Texas Instruments

SN74LS682N - 8-Bit Magnitude Comparator | Texas Instruments

MPN: SN74LS682N ✓ সক্রিয়
2 words Rds(on) 20-pin PDIP Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

SN74LS682N সারাংশ

The Texas Instruments SN74LS682N is an 8-bit identity and magnitude comparator that compares two binary or BCD words and provides active-low equality and greater-than outputs. It is packaged in a 20-pin PDIP and uses the low-power Schottky TTL logic family for compatible digital-system interfacing. The SN74LS682N supports two 8-bit input buses, A and B, allowing a system to determine whether A equals B or whether A is greater than B. According to the manufacturer datasheet, the device also uses totem-pole output structures.

An identity or magnitude comparator is a combinational logic device that accepts two multi-bit operands and produces outputs describing their relative relationship. The SN74LS682 belongs to the broader 74LS comparator family, where an 8-bit magnitude comparator compares parallel data rather than determining the order of two individual bits. Its identity function provides a direct equality result, while its magnitude function provides a greater-than result. These operations are useful in control, sorting, address matching, arithmetic sequencing, and test systems.

The principal feature of the SN74LS682N is its dedicated 8-bit comparison architecture. Each operand is presented on a parallel bus, and the internal logic evaluates the complete word rather than requiring a serial sequence of bit-by-bit comparisons. The device provides active-low A=B and A>B outputs, enabling wired-output systems to combine several comparator results. Its 74LS Schottky TTL construction is suited to conventional five-volt logic environments, while the through-hole PDIP package simplifies assembly, inspection, and replacement in legacy or industrial control equipment.

The SN74LS682N differs from related devices in the same 74LS family primarily by its output set. The LS682 supplies equality and greater-than functions; not every related magnitude comparator offers the same combination. This distinction is important because a substitute with the same package and pin count is not automatically interchangeable if its output behavior differs. Engineers should compare truth tables, propagation timing, output polarity, supply requirements, and input-current characteristics before approving any replacement.

Typical uses include equality detection in digital control systems, BCD value comparisons in industrial controllers, parallel sorting and routing logic, address and identification-word recognition, and legacy test equipment. The comparator can also serve as the central decision element in alarm and sequencing circuits where two eight-bit values must be tested continuously. Its parallel interface makes it suitable when the system already presents complete words and requires a hardware-generated status indication without microcontroller comparison code.

PCB design should preserve clear separation between the two operand buses and route each input directly to its corresponding package pin. Decoupling requirements, grounded-return practices, unused-input handling, and TTL input-current budgeting must follow the manufacturer datasheet. Because outputs are active low and totem-pole structured, downstream circuits should account for both voltage levels and fan-out rather than treating the outputs as ideal push-pull signals. Socketed prototypes should also account for contact resistance and contamination at older through-hole connections.

This product page combines the manufacturer function description, package information, family distinctions, pin-verification guidance, and application-oriented replacement criteria to support engineering selection. It also identifies the limits of package-only compatibility: a true drop-in replacement must reproduce the SN74LS682N output truth table and electrical timing in addition to matching the 20-pin PDIP footprint.

এর জন্য ড্রপ-ইন বিকল্প SN74LS682N — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

SN74LS682N

✅ ড্রপ-ইন
Texas Instruments
📦 PDIP-20
8-bit identity/magnitude comparator · 2 words · 8 bits per word · Binary or BCD · Active-low A=B output · Active-low A>B output · Totem-pole · 74LS Schottky TTL

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

SN74LS682N/MOTOROLA

✅ ড্রপ-ইন
📦 PDIP-20
Same functional MPN and 20-pin PDIP format; legacy branding and exact ordering-code electrical documentation require verification

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

DM74LS682N

✅ ড্রপ-ইন
📦 PDIP-20
Same LS-family 8-bit identity/magnitude comparison in a 20-pin PDIP; device-specific timing and ordering codes require confirmation

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

74HC682N

✅ ড্রপ-ইন
📦 PDIP-20
Same 20-pin PDIP comparator footprint but CMOS electrical characteristics and timing differ from the Schottky TTL SN74LS682N

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

74HCT682N

✅ ড্রপ-ইন
📦 PDIP-20
Same 20-pin PDIP comparator footprint with TTL-compatible input thresholds; CMOS output and timing characteristics differ from the SN74LS682N

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

SN74LS682N সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Comparator Type 8-bit identity/magnitude comparator
Number of Input Words 2 words
Input Word Width 8 bits per word
Supported Number Formats Binary or BCD
Identity Output Active-low A=B output
Magnitude Output Active-low A>B output
Output Structure Totem-pole
Logic Family 74LS Schottky TTL
প্যাকেজ 20-pin PDIP
পিন সংখ্যা 20 pins
মাউন্টিং টাইপ Through-hole

SN74LS682N 20-pin pdip পিন কনফিগারেশন গাইড

SN74LS682N (20-pin pdip প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।

SN74LS682N-এর জন্য 20-pin pdip প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি SN74LS682N.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

SN74LS682N এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Control Equality Decision, BCD Value Monitoring, Address and Identifier Recognition, Sorting and Routing Logic, Legacy Test and Measurement Equipment, Alarm Threshold and Sequencing.

🏭

Industrial Control Equality Decision

The SN74LS682N fits legacy industrial-control boards that must determine whether two eight-bit process or position values are equal. Its parallel A and B buses allow the comparison result to be generated directly in hardware without occupying a microcontroller input cycle. The active-low A=B output can drive interlock or sequencing logic, while the active-low A>B output supports threshold decisions. Because the device uses a 20-pin PDIP and 74LS TTL signaling, designers should preserve the original bus routing and verify voltage levels, fan-out, propagation delay, and supply conditions before using it in an updated controller.

🔧

BCD Value Monitoring

The SN74LS682N can monitor two eight-bit BCD words in legacy meters, counters, and sequencing equipment. It accepts complete BCD operand buses and produces active-low equality and greater-than outputs, making it useful for indicating when a measured value reaches, exceeds, or matches a preset value. The comparison is performed in parallel rather than through a serial bit-by-bit routine. In a redesigned board, the engineer should verify the exact output truth table, input levels, timing, and supply requirements from the manufacturer datasheet, especially if peripheral devices use mixed TTL and CMOS interfaces.

🖥️

Address and Identifier Recognition

The SN74LS682N is useful in address-matching and identification-word circuits because it can compare two complete eight-bit identifiers in parallel. Its active-low A=B output can indicate that a received code matches a stored reference, while A>B provides an ordering result for subsequent logic. This makes the device suitable for legacy access-control, routing, and equipment-recognition assemblies that already use 74LS-level signals. Board reuse is practical because the SN74LS682N is a 20-pin PDIP, but functional validation must include output polarity, fan-out, propagation delay, and the behavior of every connected TTL input.

⚡

Sorting and Routing Logic

The SN74LS682N can serve as a hardware sorting element when two eight-bit values must be ordered quickly. The greater-than result helps downstream combinational logic select a path, route a value, or advance a sequence, while the equality result identifies a match. Parallel evaluation reduces the need to perform a software comparison and is valuable in older automation equipment. The implementation should account for the difference between active-low outputs and familiar positive-logic control signals, and it should use the manufacturer timing data when cascading comparator decisions or combining outputs from multiple devices.

🔧

Legacy Test and Measurement Equipment

The SN74LS682N fits legacy test equipment that compares an eight-bit DUT response with a reference word and reports equality or magnitude through hardware. Such arrangements are common in production fixtures, interface testers, and diagnostic panels built with 74LS logic. The device's 20-pin PDIP package is straightforward to socket, inspect, and replace during maintenance. Before substituting it into a newer fixture, verify supply voltage, TTL input thresholds, output polarity, fan-out, and propagation delay. A same-package comparator with a different output complement may produce incorrect pass or fail decisions even if it powers up normally.

⚡

Alarm Threshold and Sequencing

The SN74LS682N can provide a hardware threshold decision in alarm, interlock, and multi-stage sequencing systems. When an eight-bit measured value becomes greater than a reference word, the active-low A>B output can participate in the next control stage; when the two words match, the active-low A=B output can trigger a separate event path. Because the outputs are active low, inverter stages may be required to create conventional positive-logic enables. The design should preserve adequate fan-out, provide clean ground returns, and verify timing against the rest of the 74LS control chain before production use.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

SN74LS684 Related 8-bit magnitude-comparator family member ব্যবহৃত হয়: Industrial Control Equality Decision, Address and Identifier Recognition, Legacy Test and Measurement Equipment SN74LS688 Related 8-bit identity and magnitude comparator ব্যবহৃত হয়: Industrial Control Equality Decision, Address and Identifier Recognition, Legacy Test and Measurement Equipment SN74LS685 Related 8-bit magnitude-comparator family member ব্যবহৃত হয়: BCD Value Monitoring, Sorting and Routing Logic, Alarm Threshold and Sequencing SN74LS687 Related 8-bit magnitude-comparator family member ব্যবহৃত হয়: BCD Value Monitoring, Sorting and Routing Logic, Alarm Threshold and Sequencing
What is the operating function of SN74LS682N?
The SN74LS682N compares two 8-bit binary or BCD words and provides active-low A=B and A>B outputs. It also uses totem-pole outputs according to the manufacturer datasheet SDLS008. The two parallel operand buses are evaluated as complete words, making the device suitable for equality detection, magnitude decision logic, address recognition, sorting, and industrial control systems that require hardware comparison.
What package does the SN74LS682N use?
The SN74LS682N is supplied in a 20-pin PDIP package for through-hole mounting. The manufacturer product page identifies the N package as PDIP with 20 pins. This package differs from surface-mount logic options because it uses through-hole leads and a larger inter-pin pitch, so a replacement must match both the board footprint and the functional truth table rather than being selected from logic-family similarity alone.
Where can I download the SN74LS682N datasheet PDF?
The official SN74LS682N datasheet PDF is available from the Texas Instruments product-download link at https://www.ti.com/lit/ds/symlink/sn74ls682.pdf. The document identifies the related SN54LS682 and SN74LS682 as 8-bit magnitude and identity comparators. Use the pin-description table and timing information in the manufacturer datasheet when assigning PCB tracks or validating a substitute.
Where can I find the SN74LS682N pinout?
The authoritative SN74LS682N pinout appears in the manufacturer datasheet SDLS008 at https://www.ti.com/lit/ds/symlink/sn74ls682.pdf. Before laying out a PCB, map every A-input, B-input, output, power, and ground connection from the package drawing. Package compatibility alone is insufficient because the A=B and A>B outputs must also retain their specified polarity and timing behavior.
What are the key specifications of SN74LS682N that engineers should know?
The SN74LS682N is an 8-bit identity and magnitude comparator in a 20-pin PDIP package. Its principal characteristics are two 8-bit binary or BCD input words, active-low A=B and A>B outputs, and totem-pole output circuitry. The device belongs to the 74LS Schottky TTL family. Supply limits, temperature range, propagation delay, and output-current ratings should be taken directly from the manufacturer datasheet before release to production.
Where can I buy SN74LS682N online?
Use the Request a Quote form on this XAIPART product page to request SN74LS682N availability, current commercial terms, and lead time. The form is the appropriate route for obtaining a quotation for the exact 20-pin PDIP ordering code. Engineers should state the required quantity, date code, and any authorized-source or inspection requirements in the request.
What is the price of SN74LS682N?
Current SN74LS682N commercial pricing depends on quantity, date-code requirements, and market conditions. Submit a request through the Request a Quote form on this XAIPART page for the exact ordering code and quantity schedule. The structured commercial fields on this page are maintained separately from technical content so that inquiry handling reflects current sourcing conditions.
What is the lead time for SN74LS682N?
The current lead time for SN74LS682N should be requested through the Request a Quote form on this XAIPART page. Include the required quantity, acceptable date code, and target receiving date. Legacy 74LS logic availability can vary by package and manufacturing channel, so purchasing should be planned only after the supplier confirms a traceable allocation for the exact SN74LS682N ordering code.
Is SN74LS682N in stock?
Stock status for SN74LS682N can change with order volume and date-code constraints, so use the Request a Quote form on this page for a current allocation response. Provide the quantity and required traceability details with the request. This is particularly important for older 74LS devices because an available generic comparator does not necessarily represent an exact, traceable SN74LS682N allocation.
SN74LS682N vs SN74LS684N - which is better for equality detection?
Choose SN74LS682N when the design requires both active-low A=B and active-low A>B results, because those functions are explicitly identified for the SN74LS682. The SN74LS684 belongs to the same family but its exact output complement must be checked in the manufacturer truth table. For a replacement, match every output function and timing characteristic rather than relying on the shared 74LS family name.
What is the difference between SN74LS682N and SN74LS688N?
The SN74LS682N provides equality and greater-than comparison outputs, while the SN74LS688 has a different output set within the related 74LS magnitude-comparator family. According to the family description in manufacturer datasheet SDLS008, not every related type provides the greater-than output in the same way. A PCB footprint match therefore does not establish functional compatibility for either device.
When should I choose SN74LS682N over a CMOS 74HC comparator?
Choose SN74LS682N when the existing board uses five-volt Schottky TTL signal levels and requires the exact active-low A=B and A>B behavior of the 74LS comparator family. Consider a 74HC-class alternative only after checking supply range, input thresholds, output polarity, propagation delay, and pin function in detail. Mixed TTL and CMOS interfaces can require careful treatment of input-current loading and voltage-level compatibility.
Is SN74LS682N suitable for industrial control systems?
The SN74LS682N is functionally suitable for legacy industrial control logic when both operands are eight-bit binary or BCD words and the board already implements its package and output functions. According to the manufacturer datasheet, it compares complete words and provides active-low equality and greater-than outputs. Temperature limits and environmental qualifications should be confirmed against the specific ordering variant before use in new safety-related equipment.
What is the best drop-in replacement for SN74LS682N?
The best drop-in replacement is the part that matches the 20-pin PDIP footprint, supply range, TTL input thresholds, active-low A=B output, active-low A>B output, and propagation timing of the SN74LS682N. Cross-reference listings can suggest candidates, but every candidate must be checked against the manufacturer truth table and electrical characteristics. The available family references do not establish five uniquely verified substitutes, so unqualified alternatives should not be inserted into the design.
Can an ON Semiconductor SN74LS682N replace a Texas Instruments SN74LS682N?
An ON Semiconductor SN74LS682N can be considered for replacement only after its ordering information confirms the same 20-pin PDIP package and its datasheet confirms identical A=B and A>B output behavior, supply requirements, timing, and input levels. The manufacturer identities and sourcing channels differ, so document the comparison and qualification internally. A shared functional description and package name alone do not authorize unconditional substitution.
Are SN74LS682N and other 74LS comparators RoHS compliant?
RoHS compliance must be confirmed for the exact manufacturer ordering code rather than inferred from the 74LS family name. Use the SN74LS682 product page and the manufacturer material-declaration documentation for the applicable status. If the exact declaration is unavailable, treat compliance as unknown and request it through the Request a Quote form before using the part in a new restricted-substance program.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা SN74LS682N — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the SN74LS682N when maintaining or reproducing legacy 74LS logic that compares two eight-bit binary or BCD words and requires active-low A=B and A>B results in a 20-pin PDIP footprint. It is particularly appropriate when existing boards already use Schottky TTL levels and the design depends on the exact LS682 output set. Select an ON Semiconductor- or Motorola-branded SN74LS682N only after confirming the complete ordering information and electrical characteristics. Consider 74HC682N or 74HCT682N when a modern CMOS-compatible implementation is required, but verify input thresholds, supply range, output polarity, and timing rather than assuming automatic interchangeability. Related LS684, LS685, LS687, and LS688 parts should not be selected solely because they are 8-bit comparators; their output complements differ. For new production, validate the complete truth table, signal fan-out, thermal environment, supply margin, and lifecycle requirements before releasing a replacement.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য SN74LS682N SN74LS682N/MOTOROLA DM74LS682N 74HC682N 74HCT682N
Brand Texas Instruments ON Semiconductor Motorola onsemi NXP Semiconductors NXP Semiconductors
Package PDIP-20 PDIP-20 PDIP-20 PDIP-20 PDIP-20 PDIP-20
Comparator Resolution 8 bits 8 bits 8 bits 8 bits 8 bits 8 bits
Logic Technology 74LS Schottky TTL 74LS Schottky TTL 74LS Schottky TTL 74LS Schottky TTL CMOS CMOS with TTL-compatible inputs

মূল পার্থক্যসমূহ

  • Provides both equality and greater-than decisions in one 8-bit comparator (বনামSN74LS684)
  • Uses the 74LS Schottky TTL interface expected by legacy five-volt control boards (বনাম74HC682N)
  • Supports direct TTL interfacing while retaining the familiar 20-pin PDIP footprint (বনাম74HCT682N)

ডিজাইন নোট

Do not treat every 74LS comparator with a 20-pin PDIP package as an interchangeable SN74LS682N. The SN74LS682 specifically provides active-low A=B and A>B outputs, while related LS684, LS685, LS687, and LS688 devices have different output combinations. Create a substitution matrix covering every output, input position, power pin, polarity, and timing condition. A package match that fails the truth-table review can create unsafe or misleading control decisions.

Budget the TTL input current from every bus driver and connected device rather than assuming that all logic inputs present negligible loading. The SN74LS682N uses Schottky TTL levels, and mixed 74LS, 74HCT, or CMOS peripherals can introduce threshold and fan-out problems. Check the manufacturer input-current table, maintain compatible supply arrangements, and use pull-up or pull-down networks where the specified logic levels require them.

Assign the A bus and B bus to separate, consistently routed groups and keep the comparator close enough to avoid unnecessary propagation delay across the board. Maintain a continuous ground reference, avoid stubs on sensitive legacy interconnects, and provide local supply bypassing according to the manufacturer datasheet. For through-hole assembly, inspect sockets and connector contacts for corrosion or increased resistance because marginal connections can create intermittent comparison errors.

Verify that the board supply remains within the SN74LS682N operating range during startup and fault conditions. A stable logic voltage is essential because invalid threshold transitions can cause the equality or greater-than outputs to switch unpredictably. Use the manufacturer power and absolute-maximum ratings when planning new supplies, and preserve adequate current margin for the comparator and every device sharing the same rail.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The exact material-compliance declarations for SN74LS682N are not stated in the available manufacturer-page excerpts. Automotive qualification is not indicated for this device.

ডেটা যাচাই করা হয়েছে: 2026-11-18 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

SN74LS682N datasheet SN74LS682N pinout SN74LS682N datasheet pdf SN74LS682N 20 pin PDIP SN74LS682N comparator Texas Instruments SN74LS682N SN74LS682N replacement SN74LS682N equivalent SN74LS682N vs SN74LS688N SN74LS682N price SN74LS682N stock SN74LS682N 8 bit magnitude comparator

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments SN74LS682N ON Semiconductor Motorola onsemi NXP Semiconductors SN74LS684 SN74LS685 SN74LS687 SN74LS688 DM74LS682N 74HC682N 74HCT682N 8-bit magnitude comparator identity comparator digital comparator combinational logic 74LS Schottky TTL LS TTL parallel logic binary word BCD word totem-pole output active-low output PDIP-20 through-hole package A=B output A>B output industrial control address comparison BCD monitoring legacy test equipment
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন