard application arrangement. The integrated protection and voltage-generation functions reduce the number of discrete components needed for a compact RS-232 interface.
Typical uses include industrial serial consoles, programmable instrumentation, data acquisition equipment, point-of-sale terminals, and embedded systems that retain an RS-232 port. The device is especially useful when the host operates from 3.3 V while the connected peripheral still uses conventional RS-232 signaling.
Place the required charge-pump capacitors close to their associated pins and route each driver output directly toward its connector. Keep the logic-side traces short, provide a solid ground reference, and use the receiver and driver pins according to the Texas Instruments datasheet rather than inferring connections from the generic RS-232 standard.
This product page combines the exact package and electrical characteristics, sourcing guidance, functional comparisons, and practical interface-design notes needed to evaluate MAX3232IDRG4 for a new RS-232 design.
Аналоги без доработки для MAX3232IDRG4 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MAX3232IDRG4 (тот же форм-фактор и посадочное место) — отличается по ESD Protection, External Charge-Pump Capacitors, Maximum Data Rate, Operating Temperature, Package.
MAX3232EIDR
✅ Прямая заменаУточнить цену
Открыть даташит →MAX3232IDRE4
✅ Прямая заменаУточнить цену
Открыть даташит →MAX3232EIDRG4
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MAX3232IDRG4 Характеристики
| Product Type | RS-232 line driver/receiver transceiver |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 1 Mbps |
| Driver Channels | 2 channels |
| Receiver Channels | 2 channels |
| Driver and Receiver Configuration | 2/2 full-duplex RS-232 transceiver |
| ESD Protection | ±15 kV |
| Рабочая температура | 0°C to 70°C |
| Корпус | 16-pin SOIC |
| Число выводов | 16 pins |
| Тип монтажа | Surface mount |
| Interface Technology | RS-232 |
| Logic Supply Compatibility | 3.3 V and 5 V |
| External Charge-Pump Capacitors | 4 capacitors, 0.1 µF typical |
Руководство по цоколевке MAX3232IDRG4 в корпусе 16-pin soic
Цоколевка для MAX3232IDRG4 (корпус 16-pin soic). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.
Нет подробных данных о распиновке для MAX3232IDRG4.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
MAX3232IDRG4 подходит для 6 применениеs: Industrial Serial Console, Programmable Test Instrumentation, Point-of-Sale Terminal, Data Acquisition Equipment, Embedded Controller Communication, RS-232 Port Multiplication.
Industrial Serial Console
The MAX3232IDRG4 fits industrial serial-console designs that require a compact RS-232 port alongside a 3.3 V or 5 V controller. Its two drivers and two receivers support bidirectional communication, while the 3 V to 5.5 V operating range reduces the need for a separate 5 V logic interface. The 1 Mbps capability is more than adequate for common console baud rates. Place the four 0.1 µF charge-pump capacitors close to the device and route the RS-232 outputs toward protected connector pins.
Рекомендуется
Programmable Test Instrumentation
MAX3232IDRG4 can connect a controller or instrument to legacy RS-232 equipment when the system still requires that physical interface. The two receive channels can support command reception and status monitoring, and the two driver channels can handle outgoing requests and responses. Its 3.3 V compatibility reduces level-conversion components in modern test systems. Keep signal returns short, provide a stable ground reference, and verify connector pin assignments before connecting external equipment.
Рекомендуется
Point-of-Sale Terminal
The MAX3232IDRG4 is suitable for point-of-sale terminals, scanners, and payment peripherals that retain an RS-232 interface. The 2/2 channel arrangement provides a complete communications path without requiring separate driver and receiver ICs. Operating from 3 V to 5.5 V allows use with both legacy 5 V equipment and newer 3.3 V embedded controllers. Designers should protect the connector side from physical cable transients and confirm the device's ESD coverage against the actual enclosure and grounding environment.
Рекомендуется
Data Acquisition Equipment
MAX3232IDRG4 can provide an RS-232 command and data link in compact data-acquisition products. Its 1 Mbps maximum rate supports common laboratory and industrial serial configurations, while the dual receiver arrangement can monitor two incoming signals when required. The broad 3 V to 5.5 V supply range accommodates controllers with different logic voltages. Maintain controlled ground routing between the logic system and interface board, and use the manufacturer-recommended capacitor arrangement to minimize charge-pump disturbance.
Рекомендуется
Embedded Controller Communication
The MAX3232IDRG4 is appropriate for embedded controllers that must communicate with RS-232 printers, scales, programmers, or service equipment. Its logic-compatible receiver outputs and 3.3 V supply support modern controller platforms, while the integrated charge-pump circuits generate the required bipolar RS-232 transmission levels. The 16-pin SOIC package limits board footprint, although careful capacitor placement and short driver traces remain essential. Confirm the controller's UART logic levels and supported baud rate during hardware validation.
Рекомендуется
RS-232 Port Multiplication
MAX3232IDRG4 can be used in systems requiring more than one RS-232 signal function on a compact board. Each device provides two driver outputs and two receiver inputs, allowing separate control, status, or data paths to share a common logic interface. Its 3 V to 5.5 V range supports mixed-voltage logic, and ±15 kV ESD protection adds interface robustness. Validate independent signals carefully because every channel requires correct pin mapping, adequate grounding, and compliance with the intended RS-232 system topology.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MAX3232IDRG4 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MAX3232EIDR | MAX3232IDR | MAX3232EIDRG4 |
|---|---|---|---|---|
| Package | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Product Type | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V |
| Driver Channels | 2 | 2 | 2 | 2 |
| Receiver Channels | 2 | 2 | 2 | 2 |
| External Charge-Pump Capacitors | 4 capacitors, 0.1 µF typical | 4 capacitors, 0.1 µF typical | 4 capacitors, 0.1 µF typical | 4 capacitors, 0.1 µF typical |
Ключевые отличия
- Texas Instruments identifies the MAX3232E family as the improved direct replacement for MAX3232 (против MAX3232EIDR)
- Single-package consolidation of two drivers and two receivers (против MAX3232IDR)
- Supports modern low-voltage controller interfaces (против MAX3232EIDRG4)
Заметки по проектированию
Place all four charge-pump capacitors close to their associated MAX3232IDRG4 pins, and keep the connections short and symmetric. Follow the capacitor type, capacitance, tolerance, and voltage rating recommended by Texas Instruments. Avoid routing driver outputs beneath the charge-pump network because high-voltage switching edges can couple into sensitive logic traces.
Keep the logic-side receiver inputs and driver inputs away from the RS-232 connector and cable-entry area. Provide a continuous ground reference between the interface IC and connector, and keep the ground return path short. Validate the layout with an oscilloscope during prototype testing because charge-pump transitions can appear on adjacent traces when grounding or capacitor placement is poor.
Do not substitute the RS-232 connector-side bipolar signals for 3.3 V or 5 V logic directly. The driver outputs and receiver inputs have different signal roles, and the external charge-pump capacitors are required for correct operation. Also verify that the 16-pin SOIC footprint matches the selected alternative rather than relying only on the number of pins.
Информация о соответствии
The manufacturer datasheet identifies ±15 kV ESD protection, but separate RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from current manufacturer documentation.