XC3S1500-5FGG676C - 1.5M Gate Spartan-3 FPGA | AMD Xilinx
MPN: XC3S1500-5FGG676C ✗ जीवन की समाप्तिXC3S1500-5FGG676C अवलोकन
An FPGA is a programmable semiconductor containing configurable logic blocks, programmable input/output blocks, embedded block RAM, dedicated arithmetic resources, and programmable interconnect. Within the product hierarchy, this device belongs to the Spartan-3 FPGA family, which sits between basic fixed-function logic and higher-density programmable-logic families. Engineers use FPGAs for parallel data processing, protocol bridging, signal generation, image processing, and embedded control where field-updatable hardware is valuable.
The XC3S1500 configuration provides 487 user I/O for high-speed external interfaces, while its 589,824 bits of block RAM support buffering, packet storage, and lookup functions. The -5 speed designation identifies the 725 MHz performance listing associated with this part number. The FG package suffix denotes the 676-pin fine-pitch BGA form used by the Spartan-3 family, and the trailing C identifies the commercial temperature grade.
The 676-pin package makes this device suited to dense boards with substantial routing requirements. A 1.2 V core requires careful power-plane design, local decoupling, and attention to simultaneous switching noise. Because the package contains hundreds of connections, PCB design should follow the AMD Xilinx footprint, pinout, and design-assistance guidance rather than relying on generic BGA conventions.
Typical uses include telecommunications line-card and interface logic, industrial data acquisition, video and image pipelines, storage controllers, and embedded signal-processing systems. The large I/O count is particularly useful for parallel buses, multiple high-speed links, and designs that combine several external interface standards.
When planning a new design, check the Spartan-3 product status before committing the footprint. For an existing XC3S1500 design, preserve the exact power, decoupling, and routing architecture because FPGA configuration and I/O behavior are tightly coupled to the package and reference design. This page consolidates capacity, package, sourcing, and replacement information to support engineering review.
के लिए ड्रॉप-इन विकल्प XC3S1500-5FGG676C — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं XC3S1500-5FGG676C (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Device Type, Temperature Grade, Mounting Type, Programmable Logic Type.
XC3S1500-4FGG676C
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →XC3S1500-5FG676C
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →XC3S1500-4FGG676I
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →XC3S1400A-4FGG676C
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XC3S1400AN-4FG676C
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XC3S1500-5FGG676C Maximum Ratings और Electrical Characteristics
| Device Type | Spartan-3 field-programmable gate array (FPGA) |
| System Gates | 1,500,000 gates |
| Logic Cells | 29,952 cells |
| User I/O | 487 pins |
| Block RAM | 589,824 bits |
| Maximum Performance | 725 MHz |
| Process Technology | 90 nm |
| Core Supply Voltage | 1.2 V |
| Operating Supply Voltage Range | 1.14 V to 1.26 V |
| पैकेज | 676-pin fine-pitch ball grid array (FBGA) |
| Package Dimensions | 27 mm x 27 mm |
| माउंटिंग प्रकार | Surface mount |
| Terminals | 676 balls |
| Terminal Form | Ball |
| Package Shape | Square |
| Junction Temperature Range | 0°C to 85°C |
| Programmable Logic | 29,952 configurable logic elements |
| Device Series | Spartan-3 |
XC3S1500-5FGG676C square पिन कॉन्फ़िगरेशन गाइड
XC3S1500-5FGG676C (square पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: XC3S1500-5FGG676C.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
XC3S1500-5FGG676C के लिए उपयुक्त है 6 अनुप्रयोगs: Telecommunications Interface and Line-Card Logic, Industrial Data-Acquisition and Control, Video and Image-Processing Pipeline, Storage and Protocol-Conversion Controller, Embedded Signal-Processing and DSP Control, Automotive Test, Control, and Diagnostic Equipment.
Telecommunications Interface and Line-Card Logic
The XC3S1500-5FGG676C fits telecommunications interface cards that combine framing, buffering, control, and several external interfaces. Its 487 user I/O provides substantial connectivity for parallel buses and high-speed transceiver links, while 589,824 bits of block RAM can support packet queues and line buffers. The -5 configuration is associated with performance up to 725 MHz, giving timing margin in pipelined datapaths. A 1.14 V to 1.26 V operating range requires a tightly regulated 1.2 V core and careful PCB decoupling. Because this is a 676-ball FPGA, the design should follow the manufacturer footprint and escape-routing rules rather than relying on a generic BGA land pattern.
अनुशंसित
Industrial Data-Acquisition and Control
The Spartan-3 XC3S1500-5FGG676C is appropriate for industrial acquisition systems that must coordinate sensors, converters, and real-time processing logic. The 487 user I/O can connect multiple parallel sensor channels, while 29,952 logic cells support control sequencing and data-path logic. Its 589,824 bits of block RAM can serve as channel buffering before host transmission. The commercial configuration has a documented 0°C to 85°C junction range, so designers should verify the complete system thermal budget rather than assume it covers wider industrial environments. Use the 1.2 V core supply and 90 nm device structure exactly as specified, and apply the manufacturer power and decoupling recommendations to reduce supply-noise coupling into sensitive acquisition channels.
अनुशंसित
Video and Image-Processing Pipeline
The XC3S1500-5FGG676C can implement parallel video timing, pixel transport, test-pattern generation, and image pre-processing because it combines 29,952 logic cells with 487 user I/O. Block RAM of 589,824 bits accommodates line buffers, synchronization state, and limited frame storage, although larger images require external memory. The -5 speed listing of 725 MHz supports clocked pipelines, but real designs must meet source-synchronous timing through careful pin placement and matched routing. The 676-ball FBGA makes channel assignment and routing density important, so use the package-aware pinout and consider a board stack-up that supports the required I/O and power distribution.
अनुशंसित
Storage and Protocol-Conversion Controller
The XC3S1500-5FGG676C is suitable for storage controllers and protocol converters that require parallel bus handling, finite-state-machine control, and buffered transfers. Its 487 I/O allow multiple command, data, and status signals to be routed without an external complex programmable-logic device. The internal 589,824 bits of block RAM can hold descriptors, command queues, and transfer buffers, while the -5 speed option provides margin for pipelined bus logic. Designers should define all interface timings against the selected speed grade and include timing-constrained I/O paths. Board-level termination, series damping, and clock routing must follow the interface standard and the manufacturer I/O guidelines.
अनुशंसित
Embedded Signal-Processing and DSP Control
The Spartan-3 XC3S1500-5FGG676C can implement parallel filtering, correlation, counting, and fixed-point arithmetic in programmable logic. Its 29,952 logic cells are suitable for moderately parallel datapaths, and 589,824 bits of block RAM support sample windows, coefficient storage, and circular buffers. A listed performance of 725 MHz allows multi-stage pipelines, provided the design is constrained and implemented on the selected -5 speed grade. For interfaces to sensors or converters, the large I/O count reduces the need for intermediary logic. Keep arithmetic datapaths away from high-switching I/O where practical, and validate timing with vendor-supported synthesis and implementation tools for the exact device and package.
अनुशंसित
Automotive Test, Control, and Diagnostic Equipment
The XC3S1500-5FGG676C can be used in external automotive test and diagnostic equipment rather than as an unqualified automotive-grade controller. Its 487 user I/O and large logic capacity allow simultaneous stimulus generation, response capture, and protocol sequencing, while block RAM provides capture buffers. The documented 0°C to 85°C junction range covers many ambient conditions, but chassis temperature, airflow, and nearby heat sources determine the actual junction margin. The dense 676-ball package requires disciplined power planning and verified escape routing. Any deployment connected directly to vehicle electronics should also include isolation, protection, and transient-energy control beyond the FPGA itself.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा XC3S1500-5FGG676C — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | XC3S1500-4FGG676C | XC3S1500-5FG676C | XC3S1500-4FGG676I | XC3S1400A-4FGG676C | XC3S1400AN-4FG676C |
|---|---|---|---|---|---|---|
| Brand | AMD Xilinx | AMD Xilinx | AMD Xilinx | AMD Xilinx | AMD Xilinx | AMD Xilinx |
| Package | 676-pin FBGA | 676-pin FBGA | 676-pin FBGA | 676-pin FBGA | 676-pin FBGA | 676-pin FBGA |
| Device Series | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3A | Spartan-3A |
| Speed Grade | -5; 725 MHz listed performance | -4 | -5; 725 MHz listed performance | -4 | -4 | -4 |
मुख्य विशेषताएँ
- Higher listed performance grade within the same Spartan-3 family (बनामXC3S1500-4FGG676C)
- Identical core capacity and interface resources (बनामXC3S1500-5FG676C)
- Industrial temperature option for wider environmental coverage (बनामXC3S1500-4FGG676C)
- Greater logic and I/O density than lower-density Spartan-3A candidates (बनामXC3S1400A-4FGG676C)
डिज़ाइन नोट्स
The XC3S1500-5FGG676C operates from a nominal 1.2 V core within a 1.14 V to 1.26 V range. Use a dedicated, low-noise core supply and follow the manufacturer reference design for bulk and local decoupling. Place high-frequency decoupling directly at the device power balls to suppress simultaneous-switching noise. Validate startup behavior and power-source tolerance across temperature because the usable supply window is narrow.
Do not create the 676-ball land pattern from a generic BGA template. Use the exact AMD Xilinx package drawing, pad dimensions, solder-mask definition, and escape-routing recommendations for the 27 mm x 27 mm FBGA. Verify that the board stack-up supports the escape vias, then constrain configuration, clock, and high-speed I/O routing against the target FPGA timing.
FPGA power and temperature depend on utilization, I/O activity, speed grade, board copper, and airflow. Begin thermal planning with the vendor power-estimation methodology rather than assuming the nominal 1.2 V rail alone. Spread high-current and high-switching nets across the package where the pinout permits, maintain uninterrupted ground planes, and evaluate the junction-temperature margin under worst-case logic activity.
Treat a suffix change as a controlled substitution, not an automatic interchange. The -5 and -4 designations alter performance margin, while FG, FGG, C, and I suffixes affect package, lead-free, and temperature ordering details. Before replacing the target, confirm the exact package drawing, configuration interface, junction-temperature requirement, bitstream compatibility, and timing closure for the substitute part.
अनुपालन जानकारी
The FGG ordering suffix commonly distinguishes a lead-free package option, but the exact declarations are not present in the product records. Confirm RoHS, REACH, halogen, and conflict-minerals documentation from AMD Xilinx for the ordered suffix.