XC3S1500-5FGG676C - 1.5M Gate Spartan-3 FPGA | AMD Xilinx
MPN: XC3S1500-5FGG676C ✗ জীবনকালের সমাপ্তিXC3S1500-5FGG676C সারাংশ
An FPGA is a programmable semiconductor containing configurable logic blocks, programmable input/output blocks, embedded block RAM, dedicated arithmetic resources, and programmable interconnect. Within the product hierarchy, this device belongs to the Spartan-3 FPGA family, which sits between basic fixed-function logic and higher-density programmable-logic families. Engineers use FPGAs for parallel data processing, protocol bridging, signal generation, image processing, and embedded control where field-updatable hardware is valuable.
The XC3S1500 configuration provides 487 user I/O for high-speed external interfaces, while its 589,824 bits of block RAM support buffering, packet storage, and lookup functions. The -5 speed designation identifies the 725 MHz performance listing associated with this part number. The FG package suffix denotes the 676-pin fine-pitch BGA form used by the Spartan-3 family, and the trailing C identifies the commercial temperature grade.
The 676-pin package makes this device suited to dense boards with substantial routing requirements. A 1.2 V core requires careful power-plane design, local decoupling, and attention to simultaneous switching noise. Because the package contains hundreds of connections, PCB design should follow the AMD Xilinx footprint, pinout, and design-assistance guidance rather than relying on generic BGA conventions.
Typical uses include telecommunications line-card and interface logic, industrial data acquisition, video and image pipelines, storage controllers, and embedded signal-processing systems. The large I/O count is particularly useful for parallel buses, multiple high-speed links, and designs that combine several external interface standards.
When planning a new design, check the Spartan-3 product status before committing the footprint. For an existing XC3S1500 design, preserve the exact power, decoupling, and routing architecture because FPGA configuration and I/O behavior are tightly coupled to the package and reference design. This page consolidates capacity, package, sourcing, and replacement information to support engineering review.
এর জন্য ড্রপ-ইন বিকল্প XC3S1500-5FGG676C — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible XC3S1500-5FGG676C (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Device Type, Temperature Grade, Mounting Type, Programmable Logic Type.
XC3S1500-4FGG676C
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XC3S1500-5FG676C
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XC3S1500-4FGG676I
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XC3S1400A-4FGG676C
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
XC3S1400AN-4FG676C
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
XC3S1500-5FGG676C সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Device Type | Spartan-3 field-programmable gate array (FPGA) |
| System Gates | 1,500,000 gates |
| Logic Cells | 29,952 cells |
| User I/O | 487 pins |
| Block RAM | 589,824 bits |
| Maximum Performance | 725 MHz |
| Process Technology | 90 nm |
| Core Supply Voltage | 1.2 V |
| Operating Supply Voltage Range | 1.14 V to 1.26 V |
| প্যাকেজ | 676-pin fine-pitch ball grid array (FBGA) |
| Package Dimensions | 27 mm x 27 mm |
| মাউন্টিং টাইপ | Surface mount |
| Terminals | 676 balls |
| Terminal Form | Ball |
| Package Shape | Square |
| Junction Temperature Range | 0°C to 85°C |
| Programmable Logic | 29,952 configurable logic elements |
| Device Series | Spartan-3 |
XC3S1500-5FGG676C square পিন কনফিগারেশন গাইড
XC3S1500-5FGG676C (square প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি XC3S1500-5FGG676C.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
XC3S1500-5FGG676C এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Telecommunications Interface and Line-Card Logic, Industrial Data-Acquisition and Control, Video and Image-Processing Pipeline, Storage and Protocol-Conversion Controller, Embedded Signal-Processing and DSP Control, Automotive Test, Control, and Diagnostic Equipment.
Telecommunications Interface and Line-Card Logic
The XC3S1500-5FGG676C fits telecommunications interface cards that combine framing, buffering, control, and several external interfaces. Its 487 user I/O provides substantial connectivity for parallel buses and high-speed transceiver links, while 589,824 bits of block RAM can support packet queues and line buffers. The -5 configuration is associated with performance up to 725 MHz, giving timing margin in pipelined datapaths. A 1.14 V to 1.26 V operating range requires a tightly regulated 1.2 V core and careful PCB decoupling. Because this is a 676-ball FPGA, the design should follow the manufacturer footprint and escape-routing rules rather than relying on a generic BGA land pattern.
সুপারিশকৃত
Industrial Data-Acquisition and Control
The Spartan-3 XC3S1500-5FGG676C is appropriate for industrial acquisition systems that must coordinate sensors, converters, and real-time processing logic. The 487 user I/O can connect multiple parallel sensor channels, while 29,952 logic cells support control sequencing and data-path logic. Its 589,824 bits of block RAM can serve as channel buffering before host transmission. The commercial configuration has a documented 0°C to 85°C junction range, so designers should verify the complete system thermal budget rather than assume it covers wider industrial environments. Use the 1.2 V core supply and 90 nm device structure exactly as specified, and apply the manufacturer power and decoupling recommendations to reduce supply-noise coupling into sensitive acquisition channels.
সুপারিশকৃত
Video and Image-Processing Pipeline
The XC3S1500-5FGG676C can implement parallel video timing, pixel transport, test-pattern generation, and image pre-processing because it combines 29,952 logic cells with 487 user I/O. Block RAM of 589,824 bits accommodates line buffers, synchronization state, and limited frame storage, although larger images require external memory. The -5 speed listing of 725 MHz supports clocked pipelines, but real designs must meet source-synchronous timing through careful pin placement and matched routing. The 676-ball FBGA makes channel assignment and routing density important, so use the package-aware pinout and consider a board stack-up that supports the required I/O and power distribution.
সুপারিশকৃত
Storage and Protocol-Conversion Controller
The XC3S1500-5FGG676C is suitable for storage controllers and protocol converters that require parallel bus handling, finite-state-machine control, and buffered transfers. Its 487 I/O allow multiple command, data, and status signals to be routed without an external complex programmable-logic device. The internal 589,824 bits of block RAM can hold descriptors, command queues, and transfer buffers, while the -5 speed option provides margin for pipelined bus logic. Designers should define all interface timings against the selected speed grade and include timing-constrained I/O paths. Board-level termination, series damping, and clock routing must follow the interface standard and the manufacturer I/O guidelines.
সুপারিশকৃত
Embedded Signal-Processing and DSP Control
The Spartan-3 XC3S1500-5FGG676C can implement parallel filtering, correlation, counting, and fixed-point arithmetic in programmable logic. Its 29,952 logic cells are suitable for moderately parallel datapaths, and 589,824 bits of block RAM support sample windows, coefficient storage, and circular buffers. A listed performance of 725 MHz allows multi-stage pipelines, provided the design is constrained and implemented on the selected -5 speed grade. For interfaces to sensors or converters, the large I/O count reduces the need for intermediary logic. Keep arithmetic datapaths away from high-switching I/O where practical, and validate timing with vendor-supported synthesis and implementation tools for the exact device and package.
সুপারিশকৃত
Automotive Test, Control, and Diagnostic Equipment
The XC3S1500-5FGG676C can be used in external automotive test and diagnostic equipment rather than as an unqualified automotive-grade controller. Its 487 user I/O and large logic capacity allow simultaneous stimulus generation, response capture, and protocol sequencing, while block RAM provides capture buffers. The documented 0°C to 85°C junction range covers many ambient conditions, but chassis temperature, airflow, and nearby heat sources determine the actual junction margin. The dense 676-ball package requires disciplined power planning and verified escape routing. Any deployment connected directly to vehicle electronics should also include isolation, protection, and transient-energy control beyond the FPGA itself.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা XC3S1500-5FGG676C — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | XC3S1500-4FGG676C | XC3S1500-5FG676C | XC3S1500-4FGG676I | XC3S1400A-4FGG676C | XC3S1400AN-4FG676C |
|---|---|---|---|---|---|---|
| Brand | AMD Xilinx | AMD Xilinx | AMD Xilinx | AMD Xilinx | AMD Xilinx | AMD Xilinx |
| Package | 676-pin FBGA | 676-pin FBGA | 676-pin FBGA | 676-pin FBGA | 676-pin FBGA | 676-pin FBGA |
| Device Series | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3A | Spartan-3A |
| Speed Grade | -5; 725 MHz listed performance | -4 | -5; 725 MHz listed performance | -4 | -4 | -4 |
মূল পার্থক্যসমূহ
- Higher listed performance grade within the same Spartan-3 family (বনামXC3S1500-4FGG676C)
- Identical core capacity and interface resources (বনামXC3S1500-5FG676C)
- Industrial temperature option for wider environmental coverage (বনামXC3S1500-4FGG676C)
- Greater logic and I/O density than lower-density Spartan-3A candidates (বনামXC3S1400A-4FGG676C)
ডিজাইন নোট
The XC3S1500-5FGG676C operates from a nominal 1.2 V core within a 1.14 V to 1.26 V range. Use a dedicated, low-noise core supply and follow the manufacturer reference design for bulk and local decoupling. Place high-frequency decoupling directly at the device power balls to suppress simultaneous-switching noise. Validate startup behavior and power-source tolerance across temperature because the usable supply window is narrow.
Do not create the 676-ball land pattern from a generic BGA template. Use the exact AMD Xilinx package drawing, pad dimensions, solder-mask definition, and escape-routing recommendations for the 27 mm x 27 mm FBGA. Verify that the board stack-up supports the escape vias, then constrain configuration, clock, and high-speed I/O routing against the target FPGA timing.
FPGA power and temperature depend on utilization, I/O activity, speed grade, board copper, and airflow. Begin thermal planning with the vendor power-estimation methodology rather than assuming the nominal 1.2 V rail alone. Spread high-current and high-switching nets across the package where the pinout permits, maintain uninterrupted ground planes, and evaluate the junction-temperature margin under worst-case logic activity.
Treat a suffix change as a controlled substitution, not an automatic interchange. The -5 and -4 designations alter performance margin, while FG, FGG, C, and I suffixes affect package, lead-free, and temperature ordering details. Before replacing the target, confirm the exact package drawing, configuration interface, junction-temperature requirement, bitstream compatibility, and timing closure for the substitute part.
কমপ্লায়েন্স তথ্য
The FGG ordering suffix commonly distinguishes a lead-free package option, but the exact declarations are not present in the product records. Confirm RoHS, REACH, halogen, and conflict-minerals documentation from AMD Xilinx for the ordered suffix.