Texas Instruments

SN74HC241N - 8-Channel 3-State Buffer Driver | Texas Instruments

MPN: SN74HC241N ✓ সক্রিয়
2 V to 6 V Vdss 20-pin PDIP Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

SN74HC241N সারাংশ

The Texas Instruments SN74HC241N is an octal non-inverting buffer and line driver with 3-state outputs, a 2 V to 6 V supply range, and a 20-pin PDIP package. It is arranged as two independent four-bit buffer groups with separate active-low output-enable inputs, allowing two bus or memory subsystems to be disabled independently. The device passes non-inverted data when 1OE is low or 2OE is high.

An HC-series bus buffer is a digital logic device that strengthens signals passing between a driving source and a receiving load. Its role in the broader hierarchy is CMOS logic → bus interface IC → buffer or line driver. The SN74HC241N is intended to improve the performance and density of memory address drivers, clock drivers, and bus-oriented transmitters and receivers. Its 3-state outputs allow multiple devices to share a bus when the disabled outputs enter a high-impedance state.

Key features include eight non-inverting channels, two independently controlled four-bit output groups, 2 V to 6 V operation, and 3-state output capability. The split output-enable arrangement provides finer bus control than a single eight-bit enable, making it suitable for systems where two address groups or independent data paths require separate tri-state control. The device operates from the same 2 V to 6 V range commonly used by 74HC-compatible digital systems.

The SN74HC241N provides logic-level buffering without introducing inversion, so source data polarity remains unchanged at the outputs. Because each four-bit group has its own output-enable input, a system can place one group into the high-impedance state while the other continues driving. This arrangement is useful in bidirectional-bus interface arrangements, bidirectional transceivers, memory address multiplexing, and clock-distribution stages.

Typical applications include microprocessor and microcontroller address buses, memory address drivers, clock and control-signal distribution, bus isolation between functional blocks, and general-purpose tri-state data-bus routing. The through-hole PDIP package also suits legacy industrial control systems, educational instruments, prototypes, and maintenance replacements where a socketed 20-pin DIP footprint is preferred.

When designing around the SN74HC241N, treat the two output-enable groups independently and ensure that only one driver actively sources a shared net. Confirm every output state during normal operation and while the corresponding group is disabled. Decoupling requirements and operating limits should be taken from the manufacturer datasheet, and any replacement should be checked for identical enable polarity, channel arrangement, and pin mapping.

This page organizes the device function, package details, drop-in candidates, application guidance, and design cautions into one engineering reference. It also adds practical routing and bus-ownership advice that helps shorten design review and component-replacement work.

এর জন্য ড্রপ-ইন বিকল্প SN74HC241N — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

SN74HC241NE4

✅ ড্রপ-ইন
📦 20-pin PDIP
Same SN74HC241 function and dual four-bit enable organization; temperature-grade details should be confirmed for the selected orderable variant

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

SN74HC241NE

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 20-pin PDIP
Same SN74HC241 family and PDIP lead arrangement; device-grade and ordering-code details differ from SN74HC241N

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

SN74HC241N

✅ ড্রপ-ইন
Texas Instruments
📦 20-pin PDIP
Octal non-inverting buffer and line driver · 8 channels · 3-state output · 2 groups of 4 bits · 2 V to 6 V · 2 independent output-enable inputs · 1OE active low; 2OE active high · Non-inverting

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

SN74HC241N সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Product Type Octal non-inverting buffer and line driver
Number of Channels 8 channels
আউটপুট কনফিগারেশন 3-state output
Channel Organization 2 groups of 4 bits
Supply Voltage Range 2 V to 6 V
Output Enable Inputs 2 independent output-enable inputs
Output Enable Polarity 1OE active low; 2OE active high
Data Polarity Non-inverting
প্যাকেজ 20-pin PDIP
মাউন্টিং টাইপ Through-hole
Logic Family 74HC CMOS logic

SN74HC241N পিন কনফিগারেশন

DIP-20 Package Pinout Diagram DIP-20 20-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 DIP-20
পিন 1 1A1 — Data input for channel 1 of group 1
পিন 2 1Y1 — Non-inverting output for channel 1 of group 1
পিন 3 2A1 — Data input for channel 1 of group 2
পিন 4 2Y1 — Non-inverting output for channel 1 of group 2
পিন 5 GND — Ground connection
পিন 6 1OE — Active-low output enable for the first four-bit group
পিন 7 1A2 — Data input for channel 2 of group 1
পিন 8 1Y2 — Non-inverting output for channel 2 of group 1
পিন 9 2A3 — Data input for channel 3 of group 2
পিন 10 2Y4 — Non-inverting output for channel 4 of group 2
পিন 11 2OE — Active-high output enable for the second four-bit group
পিন 12 2Y3 — Non-inverting output for channel 3 of group 2
পিন 13 2A4 — Data input for channel 4 of group 2
পিন 14 2Y2 — Non-inverting output for channel 2 of group 2
পিন 15 1Y4 — Non-inverting output for channel 4 of group 1
পিন 16 1A4 — Data input for channel 4 of group 1
পিন 17 1Y3 — Non-inverting output for channel 3 of group 1
পিন 18 1A3 — Data input for channel 3 of group 1
পিন 19 VCC — Positive power supply connection
পিন 20 GND — Ground connection

সাধারণ ব্যবহার

SN74HC241N এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Memory Address Driver, Clock Signal Distribution, Tri-State Data Bus Interface, Microcontroller Interface Isolation, Bus-Oriented Receiver and Transmitter Stage, Legacy Industrial Control Upgrade.

💾

Memory Address Driver

The SN74HC241N is suited to driving microprocessor or memory address lines because it provides eight non-inverting channels with 3-state outputs. Its two independent four-bit enable groups allow an address bus to be divided into separately controlled sections, which can simplify partial memory-bank isolation. Place the device close to the memory connectors or memory-array inputs so the buffered signals reach the load with minimal board-trace degradation. Verify propagation delay and output timing against the memory access window, and confirm that only one driver remains enabled on each shared address net.

🕐

Clock Signal Distribution

The SN74HC241N can distribute a clock or control signal to multiple destinations while keeping unused outputs in the high-impedance state. Eight non-inverting channels support one-to-many clock fan-out, and the split enable architecture permits four outputs to operate independently from the other four. Keep clock traces short, provide a clean source clock, and avoid excessive capacitive loading on any single channel. Because the device is a CMOS line driver rather than a dedicated low-skew clock buffer, validate edge quality and duty-cycle margin in the target system.

🌐

Tri-State Data Bus Interface

The SN74HC241N supports shared-bus designs because its outputs can be disabled into a high-impedance state. Two separately enabled four-bit groups are especially useful when two subsystems must connect and release the same collection of nets at different times. Establish a deterministic ownership rule so that no two enabled drivers contend for one line. Route the data group and its enable signals together, keep stub lengths short, and confirm that every output-enable pin is actively controlled rather than left floating.

🔌

Microcontroller Interface Isolation

The SN74HC241N can isolate a microcontroller interface from a wider system bus while preserving non-inverted logic polarity. Enabling only the four channels associated with the local peripheral prevents unused section outputs from loading the shared bus. Route the enable inputs directly to the controlling logic and use pull resistors where a reset or power-up state requires a defined output condition. Validate that the disabled group presents the intended impedance and that the enabled group meets the load's input-voltage and capacitance requirements.

🔗

Bus-Oriented Receiver and Transmitter Stage

The SN74HC241N is appropriate for intermediate bus-oriented receiver and transmitter stages where non-inverting buffering and output isolation are required. Its 2 V to 6 V operating range allows use in both low-voltage and 5 V HC-compatible environments, subject to the input and output thresholds of each system. Place the device between the logic source and the bus connector or backplane interface, then use controlled enable signals to prevent contention during module transitions. Review signal-integrity requirements for the board because no additional series termination is implied by the buffer function.

🏭

Legacy Industrial Control Upgrade

The 20-pin PDIP package makes the SN74HC241N useful for maintenance and modernization of legacy industrial control boards that use socketed through-hole logic. The octal buffer function can replace older address-driver or bus-interface stages while retaining a familiar footprint and separate four-bit enable control. Before installation, compare the original device's pinout, enable polarity, supply voltage, and output timing with the manufacturer datasheet. Confirm that the replacement board does not expose unused inputs and that its supply rails meet the 2 V to 6 V operating requirement.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

SN74HC241N Texas Instruments ব্যবহৃত হয়: Memory Address Driver, Clock Signal Distribution, Tri-State Data Bus Interface, Microcontroller Interface Isolation, Bus-Oriented Receiver and Transmitter Stage, Legacy Industrial Control Upgrade Lattice Semiconductor SN74HC241N second-source address-driver option ব্যবহৃত হয়: Memory Address Driver, Tri-State Data Bus Interface, Legacy Industrial Control Upgrade SN74HC241NE4 alternate SN74HC241-family distributor ব্যবহৃত হয়: Clock Signal Distribution, Bus-Oriented Receiver and Transmitter Stage SN74HC241NE same-family PDIP sourcing option ব্যবহৃত হয়: Microcontroller Interface Isolation
What is the SN74HC241N used for?
The SN74HC241N is an octal non-inverting buffer and line driver with 3-state outputs, supplied in a 20-pin PDIP package. According to the TI product description, it improves the performance and density of memory address drivers, clock drivers, and bus-oriented receivers and transmitters. Its two independent four-bit output groups can drive separate bus segments or enter a high-impedance state without stopping the other group.
What is the operating voltage of SN74HC241N?
The SN74HC241N operates from a 2 V to 6 V power supply. The TI product page identifies it as a 74HC-family CMOS buffer/line driver, allowing use with both low-voltage 2 V systems and conventional 5 V logic. Design the decoupling and input-signal amplitude so that every input remains within the electrical limits stated in the manufacturer datasheet.
How does the SN74HC241N 3-state output work?
The SN74HC241N outputs enter a high-impedance state when their associated output-enable input commands the disabled condition. The device has two independent enable groups: 1OE is active low, while 2OE is active high. The TI datasheet states that data is passed non-inverted when 1OE is low or 2OE is high, allowing either four-bit group to be disabled independently.
Is the SN74HC241N the same as the 74HC241?
The SN74HC241N and 74HC241 implement the same octal non-inverting, 3-state buffer and line-driver function, but the SN74HC241N is the manufacturer-specific orderable designation for a 20-pin PDIP device. A substitution should confirm the 20-pin footprint, the unusual mixed enable polarity, channel grouping, and operating ratings rather than relying on the generic function name alone.
What is the best drop-in replacement for SN74HC241N?
A drop-in replacement must match the 20-pin PDIP footprint, the non-inverting data path, the two four-bit output groups, and the mixed 1OE-active-low/2OE-active-high enable polarity. SN74HC241NE4 is identified as a functionally comparable SN74HC241 variant, while the Lattice Semiconductor SN74HC241N provides a second-manufacturer sourcing option. Confirm temperature grade and electrical limits before production use.
What can replace an SN74HC241N in an existing circuit?
The closest replacement is a 74HC241-family device with the same 20-pin PDIP lead arrangement and the same enable polarity. The SN74HC241NE4 and Lattice Semiconductor SN74HC241N are the principal candidates identified for the function. Do not substitute a generic 74HC244 or 74HC541 without checking the pins, because those devices use different output-enable arrangements.
Where can I download the SN74HC241N datasheet?
The official SN74HC241 data sheet is available from Texas Instruments at https://www.ti.com/lit/gpn/SN74HC241, and the manufacturer product page is https://www.ti.com/product/SN74HC241. The device-specific datasheet provides the authoritative pin descriptions, recommended operating conditions, timing characteristics, and power limits needed for a new design or replacement qualification.
Where can I find the SN74HC241N pinout?
The SN74HC241N pinout is shown in the pin-configuration diagram of the Texas Instruments SN74HC241 data sheet. The device is a 20-pin PDIP and is organized as two four-bit buffer groups with independent output-enable controls. Use the manufacturer pin table to map the non-inverting inputs, outputs, enable inputs, VCC, and ground connections during PCB layout.
SN74HC241N vs SN74HC541N - which is better for a tri-state bus?
Choose the SN74HC241N when independent control of two four-bit output groups is required; its 1OE input is active low and its 2OE input is active high. The SN74HC541N also appears in 74HC-family comparisons, but the two parts are not automatically interchangeable because their enable organization differs. Confirm the exact enable logic and pin assignment before selecting a substitute.
When should I choose the SN74HC241N instead of a single-enable octal buffer?
Choose the SN74HC241N when two four-bit sections must be tri-stated independently. Its split enable structure can isolate one address or data group while another remains active, reducing unnecessary switching and simplifying partial bus shutdown. A single-enable octal buffer may be simpler only when all eight channels must always be controlled together.
Is SN74HC241N suitable for a memory address driver?
Yes, the SN74HC241N is specifically intended to improve memory address-driver performance and density. Its eight non-inverting channels can present stronger logic levels to memory devices, while the two independent four-bit enables permit flexible control of address groups. Place it close to the memory interface and verify timing margin against the connected device specifications.
How should unused SN74HC241N output-enable pins be handled?
Every output-enable input must be driven to a valid logic level so that no output group is left floating. Because 1OE is active low and 2OE is active high, tie 1OE to ground for continuous enable or to VCC for disable, and reverse those connections for 2OE. Use pull resistors only when the controlling signal can float, and verify the active levels against the datasheet.
What are the key specifications of SN74HC241N that engineers should know?
The essential SN74HC241N specifications are eight non-inverting channels, 3-state outputs, a 2 V to 6 V supply range, two independently controlled four-bit groups, and a 20-pin PDIP package. The enable arrangement is unusual: 1OE is active low and 2OE is active high. The TI product description confirms the channel count, voltage range, tri-state outputs, and buffer/line-driver role.
Where can I buy SN74HC241N online?
Use the Request a Quote form on this page to request SN74HC241N pricing, stock confirmation, and a current lead-time quotation for the 20-pin PDIP package. The form connects the request to the XAIPART sales process without relying on static distributor prices. Include your target quantity, date code preference, and destination country for a complete quotation.
What is the price and lead time for SN74HC241N?
Current SN74HC241N pricing and lead time are confirmed through the Request a Quote form on this page. Quote requests can reflect the required quantity, standard packaging, and current supply position. For prototype builds, state the quantity of one; for production builds, provide the annual usage and scheduled delivery dates to obtain a practical planning response.
Is SN74HC241N in stock for immediate shipment?
Stock status for SN74HC241N should be confirmed through the Request a Quote form on this page because inventory changes by quantity and purchasing schedule. Include the desired package quantity, shipment destination, and required date in the request. The manufacturer product page and distributor listings identify the part as an orderable 20-pin PDIP device.
What is the best Texas Instruments equivalent for SN74HC241N?
The closest Texas Instruments equivalent identified for the SN74HC241N function is the SN74HC241NE4, which is compared against the SN74HC241N as the same SN74HC241-family octal buffer/line-driver with separate four-bit output-enable groups. Confirm that its package, temperature grade, and enable polarity satisfy the design before treating it as a drop-in substitution.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা SN74HC241N — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the SN74HC241N when a design needs eight non-inverting, 3-state outputs in a 20-pin PDIP package and requires independent control of two four-bit groups. Its mixed enable polarity is useful in buses that select one group active-low and the other active-high, but it also requires careful reset and routing design. Select SN74HC241NE4 when that specific TI orderable variant matches the required device grade and sourcing plan. Consider the Lattice Semiconductor SN74HC241N for a second-source path with the same HC241 function and PDIP footprint. Do not select SN74HC541N or a generic 74HC244 merely because they also provide 3-state outputs: their enable organizations differ, and pin-level compatibility must be demonstrated before substitution.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য SN74HC241NE4 SN74HC241NE SN74HC241N
Brand Texas Instruments Texas Instruments Texas Instruments Lattice Semiconductor
Package 20-pin PDIP 20-pin PDIP 20-pin PDIP 20-pin PDIP
Function Octal non-inverting 3-state buffer/line driver Octal non-inverting 3-state buffer/line driver Octal non-inverting 3-state buffer/line driver Octal non-inverting 3-state buffer/line driver
Channel Count 8 channels 8 channels 8 channels 8 channels
Channel Organization Two 4-bit groups Two 4-bit groups Two 4-bit groups Two 4-bit groups
Supply Voltage Range 2 V to 6 V 2 V to 6 V 2 V to 6 V 2 V to 6 V
Output Enable Arrangement Separate 1OE and 2OE controls Separate 1OE and 2OE controls Separate 1OE and 2OE controls Separate 1OE and 2OE controls
Output Enable Polarity 1OE active low; 2OE active high 1OE active low; 2OE active high 1OE active low; 2OE active high 1OE active low; 2OE active high
Data Polarity Non-inverting Non-inverting Non-inverting Non-inverting
Mounting Type Through-hole Through-hole Through-hole Through-hole

মূল পার্থক্যসমূহ

  • Independent enable control for each four-bit group (বনামSN74HC241N)
  • Mixed enable polarity supports direct group selection (বনামSN74HC541N)
  • Non-inverting buffered bus drive (বনামSN74HC241NE4)

ডিজাইন নোট

Do not treat the two output-enable inputs as having identical polarity. The SN74HC241N uses an active-low 1OE input and an active-high 2OE input, exactly as stated in the TI description. Driving both enables with the same straight logic level can disable one group and enable the other unintentionally. Verify each connection in the schematic and confirm that no enable input can float during reset.

Route each four-bit data group close to its associated outputs and keep the two enable traces away from high-current switching paths. Maintain a continuous ground path under the device and place the supply bypass capacitor near the VCC and GND pins. For longer board traces, review the capacitive-load requirements and timing budget in the manufacturer datasheet before adding series termination.

The SN74HC241N is designed to improve bus-driver performance, but a buffer cannot remove poor board-level signal integrity. Avoid stubs on address or clock nets, minimize capacitive loading, and keep clock outputs away from switching edges that create large crosstalk. If two independent blocks can drive the same bus, define strict ownership sequencing so their outputs are never enabled simultaneously.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The device is a general-purpose 74HC CMOS logic buffer/line driver. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer product documentation or lot-specific material declarations.

ডেটা যাচাই করা হয়েছে: 2026-11-18 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

SN74HC241N datasheet SN74HC241N pinout SN74HC241N datasheet pdf SN74HC241N DIP-20 SN74HC241N equivalent SN74HC241N drop-in replacement SN74HC241N vs SN74HC241NE4 SN74HC241N vs SN74HC541N SN74HC241N memory address driver SN74HC241N tri-state bus SN74HC241N output enable polarity Texas Instruments SN74HC241N SN74HC241N price SN74HC241N stock 74HC241N 20 pin buffer replacement

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments SN74HC241N SN74HC241NE4 SN74HC241NE Lattice Semiconductor 74HC CMOS logic octal buffer line driver bus interface IC non-inverting logic 3-state output tri-state output high-impedance state output enable 1OE 2OE four-bit bus group memory address driver clock driver bus-oriented receiver bus-oriented transmitter PDIP-20 through-hole package 2 V to 6 V
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন