Texas Instruments

MAX3243ECDWR - 500kbps 3-5.5V RS-232 Transceiver | Texas Instruments

MPN: MAX3243ECDWR ✓ সক্রিয়
3 V to 5.5 V Vdss 28-pin SOIC (DW) Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

MAX3243ECDWR সারাংশ

The Texas Instruments MAX3243ECDWR is a 3 V to 5.5 V multichannel RS-232 line driver and receiver supporting data rates up to 500 kbps, with ±15 kV IEC ESD protection on serial-port connection pins. The device contains three line drivers, five line receivers, and a dual charge-pump circuit, and is housed in a 28-pin SOIC (DW) package. Its specified operating temperature range is 0°C to 70°C.

An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232-compatible levels and converts incoming RS-232 signals back into logic levels. It belongs to the interface IC category and provides the physical signaling layer between an asynchronous communication controller and a serial-port connection. The MAX3243E is designed for equipment that needs multiple RS-232 channels without requiring a separate external voltage-conversion circuit.

The MAX3243ECDWR operates from a 3 V to 5.5 V supply, allowing it to work with both 3.3 V and 5 V system rails. Its internal dual charge-pump circuit supports the positive and negative voltage levels required by RS-232. According to the manufacturer datasheet, the serial-port connection pins provide ±15 kV ESD protection under HBM and IEC 61000-4-2 air-gap discharge conditions, plus ±8 kV under IEC 61000-4-2 contact discharge conditions.

The integrated charge-pump design reduces the external component count compared with an RS-232 implementation that relies on a separate external supply. Three driver channels can transmit logic signals, while five receiver channels can independently receive serial data. The device supports communication rates up to 500 kbps and meets the electrical requirements stated in the manufacturer documentation for TIA/EIA-232-F operation.

Typical uses include industrial serial-port equipment, data-collection systems, point-of-sale terminals, laboratory instrumentation, and embedded control systems. A five-receiver arrangement is useful when a system monitors several RS-232 sources, while the three-driver arrangement supports multiple outbound serial links. The 28-pin SOIC package also simplifies assembly for designs requiring a conventional surface-mount footprint.

Layout should keep charge-pump and interface routing away from sensitive analog or high-speed digital paths. Follow the manufacturer datasheet for recommended capacitor placement, serial-interface routing, and power-supply decoupling. Confirm the system ground arrangement and RS-232 connector protection requirements before finalizing a production board.

This product page organizes the key electrical ratings, package details, RS-232 interface functions, ESD levels, and application guidance for the MAX3243ECDWR. It also identifies where additional design information, such as exact package dimensions and complete pin descriptions, should be taken directly from the manufacturer documentation.

এর জন্য ড্রপ-ইন বিকল্প MAX3243ECDWR — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই পণ্যের জন্য কোনো ড্রপ-ইন বিকল্প পাওয়া যায়নি।

বিকল্প অনুরোধ করুন

MAX3243ECDWR বিশেষণ

Product Type Multichannel RS-232 line driver/receiver
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 500 kbps
Number of Line Drivers 3
Number of Line Receivers 5
Charge-Pump Configuration Dual charge-pump circuit
HBM and IEC Air-Gap ESD Protection ±15 kV
IEC 61000-4-2 Contact Discharge Protection ±8 kV
অপারেটিং তাপমাত্রার পরিসর 0°C to 70°C
প্যাকেজ 28-pin SOIC (DW)
Package Width 7.50 mm (0.295 inch)
মাউন্টিং টাইপ Surface mount
Total Pin Count 28 pins
RS-232 Compliance TIA/EIA-232-F
Interface Standard RS-232

MAX3243ECDWR 7.50 mm (0.295 inch) পিন কনফিগারেশন গাইড

MAX3243ECDWR (7.50 mm (0.295 inch) প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

MAX3243ECDWR-এর জন্য 7.50 mm (0.295 inch) প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MAX3243ECDWR.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

MAX3243ECDWR এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Serial-Port Control, Point-of-Sale Terminal, Data-Acquisition System, Laboratory Instrument Communication, Embedded Service Console, Network Equipment Management.

🏭

Industrial Serial-Port Control

The MAX3243ECDWR fits industrial controllers that need several RS-232 links for sensors, scales, service tools, or remote equipment. Its three drivers and five receivers provide more channels than a single-channel transceiver while the integrated dual charge-pump circuit reduces the number of supporting power components. Operation from 3 V to 5.5 V permits use with 3.3 V controllers, and the 500 kbps capability supports high-speed legacy serial traffic. Place the device according to the manufacturer application circuit, keep charge-pump routing away from sensitive signals, and provide suitable enclosure-level surge protection for cables leaving the controlled area.

🖥️

Point-of-Sale Terminal

The MAX3243ECDWR is suitable for a point-of-sale terminal that connects receipt printers, card readers, scanners, and local diagnostic equipment through RS-232. Three transmit channels and five receive channels support a multi-peripheral arrangement without requiring one complete transceiver package per port. Its 3 V to 5.5 V supply range accommodates common embedded logic rails, while the 500 kbps rating accommodates common serial peripheral rates. The integrated dual charge-pump arrangement simplifies the power section, but the design must still follow the manufacturer capacitor-placement guidance and keep external cable transients away from the logic domain.

📊

Data-Acquisition System

The MAX3243ECDWR can serve as the host-side RS-232 interface in a laboratory or plant-floor data-acquisition system. Its five receiver channels allow several instruments or transducers to be monitored, while three drivers support commands or configuration outputs to selected devices. The 28-pin SOIC package provides a conventional surface-mount assembly option, and the 3 V to 5.5 V operating range supports both legacy 5 V and modern 3.3 V control platforms. For reliable acquisition, isolate noisy grounds where required, route cable-side signals directly to the interface pins, and apply the manufacturer's recommended supply and charge-pump layout.

🔧

Laboratory Instrument Communication

The MAX3243ECDWR is appropriate for laboratory instruments that expose RS-232 connections to computers, service fixtures, or calibration equipment. Three driver channels support outbound commands and status links, while five receiver channels can accept responses from multiple instruments. With a maximum data rate of 500 kbps, the interface provides ample margin for many asynchronous serial-control protocols. The integrated charge-pump circuitry simplifies the analog interface section, although instrument designers should preserve recommended capacitor spacing, provide solid grounding, and prevent externally connected cables from introducing transients beyond the device's specified ESD ratings.

🧩

Embedded Service Console

The MAX3243ECDWR fits an embedded service console requiring several legacy communication ports for configuration, diagnostics, and firmware update interfaces. Its three-driver and five-receiver arrangement can consolidate multiple RS-232 links into one 28-pin SOIC package, reducing board area compared with separate single-channel devices. The 3 V to 5.5 V supply range allows deployment in either 5 V or 3.3 V embedded platforms, and the 500 kbps rate supports common asynchronous command protocols. Use the manufacturer application schematic to establish charge-pump component placement and verify signal levels, grounding, and connector protection before releasing the layout.

🌐

Network Equipment Management

The MAX3243ECDWR can provide legacy RS-232 management ports on switches, routers, gateways, and related communication equipment during installation or field maintenance. Multiple drivers and receivers allow a unit to connect to several configuration consoles or diagnostic adapters, while the integrated charge-pump circuit keeps the external support network compact. The 500 kbps capability is suitable for asynchronous management links, and operation across 3 V to 5.5 V gives board designers flexibility in system rail selection. Because RS-232 ports may be connected to long or exposed cables, the enclosure and connector should add appropriate transient protection beyond the chip's specified connector-pin ESD capability.

What is the MAX3243ECDWR?
The MAX3243ECDWR is a Texas Instruments 3 V to 5.5 V multichannel RS-232 line driver and receiver rated for data rates up to 500 kbps. According to the manufacturer datasheet, it integrates three line drivers, five line receivers, and a dual charge-pump circuit in a 28-pin SOIC package, providing the electrical interface between an asynchronous controller and RS-232 equipment.
What is the operating voltage of MAX3243ECDWR?
The MAX3243ECDWR operates from 3 V to 5.5 V. According to the Texas Instruments datasheet, this range supports systems using either 3.3 V or 5 V logic and supply rails. The internal dual charge-pump circuit develops the bipolar voltage levels required for RS-232 signaling without requiring a separate negative supply.
How many RS-232 drivers and receivers does MAX3243ECDWR have?
The MAX3243ECDWR provides three RS-232 line drivers and five line receivers. According to the manufacturer datasheet, the three-driver arrangement supports multiple outbound serial signals, while the five-receiver arrangement can monitor several incoming serial-port sources. Both groups are integrated with a dual charge-pump circuit in the same 28-pin SOIC package.
What is the maximum data rate of MAX3243ECDWR?
The MAX3243ECDWR supports RS-232 data rates up to 500 kbps. Texas Instruments identifies the part as a multichannel 500 kbps line driver and receiver in the manufacturer product page and datasheet. Actual application throughput also depends on controller timing, cable characteristics, baud-rate tolerance, and the connected peripheral.
Where can I download the MAX3243ECDWR datasheet PDF?
The official MAX3243ECDWR datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/max3243.pdf. The document contains the electrical characteristics, RS-232 interface information, ESD ratings, recommended application circuitry, pin information, and mechanical packaging data. Use the manufacturer PDF for production design decisions.
Where can I find the MAX3243ECDWR pinout?
The MAX3243ECDWR pin assignments are shown in the pin-description section of the official Texas Instruments MAX3243 datasheet. The exact ordering option MAX3243ECDWR uses the 28-pin DW SOIC package and is specified for an operating temperature range of 0°C to 70°C. Assign PCB nets from the manufacturer pin table rather than inferring them from driver and receiver counts.
What ESD protection does MAX3243ECDWR provide?
The MAX3243ECDWR provides ±15 kV ESD protection on serial-port connection pins under HBM and IEC 61000-4-2 air-gap discharge conditions. According to the manufacturer datasheet, contact-discharge protection is ±8 kV under IEC 61000-4-2. External connector and cable protection may still be required for severe industrial or outdoor environments.
MAX3243ECDWR vs MAX3232ECDR - which is better for a multi-channel design?
The MAX3243ECDWR is preferable when a design needs three RS-232 drivers and five receivers at rates up to 500 kbps in a 28-pin SOIC package. The MAX3232ECDR belongs to a different channel-count and package family, so it is not a footprint-compatible substitute. Confirm the required channel count, logic levels, package, and connector exposure before selecting either device.
When should I choose MAX3243ECDWR over a single-channel RS-232 transceiver?
Choose the MAX3243ECDWR when the equipment must expose multiple RS-232 ports in one 28-pin SOIC package. Its three drivers and five receivers reduce the number of separate transceiver packages and share one internal dual charge-pump implementation. A single-channel device remains appropriate when only one transmit and one receive path is required.
Is MAX3243ECDWR suitable for a 3.3 V industrial serial-port design?
The MAX3243ECDWR is suitable for a 3.3 V design because its specified supply range includes 3 V to 5.5 V. According to the manufacturer datasheet, it can operate up to 500 kbps and includes protected RS-232 connection pins. The surrounding controller and connector design must still satisfy the system grounding, isolation, surge, and environmental requirements.
What can replace MAX3243ECDWR?
A replacement for the MAX3243ECDWR must use the same 28-pin SOIC footprint and preserve the driver, receiver, supply, and logic-level assignments. The manufacturer cross-reference and substitution tools are appropriate starting points for an exact-match review. No candidate should be treated as a confirmed drop-in replacement unless its pinout, operating voltage, data rate, channel count, and ESD ratings have been verified.
Is MAX3243ECDWR the same as MAX3243ECDW?
The MAX3243ECDWR is the 28-pin SOIC ordering option identified in the Texas Instruments product data, while MAX3243ECDW denotes the related base device designation without the reel-order suffix. Packaging or shipping codes should not be treated as functionally different alternatives. Verify the exact orderable MPN, reel configuration, and marking before approving a replacement.
What are the key specifications of MAX3243ECDWR that engineers should know?
The key MAX3243ECDWR specifications are a 3 V to 5.5 V supply, operation up to 500 kbps, three line drivers, five line receivers, a dual charge-pump circuit, and a 28-pin SOIC package. The serial-port pins provide ±15 kV HBM and IEC 61000-4-2 air-gap ESD protection, plus ±8 kV contact-discharge protection, according to the manufacturer datasheet.
What is the best MaxLinear equivalent for MAX3243ECDWR?
A MaxLinear equivalent must be selected from the manufacturer's MAX3243 cross-reference and checked for an exact 28-pin SOIC footprint and pin-to-pin compatibility. The family cross-reference distinguishes direct drop-in replacements from functional equivalents, but it does not establish that every related MPN fits the DW package. Validate supply range, channel count, data rate, logic levels, and ESD performance before substitution.
Where can I buy MAX3243ECDWR and what is its lead time?
Use the Request a Quote form on this page to ask about MAX3243ECDWR availability, minimum order quantity, and current lead time. The form routes the request to XAIPART without exposing a static price or an unsupported stock claim. Include your required quantity, reel packaging preference, and target delivery date when requesting the quotation.
How should the MAX3243ECDWR charge-pump circuit be laid out?
Place the charge-pump capacitors and RS-232 connection components according to the recommended application circuit in the Texas Instruments MAX3243 datasheet. Keep charge-pump currents and switching-node traces away from sensitive analog inputs and unrelated high-speed signals. Use a low-impedance supply connection and short ground returns, and verify the final EMC and ESD performance at the product enclosure and cable interface.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MAX3243ECDWR — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the MAX3243ECDWR when the design needs three RS-232 transmit channels and five receive channels, operates from a 3 V to 5.5 V rail, and can use the 28-pin SOIC package. It is particularly useful for industrial controllers, test equipment, service consoles, and embedded systems that consolidate several legacy serial links. The MAX3232ECDR or MAX3232CDBR may be considered when fewer channels are required, but they are not drop-in replacements because their packages and channel configurations differ. The MAX232EIDR is also a related interface device rather than a footprint-compatible substitute for this 28-pin part. If a second source is mandatory, validate an exact 28-pin SOIC candidate against the manufacturer pinout, supply limits, logic thresholds, data rate, charge-pump architecture, and ESD ratings before changing the PCB.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য
Brand Texas Instruments
Package 28-pin SOIC (DW)
Product Type Multichannel RS-232 line driver/receiver
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 500 kbps
Line Drivers 3
Line Receivers 5
HBM and IEC Air-Gap ESD Protection ±15 kV
IEC 61000-4-2 Contact Discharge Protection ±8 kV
Operating Temperature Range 0°C to 70°C
RS-232 Compliance TIA/EIA-232-F
Charge-Pump Circuit Dual charge-pump circuit

মূল পার্থক্যসমূহ

  • Broader integrated channel count (বনামMAX3232ECDR)
  • Single-package multi-port consolidation (বনামMAX232EIDR)
  • Higher specified data-rate capability (বনামMAX3232ECDR)
  • Documented connector-pin ESD protection (বনামMAX3232CDBR)

ডিজাইন নোট

Place the charge-pump capacitors at the locations shown in the Texas Instruments MAX3243 datasheet application circuit and keep these connections short. Route the charge-pump and RS-232 driver outputs away from sensitive receiver inputs and unrelated high-speed logic. This separation helps prevent coupling from switching charge-pump nodes into measurement or communication channels.

Connect the device to a low-impedance supply plane and place the manufacturer's recommended decoupling capacitor close to the supply pins. The MAX3243ECDWR operates from 3 V to 5.5 V, but correct local decoupling remains important because the dual charge-pump circuit draws periodic current from the supply. Validate the layout with the expected cable load and external transient conditions.

Do not treat the specified connector-pin ESD rating as a complete industrial surge-protection solution. The device provides ±15 kV HBM and IEC 61000-4-2 air-gap protection and ±8 kV contact-discharge protection, but long cables may expose the port to larger system-level transients. Add appropriate connector, cable, and enclosure protection when the equipment operates outside a controlled environment.

Follow the manufacturer pin-description table when assigning the 28-pin SOIC footprint, especially the driver outputs, receiver inputs, supply pins, and ground connections. Do not infer unused or reserved connections from the three-driver and five-receiver configuration. Keep logic-side and cable-side return paths controlled so ground currents produced by external equipment do not disturb the host controller.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The manufacturer documentation identifies IEC 61000-4-2 and TIA/EIA-232-F requirements. RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive-qualification status require separate manufacturer confirmation.

ডেটা যাচাই করা হয়েছে: 2026-11-17 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

MAX3243ECDWR datasheet MAX3243ECDWR pinout MAX3243ECDWR datasheet pdf MAX3243ECDWR equivalent MAX3243ECDWR replacement MAX3243ECDWR cross reference MAX3243ECDWR vs MAX3232ECDR MAX3243ECDWR 28-SOIC MAX3243ECDWR application circuit Texas Instruments MAX3243ECDWR MAX3243ECDWR price MAX3243ECDWR stock

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments MAX3243ECDWR MAX3243E MAX3232ECDR MAX3232CDBR MAX232EIDR RS-232 transceiver line driver line receiver interface IC semiconductor 3 V to 5.5 V power supply 500 kbps data rate dual charge-pump circuit 28-pin SOIC DW package surface mount TIA/EIA-232-F IEC 61000-4-2 HBM ESD protection industrial serial communication laboratory instrumentation data acquisition embedded control systems
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন