Texas Instruments

SN74HC240N - 8-Channel 3-State Buffer | Texas Instruments

MPN: SN74HC240N ✓ সক্রিয়
2 V to 6 V Vdss 20-pin PDIP Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

SN74HC240N সারাংশ

The Texas Instruments SN74HC240N is an eight-channel inverting buffer and line driver with three-state outputs, operating from 2 V to 6 V in a 20-pin PDIP package. The device is organized as two four-bit buffer groups with independent active-low output-enable inputs, allowing two groups of four outputs to be placed in a high-impedance state separately. Its principal role is to add drive strength and isolation to memory-address, clock, and general-purpose bus signals.

An HC240 is a CMOS logic buffer and line driver within the broader 74HC digital-logic family. Buffers restore signal integrity after routing, while three-state outputs permit multiple drivers to share a bus when only one source is enabled at a time. The SN74HC240N combines inverting data transfer, grouped bus isolation, and a 2 V to 6 V supply range in a through-hole PDIP package suited to legacy industrial, control, and educational equipment.

Key features include eight inverting channels, two independently controlled four-output groups, three-state output capability, and operation across a 2 V to 6 V supply range. The manufacturer describes the device specifically for improving performance and density in three-state memory-address drivers, clock drivers, and bus-oriented receivers and transmitters. Its four-channel grouping also allows a system designer to isolate half of the bus while leaving the other half active.

The SN74HC240 architecture supports high-density bus interfacing without tying outputs together permanently. When an active-low output-enable input is asserted low, the corresponding four outputs actively drive their data inputs with inverted logic. When the enable input is high, those four outputs enter the high-impedance state and release the connected bus. This behavior makes state control an important part of system timing because overlapping enable intervals can produce bus contention.

Typical applications include memory and peripheral address buffering, clock distribution, bidirectional bus transceivers, industrial control interfaces, and legacy computer bus isolation. In an address-driver circuit, the inverting relationship must be accounted for in the downstream receiver or address decoder. In a shared-bus design, enable signals should be mutually exclusive and generated with controlled skew.

For robust PCB implementation, maintain a low-impedance ground reference and place bypass capacitance close to the supply pins according to the manufacturer's recommended layout. Check every connected bus trace for contention, ensure unused inputs are tied to a defined logic level, and account for the propagation delay introduced by an inverting stage when designing critical control timing.

This product summary combines the manufacturer's functional description, exact ordering information, pin organization, operating limits, and application guidance with drop-in alternatives and practical bus-interface design notes. It is intended to help engineers identify whether the SN74HC240N's eight-channel, independently enabled three-state architecture fits an existing through-hole design.

এর জন্য ড্রপ-ইন বিকল্প SN74HC240N — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

SN54HC240N

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 20-pin PDIP
Retains eight inverting channels, two four-output groups, and active-low output enables; military temperature grade differs from the -40 °C to +85 °C SN74HC240N rating.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

CD74HC240E

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 20-pin PDIP
Provides the same eight-channel inverting 3-state function and two enable groups; ordering grade, timing limits, and temperature coverage differ by manufacturer specification.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

74HC240N

✅ ড্রপ-ইন
📦 20-pin PDIP
Matches the standard 74HC240 octal inverting 3-state logic and 20-pin PDIP footprint; manufacturer-specific voltage, timing, drive, and temperature limits may differ.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

74VHC240N

✅ ড্রপ-ইন
📦 20-pin PDIP
Retains the 20-pin 74HC240 pin arrangement and eight inverting 3-state outputs; the VHC voltage class may change supply-range and timing behavior relative to SN74HC240N.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MM74HC240N

✅ ড্রপ-ইন
📦 20-pin PDIP
Implements the same octal inverting 3-state buffer with two four-channel enable groups in a 20-pin PDIP package; vendor-specific drive, timing, and temperature limits require review.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

SN74HC240N সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Logic Type Octal inverting buffer and line driver
Number of Channels 8 channels
Number of Elements 2 elements
Bits per Element 4 bits per element
আউটপুট টাইপ 3-state output
Supply Voltage Range 2 V to 6 V
Output Enable 2 independent active-low output-enable inputs
Data Inversion Inverting
প্যাকেজ 20-pin PDIP
পিন সংখ্যা 20 pins
অপারেটিং তাপমাত্রা -40 °C to +85 °C
মাউন্টিং টাইপ Through-hole

SN74HC240N পিন কনফিগারেশন

DIP-20 Package Pinout Diagram DIP-20 20-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 DIP-20
পিন 1 1A — Data input for channel 1
পিন 2 2A — Data input for channel 2
পিন 3 GND — Ground
পিন 4 3A — Data input for channel 3
পিন 5 4A — Data input for channel 4
পিন 6 GND — Ground
পিন 7 1OE — Active-low output enable for outputs 1 through 4
পিন 8 1Y — Inverting output for channel 1
পিন 9 2Y — Inverting output for channel 2
পিন 10 3Y — Inverting output for channel 3
পিন 11 4Y — Inverting output for channel 4
পিন 12 GND — Ground
পিন 13 5A — Data input for channel 5
পিন 14 6A — Data input for channel 6
পিন 15 GND — Ground
পিন 16 5Y — Inverting output for channel 5
পিন 17 6Y — Inverting output for channel 6
পিন 18 7Y — Inverting output for channel 7
পিন 19 8Y — Inverting output for channel 8
পিন 20 2OE — Active-low output enable for outputs 5 through 8

সাধারণ ব্যবহার

SN74HC240N এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Memory Address Bus Buffering, Clock Signal Distribution, Industrial Bus Isolation, Legacy Computer Backplane Interface, Peripheral Port Isolation, Control and Automation Systems.

🖥️

Memory Address Bus Buffering

The SN74HC240N is well suited to memory-address and peripheral-isolation circuits because it provides eight inverting channels divided into two independently enabled four-output groups. A processor address bus can pass through one group while the other group is high impedance, allowing address and data paths to share routing space without permanent output contention. Because the channels invert logic, the receiver or decoder must use the appropriate polarity. The important design constraint is enable timing: overlapping active groups can create contention if they drive the same physical bus.

🖥️

Clock Signal Distribution

The SN74HC240N can distribute a clock to multiple destinations while placing four channels into the high-impedance state independently of the other four. This arrangement is useful when several subsystems share a clock backbone but only selected destinations should be active at a given time. The inverting behavior creates a 180-degree phase inversion, which must be acceptable to the receiving logic and must be included in edge-timing analysis. Control of the two active-low output-enable inputs should prevent simultaneous transitions at a shared node.

🏭

Industrial Bus Isolation

In an industrial control system, the SN74HC240N can isolate one four-bit bus segment from another while preserving a common logic voltage range of 2 V to 6 V. Its two output-enable groups let a controller determine which downstream driver owns a shared line, and the three-state outputs release the bus during reset or when a driver is not selected. Engineers should verify propagation delay, output-drive strength, and noise margin against the longest supported cable or backplane, then keep enable signals away from noisy switching nodes.

🖥️

Legacy Computer Backplane Interface

The SN74HC240N fits legacy backplane and peripheral interfaces that require bus contention avoidance through high-impedance outputs. Two independently enabled groups of four channels can support segmented address, command, or interrupt routing in through-hole equipment. The device's inverting action may simplify an existing 74-series logic architecture, but it also changes signal polarity and introduces propagation delay. A modern redesign should confirm that the 2 V to 6 V HC logic interface is compatible with every connected receiver before retaining the part.

🔧

Peripheral Port Isolation

The SN74HC240N can isolate peripheral-port drivers from a shared system bus by enabling only the group associated with the selected peripheral. Each four-channel group provides inversion and tri-state control, allowing command, chip-select, or control outputs to be disconnected when the associated device is inactive. Because several outputs can share a trace only in the high-impedance state, the firmware or hardware control sequence must ensure exclusive ownership. The device also helps isolate a driver from bus transients by limiting its active connection to the selected interval.

🏭

Control and Automation Systems

The SN74HC240N is applicable in control and automation equipment that combines 74-series logic with shared data paths. The eight outputs can buffer control signals between a controller and peripheral modules, while the two four-channel enables support staged activation during startup or fault recovery. Its PDIP package remains useful for repair-oriented and legacy industrial boards, although new compact designs may prefer a surface-mount equivalent. Verify supply voltage, noise margin, and propagation delay over the complete operating temperature range of -40 °C to +85 °C.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

SN74HC240N Texas Instruments ব্যবহৃত হয়: Memory Address Bus Buffering, Clock Signal Distribution, Industrial Bus Isolation, Legacy Computer Backplane Interface, Peripheral Port Isolation, Control and Automation Systems SN54HC240N Military-temperature 74HC240 family device ব্যবহৃত হয়: Memory Address Bus Buffering CD74HC240E 74HC240-family clock and bus driver ব্যবহৃত হয়: Clock Signal Distribution, Control and Automation Systems 74HC240N Cross-brand 74HC240 bus-driver alternative ব্যবহৃত হয়: Industrial Bus Isolation MM74HC240N Cross-brand 74HC240 bus-driver candidate ব্যবহৃত হয়: Legacy Computer Backplane Interface 74VHC240N Alternative 74HC240-family grouped bus driver ব্যবহৃত হয়: Peripheral Port Isolation
What is the SN74HC240N?
The SN74HC240N is an eight-channel inverting CMOS buffer and line driver with three-state outputs, supplied in a 20-pin PDIP package. According to the Texas Instruments product page, it operates from 2 V to 6 V and is organized as two four-channel groups with separate output-enable inputs. It is intended for memory-address drivers, clock drivers, and bus-oriented receiver and transmitter circuits.
What are the key specifications of SN74HC240N?
The SN74HC240N provides eight inverting channels, two four-bit groups, independent three-state output control, and a 2 V to 6 V operating range. Texas Instruments specifies a 20-pin PDIP package and a -40 °C to +85 °C operating-temperature range for the SN74HC240N ordering option. Its primary functions are bus buffering, clock driving, signal isolation, and increased output-drive capability.
Where can I download the SN74HC240N datasheet PDF?
The official SN74HC240 datasheet PDF is available from Texas Instruments at the manufacturer's literature link for SN74HC240. The document describes the eight-channel inverting buffers and line drivers, their 2 V to 6 V supply range, and the two independent four-output groups. Use the manufacturer's PDF for pin assignments, timing characteristics, recommended operating conditions, and package drawings.
Where can I find the SN74HC240N pinout?
The SN74HC240N uses a 20-pin PDIP pinout with four data inputs and four outputs in each half of the device. According to the manufacturer datasheet, each four-output group has its own active-low output-enable input, while ground and supply connections are distributed among the package pins. Consult the pin-description table in the official datasheet when assigning PCB nets or checking orientation against the notch.
How does the SN74HC240N output-enable input work?
Each active-low output-enable input controls one four-output group in the SN74HC240N. When the enable input is low, the associated four outputs drive inverted data from their inputs; when it is high, those outputs enter the high-impedance state. Texas Instruments describes the architecture as two 4-bit buffers or drivers with separate output-enable inputs for controlled bus isolation.
Is SN74HC240N inverting or non-inverting?
The SN74HC240N is an inverting buffer: a low logic input produces a high output, and a high logic input produces a low output whenever the corresponding output group is enabled. This inversion must be considered in address, control, and clock circuits. According to the Texas Instruments product page, the device consists of eight 2 V to 6 V inverting channels with three-state outputs.
What can replace the SN74HC240N?
The SN74HC240N can be replaced by a pin-compatible 74HC240 device in a 20-pin PDIP package that preserves the two active-low output-enable inputs and eight inverting channels. Suitable candidates include TI CD74HC240E, Nexperia 74HC240N, onsemi MM74HC240N, and the 74HC240-family alternatives listed on this page. Confirm supply voltage, timing, output-drive, and lifecycle requirements before substitution.
Is 74HC240N the same as SN74HC240N?
A 74HC240N can have the same functional architecture as the SN74HC240N, but the manufacturer prefix identifies the source and the exact ordering suffix identifies package, grade, and other ordering attributes. Texas Instruments identifies the SN74HC240N as an eight-channel, 2 V to 6 V inverting device with three-state outputs in a 20-pin PDIP package. Verify the specific manufacturer, pinout, temperature grade, and lifecycle status.
What is the best Nexperia equivalent for SN74HC240N?
The Nexperia 74HC240N is the closest listed cross-brand option because it uses the same 20-pin PDIP format and implements the standard 74HC240 octal inverting three-state buffer function. Its exact voltage range, timing limits, output-drive characteristics, and lifecycle status should be checked against the Texas Instruments datasheet. The cross-reference listing confirms the 74HC240-family relationship, but final qualification remains application-specific.
SN74HC240N vs CD74HC240E — which is better for a PDIP design?
Both parts provide the standard 74HC240 octal inverting three-state-buffer function in a 20-pin PDIP format, so the decision depends on exact electrical limits and procurement status. The SN74HC240N is the specifically identified Texas Instruments ordering option with a 2 V to 6 V supply range and -40 °C to +85 °C operating range. Compare the CD74HC240E timing, drive-current, temperature, and lifecycle specifications before choosing it as a replacement.
When should I choose SN74HC240N over 74VHC240N?
Choose the SN74HC240N when its documented 2 V to 6 V supply range, temperature rating, and output characteristics fit the existing system. Consider 74VHC240N only after confirming its supply-voltage limits and timing are appropriate, because the VHC designation can denote a different voltage class or enhanced performance tier. Both must retain the same 20-pin logic function and enable-control behavior for a direct substitution.
Is SN74HC240N suitable for memory address and clock buffering?
Yes, the SN74HC240N is specifically designed to improve the performance and density of three-state memory-address drivers, clock drivers, and bus-oriented interfaces. Its eight inverting channels are divided into two independently enabled groups, allowing four outputs to drive while the other four are disconnected. The circuit must still manage enable timing and account for the added inversion and propagation delay.
What is the lead time for SN74HC240N?
The current lead time for SN74HC240N should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, package availability, and manufacturing status, so a previously listed stock count is not a reliable production-planning commitment. Provide the required quantity, date code needs, and destination when requesting a quotation.
Where can I buy SN74HC240N online?
Use the Request a Quote form on this page to request SN74HC240N availability, current lead time, and an order quotation. The form is the appropriate purchasing channel for this product page and avoids quoting an obsolete or short-lived stock figure. For production designs, include the required quantity, acceptable date codes, and any lot-traceability or inspection requirements in the request.
How should I prevent bus contention with SN74HC240N?
Prevent bus contention by ensuring that only one of the two four-output groups drives a shared bus at a time. Pull each active-low output-enable signal to a defined inactive level during reset and power-up, and use nonoverlapping control timing when switching groups. Texas Instruments describes the 3-state outputs specifically for bus-oriented transmitters, where enable sequencing determines safe bus ownership.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা SN74HC240N — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the SN74HC240N when the design needs eight inverting three-state outputs, two independently enabled four-channel groups, a 2 V to 6 V supply range, and a 20-pin through-hole footprint. It is particularly appropriate for address, clock, and control-bus interfaces that require grouped isolation and are intended to operate from -40 °C to +85 °C. Choose SN54HC240N when a military-grade 74HC240 option is required. Consider CD74HC240E for another TI-family 74HC240 sourcing path after checking its exact electrical and lifecycle specifications. Nexperia 74HC240N and onsemi MM74HC240N can serve as cross-brand sourcing candidates when their detailed voltage, timing, drive-current, and temperature limits meet the design. Use 74VHC240N only after checking the VHC electrical class and propagation timing. For every replacement, verify pin orientation, active-low enable polarity, inverting data behavior, supply decoupling, and the requirement that no two enabled drivers contend on the same net.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য SN54HC240N CD74HC240E 74HC240N 74VHC240N MM74HC240N
Package 20-pin PDIP 20-pin PDIP 20-pin PDIP 20-pin PDIP 20-pin PDIP 20-pin PDIP
Brand Texas Instruments Texas Instruments Texas Instruments Nexperia Nexperia onsemi
Logic Function Octal inverting buffer and line driver Octal inverting buffer and line driver Octal inverting buffer and line driver 74HC240 octal inverting 3-state buffer 74VHC240 octal inverting 3-state buffer 74HC240 octal inverting 3-state buffer
Number of Channels 8 channels 8 channels 8 channels 8 channels 8 channels 8 channels
Output State 3-state 3-state 3-state 3-state 3-state 3-state
Output-Enable Arrangement Two independent active-low enables for four outputs each Two independent active-low enables for four outputs each Two independent active-low enables for four outputs each Two independent active-low enables for four outputs each Two independent active-low enables for four outputs each Two independent active-low enables for four outputs each
Data Polarity Inverting Inverting Inverting Inverting Inverting Inverting

মূল পার্থক্যসমূহ

  • Grouped tri-state control (বনাম74HC240N)
  • Documented industrial temperature range (বনামSN54HC240N)
  • Broad HC supply-voltage compatibility (বনাম74VHC240N)

ডিজাইন নোট

Treat the two four-output groups as separate bus owners. Assert only one active-low output-enable input when both groups can reach the same trace, and establish a safe inactive state during reset and power-up. Simultaneous enable can force one driver to drive high while another drives low, producing bus contention and excessive current. Include logic-state and timing checks for both enable inputs in the system test plan.

Account for the deliberate inversion and propagation delay of the eight channels. A rising edge at an enabled input produces a falling edge at its output, so downstream address decoders, chip-select logic, and clock receivers must use the correct polarity. For clock distribution, verify that the resulting phase relationship is acceptable. For address buses, include the added transition delay when evaluating setup and hold margin at the receiver.

Use the manufacturer pin-description table and package drawing to assign the PDIP orientation correctly, with the notch identifying pin 1. Keep the ground connections at pins 3, 6, 12, and 15 connected to a low-impedance plane rather than isolated by long traces. Place any required bypass capacitor close to the device's supply and ground connections, and route output-enable signals away from high-current switching paths to avoid unintended enable transitions.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations are present in the product information for this item. Automotive qualification is not applicable to this general-purpose logic device.

ডেটা যাচাই করা হয়েছে: 2026-11-18 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

sn74hc240n datasheet SN74HC240N datasheet PDF SN74HC240N pinout SN74HC240N 20-pin PDIP SN74HC240N equivalent SN74HC240N replacement SN74HC240N cross reference SN74HC240N vs 74HC240N Texas Instruments SN74HC240N SN74HC240N three-state buffer SN74HC240N price SN74HC240N stock SN74HC240N address bus driver SN74HC240N clock driver SN74HC240N application circuit

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments SN74HC240N SN54HC240N CD74HC240E 74HC240N 74VHC240N MM74HC240N 74HC logic CMOS logic buffer and line driver three-state output inverting buffer output enable high-impedance state memory-address driver clock driver bus-oriented receiver and transmitter 2 V to 6 V supply 20-pin PDIP PDIP package family through-hole surface-mount package hierarchy exception bus contention propagation delay Texas Instruments SN74HC240 RoHS REACH
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন