MAX3232IDRG4 - 3.3V RS-232 Transceiver | Texas Instruments
MPN: MAX3232IDRG4 ✓ 啟用中MAX3232IDRG4 概覽
An RS-232 transceiver is an interface IC that combines differential voltage-based line drivers with receiver circuits capable of detecting RS-232 signal levels. The MAX3232 belongs to the broader interface-IC hierarchy, where transceivers connect digital logic to a physical communication standard. Its dual-driver, dual-receiver arrangement supports one RS-232 port while providing a useful balance between board area, power consumption, and peripheral count.
The principal benefits include a 3 V to 5.5 V supply range, 1 Mbps maximum data rate, and ±15 kV ESD protection. Operation from 3.3 V allows the device to interface directly with modern low-voltage controller logic without a separate 5 V logic supply. Its two receivers may also be monitored independently when the full RS-232 port is not required.
Internally, the MAX3232 uses charge-pump circuitry and external capacitors to generate the bipolar voltage needed by RS-232 line drivers. Four external charge-pump capacitors are required by the standard application arrangement. The integrated protection and voltage-generation functions reduce the number of discrete components needed for a compact RS-232 interface.
Typical uses include industrial serial consoles, programmable instrumentation, data acquisition equipment, point-of-sale terminals, and embedded systems that retain an RS-232 port. The device is especially useful when the host operates from 3.3 V while the connected peripheral still uses conventional RS-232 signaling.
Place the required charge-pump capacitors close to their associated pins and route each driver output directly toward its connector. Keep the logic-side traces short, provide a solid ground reference, and use the receiver and driver pins according to the Texas Instruments datasheet rather than inferring connections from the generic RS-232 standard.
This product page combines the exact package and electrical characteristics, sourcing guidance, functional comparisons, and practical interface-design notes needed to evaluate MAX3232IDRG4 for a new RS-232 design.
直接替換替代品,適用於 MAX3232IDRG4 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MAX3232IDRG4 (相同外形與佔位) — 差異在於 ESD Protection, External Charge-Pump Capacitors, Maximum Data Rate, Operating Temperature, Package.
MAX3232EIDR
✅ 直接替換聯絡詢價
查看資料表 →MAX3232IDRE4
✅ 直接替換聯絡詢價
查看資料表 →MAX3232EIDRG4
✅ 直接替換📋 參考替代品(不在目錄中)
MAX3232IDRG4 規格
| Product Type | RS-232 line driver/receiver transceiver |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 1 Mbps |
| Driver Channels | 2 channels |
| Receiver Channels | 2 channels |
| Driver and Receiver Configuration | 2/2 full-duplex RS-232 transceiver |
| ESD Protection | ±15 kV |
| 工作溫度 | 0°C to 70°C |
| 封裝 | 16-pin SOIC |
| 腳位數 | 16 pins |
| 安裝類型 | Surface mount |
| Interface Technology | RS-232 |
| Logic Supply Compatibility | 3.3 V and 5 V |
| External Charge-Pump Capacitors | 4 capacitors, 0.1 µF typical |
MAX3232IDRG4 16-pin soic 腳位配置指南
MAX3232IDRG4(16-pin soic 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: MAX3232IDRG4.
請參閱 資料表 以查看完整腳位配置。
典型應用
MAX3232IDRG4 適用於 6 應用s: Industrial Serial Console, Programmable Test Instrumentation, Point-of-Sale Terminal, Data Acquisition Equipment, Embedded Controller Communication, RS-232 Port Multiplication.
Industrial Serial Console
The MAX3232IDRG4 fits industrial serial-console designs that require a compact RS-232 port alongside a 3.3 V or 5 V controller. Its two drivers and two receivers support bidirectional communication, while the 3 V to 5.5 V operating range reduces the need for a separate 5 V logic interface. The 1 Mbps capability is more than adequate for common console baud rates. Place the four 0.1 µF charge-pump capacitors close to the device and route the RS-232 outputs toward protected connector pins.
推薦
Programmable Test Instrumentation
MAX3232IDRG4 can connect a controller or instrument to legacy RS-232 equipment when the system still requires that physical interface. The two receive channels can support command reception and status monitoring, and the two driver channels can handle outgoing requests and responses. Its 3.3 V compatibility reduces level-conversion components in modern test systems. Keep signal returns short, provide a stable ground reference, and verify connector pin assignments before connecting external equipment.
推薦
Point-of-Sale Terminal
The MAX3232IDRG4 is suitable for point-of-sale terminals, scanners, and payment peripherals that retain an RS-232 interface. The 2/2 channel arrangement provides a complete communications path without requiring separate driver and receiver ICs. Operating from 3 V to 5.5 V allows use with both legacy 5 V equipment and newer 3.3 V embedded controllers. Designers should protect the connector side from physical cable transients and confirm the device's ESD coverage against the actual enclosure and grounding environment.
推薦
Data Acquisition Equipment
MAX3232IDRG4 can provide an RS-232 command and data link in compact data-acquisition products. Its 1 Mbps maximum rate supports common laboratory and industrial serial configurations, while the dual receiver arrangement can monitor two incoming signals when required. The broad 3 V to 5.5 V supply range accommodates controllers with different logic voltages. Maintain controlled ground routing between the logic system and interface board, and use the manufacturer-recommended capacitor arrangement to minimize charge-pump disturbance.
推薦
Embedded Controller Communication
The MAX3232IDRG4 is appropriate for embedded controllers that must communicate with RS-232 printers, scales, programmers, or service equipment. Its logic-compatible receiver outputs and 3.3 V supply support modern controller platforms, while the integrated charge-pump circuits generate the required bipolar RS-232 transmission levels. The 16-pin SOIC package limits board footprint, although careful capacitor placement and short driver traces remain essential. Confirm the controller's UART logic levels and supported baud rate during hardware validation.
推薦
RS-232 Port Multiplication
MAX3232IDRG4 can be used in systems requiring more than one RS-232 signal function on a compact board. Each device provides two driver outputs and two receiver inputs, allowing separate control, status, or data paths to share a common logic interface. Its 3 V to 5.5 V range supports mixed-voltage logic, and ±15 kV ESD protection adds interface robustness. Validate independent signals carefully because every channel requires correct pin mapping, adequate grounding, and compliance with the intended RS-232 system topology.
推薦
推薦產品摘要
工程參考資料,適用於 MAX3232IDRG4 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MAX3232EIDR | MAX3232IDR | MAX3232EIDRG4 |
|---|---|---|---|---|
| Package | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Product Type | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V |
| Driver Channels | 2 | 2 | 2 | 2 |
| Receiver Channels | 2 | 2 | 2 | 2 |
| External Charge-Pump Capacitors | 4 capacitors, 0.1 µF typical | 4 capacitors, 0.1 µF typical | 4 capacitors, 0.1 µF typical | 4 capacitors, 0.1 µF typical |
主要差異化特點
- Texas Instruments identifies the MAX3232E family as the improved direct replacement for MAX3232 (對比MAX3232EIDR)
- Single-package consolidation of two drivers and two receivers (對比MAX3232IDR)
- Supports modern low-voltage controller interfaces (對比MAX3232EIDRG4)
設計說明
Place all four charge-pump capacitors close to their associated MAX3232IDRG4 pins, and keep the connections short and symmetric. Follow the capacitor type, capacitance, tolerance, and voltage rating recommended by Texas Instruments. Avoid routing driver outputs beneath the charge-pump network because high-voltage switching edges can couple into sensitive logic traces.
Keep the logic-side receiver inputs and driver inputs away from the RS-232 connector and cable-entry area. Provide a continuous ground reference between the interface IC and connector, and keep the ground return path short. Validate the layout with an oscilloscope during prototype testing because charge-pump transitions can appear on adjacent traces when grounding or capacitor placement is poor.
Do not substitute the RS-232 connector-side bipolar signals for 3.3 V or 5 V logic directly. The driver outputs and receiver inputs have different signal roles, and the external charge-pump capacitors are required for correct operation. Also verify that the 16-pin SOIC footprint matches the selected alternative rather than relying only on the number of pins.
合規資訊
The manufacturer datasheet identifies ±15 kV ESD protection, but separate RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from current manufacturer documentation.