ラストタイムバイのお知らせ: XC3S1500-5FGG676C は生産終了が近づいています。最終注文日: お問い合わせ. 利用可能な代替部品を見る →
AMD

XC3S1500-5FGG676C - 1.5M Gate Spartan-3 FPGA | AMD Xilinx

部品番号: XC3S1500-5FGG676C ✗ 生産終了
1.2 V Vdss 676-pin fine-pitch ball grid array (FBGA) Package
MOQ: 1 |

XC3S1500-5FGG676C 概要

The AMD Xilinx XC3S1500-5FGG676C is a Spartan-3 field-programmable gate array with 1,500,000 system gates, 29,952 configurable logic elements, 487 user I/O, and 589,824 bits of block RAM in a 676-pin fine-pitch ball grid array. It operates from a 1.2 V supply with a documented 1.14 V to 1.26 V operating range and uses 90 nm FPGA process technology. The device supports operation up to 725 MHz as listed for this configuration.

An FPGA is a programmable semiconductor containing configurable logic blocks, programmable input/output blocks, embedded block RAM, dedicated arithmetic resources, and programmable interconnect. Within the product hierarchy, this device belongs to the Spartan-3 FPGA family, which sits between basic fixed-function logic and higher-density programmable-logic families. Engineers use FPGAs for parallel data processing, protocol bridging, signal generation, image processing, and embedded control where field-updatable hardware is valuable.

The XC3S1500 configuration provides 487 user I/O for high-speed external interfaces, while its 589,824 bits of block RAM support buffering, packet storage, and lookup functions. The -5 speed designation identifies the 725 MHz performance listing associated with this part number. The FG package suffix denotes the 676-pin fine-pitch BGA form used by the Spartan-3 family, and the trailing C identifies the commercial temperature grade.

The 676-pin package makes this device suited to dense boards with substantial routing requirements. A 1.2 V core requires careful power-plane design, local decoupling, and attention to simultaneous switching noise. Because the package contains hundreds of connections, PCB design should follow the AMD Xilinx footprint, pinout, and design-assistance guidance rather than relying on generic BGA conventions.

Typical uses include telecommunications line-card and interface logic, industrial data acquisition, video and image pipelines, storage controllers, and embedded signal-processing systems. The large I/O count is particularly useful for parallel buses, multiple high-speed links, and designs that combine several external interface standards.

When planning a new design, check the Spartan-3 product status before committing the footprint. For an existing XC3S1500 design, preserve the exact power, decoupling, and routing architecture because FPGA configuration and I/O behavior are tightly coupled to the package and reference design. This page consolidates capacity, package, sourcing, and replacement information to support engineering review.

ドロップイン代替品: XC3S1500-5FGG676C — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: XC3S1500-5FGG676C (同一形状・フットプリント) — 相違点: Package, Device Type, Temperature Grade, Mounting Type, Programmable Logic Type.

AMD
Package: 676-pin FBGA, 27 mm x 27 mm
Device Type: Spartan-3 XA Field-Programmable Gate Array
Programmable Logic Type: FPGA
比較対象 XC3S1500-5FGG676C →
AMD
Package: 676-pin BGA
Temperature Grade: Industrial
Programmable Logic Type: SRAM-based FPGA
比較対象 XC3S1500-5FGG676C →
AMD
Temperature Grade: Commercial, 0°C to 85°C
Mounting Type: Surface-mount
Programmable Logic Type: FPGA
比較対象 XC3S1500-5FGG676C →
AMD
Package: 676-pin FBGA
Device Type: Spartan-3 Field Programmable Gate Array (FPGA)
比較対象 XC3S1500-5FGG676C →
AMD
Temperature Grade: Commercial (C suffix)
比較対象 XC3S1500-5FGG676C →

XC3S1500-4FGG676C

✅ ドロップイン
AMD
📦 676-pin FBGA
Spartan-3 field-programmable gate array (FPGA) · 1,500,000 gates · 29,952 cells · 487 I/O · 1.2 V · 630 MHz · 90 nm · -4 speed grade

価格はお問い合わせください

データシートを見る →

XC3S1500-5FG676C

✅ ドロップイン
AMD
📦 676-pin FBGA
Spartan-3 field-programmable gate array (FPGA) · Spartan-3 · 1,500,000 gates · 29,952 cells · 589,824 bits · 487 I/O · 1.2 V · 725 MHz

価格はお問い合わせください

データシートを見る →

XC3S1500-4FGG676I

✅ ドロップイン
AMD
📦 676-pin FBGA
Spartan-3 Field Programmable Gate Array (FPGA) · 1,500,000 gates · 29,952 cells · 630 MHz · 1.2 V · 90 nm · -4 · 676-pin FBGA

価格はお問い合わせください

データシートを見る →

XC3S1400A-4FGG676C

✅ ドロップイン
📦 676-pin FBGA
lower-density Spartan-3A device and -4 speed grade versus the XC3S1500-5 configuration

📋 参考代替品(カタログ未掲載)

XC3S1400AN-4FG676C

✅ ドロップイン
📦 676-pin FBGA
lower-density Spartan-3A device with a different package suffix and -4 speed grade

📋 参考代替品(カタログ未掲載)

XC3S1500-5FGG676C 最大定格&電気的特性

Device Type Spartan-3 field-programmable gate array (FPGA)
System Gates 1,500,000 gates
Logic Cells 29,952 cells
User I/O 487 pins
Block RAM 589,824 bits
Maximum Performance 725 MHz
Process Technology 90 nm
Core Supply Voltage 1.2 V
Operating Supply Voltage Range 1.14 V to 1.26 V
パッケージ 676-pin fine-pitch ball grid array (FBGA)
Package Dimensions 27 mm x 27 mm
実装タイプ Surface mount
Terminals 676 balls
Terminal Form Ball
Package Shape Square
Junction Temperature Range 0°C to 85°C
Programmable Logic 29,952 configurable logic elements
Device Series Spartan-3

XC3S1500-5FGG676C square ピン配置ガイド

XC3S1500-5FGG676C (square パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

XC3S1500-5FGG676C の square パッケージピン配置図

詳細なピン配置データはありません: XC3S1500-5FGG676C.

詳細は データシート をご参照ください。

主な用途

XC3S1500-5FGG676C の用途: 6 件s: Telecommunications Interface and Line-Card Logic, Industrial Data-Acquisition and Control, Video and Image-Processing Pipeline, Storage and Protocol-Conversion Controller, Embedded Signal-Processing and DSP Control, Automotive Test, Control, and Diagnostic Equipment.

🌐

Telecommunications Interface and Line-Card Logic

The XC3S1500-5FGG676C fits telecommunications interface cards that combine framing, buffering, control, and several external interfaces. Its 487 user I/O provides substantial connectivity for parallel buses and high-speed transceiver links, while 589,824 bits of block RAM can support packet queues and line buffers. The -5 configuration is associated with performance up to 725 MHz, giving timing margin in pipelined datapaths. A 1.14 V to 1.26 V operating range requires a tightly regulated 1.2 V core and careful PCB decoupling. Because this is a 676-ball FPGA, the design should follow the manufacturer footprint and escape-routing rules rather than relying on a generic BGA land pattern.

🏭

Industrial Data-Acquisition and Control

The Spartan-3 XC3S1500-5FGG676C is appropriate for industrial acquisition systems that must coordinate sensors, converters, and real-time processing logic. The 487 user I/O can connect multiple parallel sensor channels, while 29,952 logic cells support control sequencing and data-path logic. Its 589,824 bits of block RAM can serve as channel buffering before host transmission. The commercial configuration has a documented 0°C to 85°C junction range, so designers should verify the complete system thermal budget rather than assume it covers wider industrial environments. Use the 1.2 V core supply and 90 nm device structure exactly as specified, and apply the manufacturer power and decoupling recommendations to reduce supply-noise coupling into sensitive acquisition channels.

📺

Video and Image-Processing Pipeline

The XC3S1500-5FGG676C can implement parallel video timing, pixel transport, test-pattern generation, and image pre-processing because it combines 29,952 logic cells with 487 user I/O. Block RAM of 589,824 bits accommodates line buffers, synchronization state, and limited frame storage, although larger images require external memory. The -5 speed listing of 725 MHz supports clocked pipelines, but real designs must meet source-synchronous timing through careful pin placement and matched routing. The 676-ball FBGA makes channel assignment and routing density important, so use the package-aware pinout and consider a board stack-up that supports the required I/O and power distribution.

🖥️

Storage and Protocol-Conversion Controller

The XC3S1500-5FGG676C is suitable for storage controllers and protocol converters that require parallel bus handling, finite-state-machine control, and buffered transfers. Its 487 I/O allow multiple command, data, and status signals to be routed without an external complex programmable-logic device. The internal 589,824 bits of block RAM can hold descriptors, command queues, and transfer buffers, while the -5 speed option provides margin for pipelined bus logic. Designers should define all interface timings against the selected speed grade and include timing-constrained I/O paths. Board-level termination, series damping, and clock routing must follow the interface standard and the manufacturer I/O guidelines.

⚙️

Embedded Signal-Processing and DSP Control

The Spartan-3 XC3S1500-5FGG676C can implement parallel filtering, correlation, counting, and fixed-point arithmetic in programmable logic. Its 29,952 logic cells are suitable for moderately parallel datapaths, and 589,824 bits of block RAM support sample windows, coefficient storage, and circular buffers. A listed performance of 725 MHz allows multi-stage pipelines, provided the design is constrained and implemented on the selected -5 speed grade. For interfaces to sensors or converters, the large I/O count reduces the need for intermediary logic. Keep arithmetic datapaths away from high-switching I/O where practical, and validate timing with vendor-supported synthesis and implementation tools for the exact device and package.

🚗

Automotive Test, Control, and Diagnostic Equipment

The XC3S1500-5FGG676C can be used in external automotive test and diagnostic equipment rather than as an unqualified automotive-grade controller. Its 487 user I/O and large logic capacity allow simultaneous stimulus generation, response capture, and protocol sequencing, while block RAM provides capture buffers. The documented 0°C to 85°C junction range covers many ambient conditions, but chassis temperature, airflow, and nearby heat sources determine the actual junction margin. The dense 676-ball package requires disciplined power planning and verified escape routing. Any deployment connected directly to vehicle electronics should also include isolation, protection, and transient-energy control beyond the FPGA itself.

What is the AMD Xilinx XC3S1500-5FGG676C?
The AMD Xilinx XC3S1500-5FGG676C is a Spartan-3 FPGA with 1,500,000 system gates, 29,952 logic cells, 487 user I/O, and 589,824 bits of block RAM. It is packaged in a 676-pin FBGA and operates from a 1.14 V to 1.26 V supply. According to the product listings, the -5 configuration supports performance up to 725 MHz on 90 nm process technology.
How many I/O pins and block RAM does the XC3S1500-5FGG676C have?
The XC3S1500-5FGG676C provides 487 user I/O and 589,824 bits of block RAM. These resources suit designs with parallel buses, control logic, packet buffers, and multiple external interfaces. AMD and distributor product records identify the same 29,952 logic cells, 1.5 million system gates, and 676-ball package, allowing capacity planning before PCB layout begins.
What is the operating voltage of the XC3S1500-5FGG676C?
The XC3S1500-5FGG676C operates over a 1.14 V to 1.26 V supply range, with 1.2 V listed as the nominal core voltage. The range leaves only 60 mV between the lower and upper limits, so power-source tolerance, startup sequencing, and local decoupling must follow the manufacturer reference design. Do not treat the operating range as interchangeable with a general 1.2 V rail.
Where can I download the XC3S1500-5FGG676C datasheet?
The AMD Xilinx Spartan-3 family datasheet is available through the manufacturer's product documentation at https://www.amd.com/content/dam/amd/en/documents/xilinx-data-sheets/ds180.pdf. It contains the device architecture, electrical characteristics, package information, and ordering data for the Spartan-3 family. Use the pinout and footprint sections together with the exact part-number suffix when designing a 676-ball board.
Where is the XC3S1500-5FGG676C pinout and 676-ball footprint located?
The authoritative pinout and package drawing are in the AMD Spartan-3 family datasheet, specifically its XC3S1500 and 676-pin package sections. The XC3S1500-5FGG676C uses a square 27 mm x 27 mm fine-pitch BGA with 676 balls. Use the manufacturer symbol and escape-routing guidance because generic BGA layout assumptions can break power, configuration, and differential-I/O routing.
What can replace the XC3S1500-5FGG676C?
The closest documented alternatives include XC3S1500-4FGG676C, XC3S1500-5FG676C, and XC3S1500-4FGG676I, each associated with the same Spartan-3 device family and 676-pin package family. Their suffix differences affect speed grade, package code, or temperature grade. Confirm timing closure, voltage, and PCB compatibility before treating any one as a direct substitution.
Can XC3S1500-5FG676C replace the XC3S1500-5FGG676C?
XC3S1500-5FG676C is a close same-family option with the same 1,500,000 system gates, 29,952 logic cells, 487 I/O, 589,824 RAM bits, 1.2 V supply, and 676-pin FBGA format listed for the target. The package and ordering codes differ between FG and FGG, so inspect the manufacturer ballout and board footprint before assembly. Verify the exact suffix requirements for sourcing and temperature grade.
Is XC3S1500-5FGG676C vs XC3S1500-4FGG676C better for timing?
The -5 XC3S1500-5FGG676C is the faster-listed option, with a 725 MHz performance figure associated with the -5 configuration, while XC3S1500-4FGG676C belongs to the -4 speed grade. For an existing board with timing margin, the -4 part may be a practical lifecycle option; for a new design requiring maximum performance margin, retain the -5 grade. Confirm device-specific timing from the Spartan-3 data sheet.
When should I choose the XC3S1500-5FGG676C over a lower-density FPGA?
Choose the XC3S1500-5FGG676C when the design needs more than 487 user I/O, more than 29,952 logic cells, or substantial on-chip buffering. Its 589,824 bits of block RAM and large 676-ball package reduce the need for external devices. A lower-density FPGA is preferable when the design fits comfortably within fewer I/O and requires a smaller, easier-routed package.
Is the XC3S1500-5FGG676C suitable for industrial and telecommunications designs?
The XC3S1500-5FGG676C is suitable for interface-rich industrial and telecom control designs when its documented 0°C to 85°C junction range covers the product's operating environment. Its 487 user I/O and 589,824 bits of block RAM support acquisition, buffering, and parallel interface tasks. For extended-temperature deployment, verify an appropriately graded Spartan-3 option rather than assuming commercial-grade suitability.
Does the XC3S1500-5FGG676C need external memory for a design?
The XC3S1500-5FGG676C includes 589,824 bits of block RAM, which can hold approximately 73,728 bytes when every bit is used for data storage. That capacity can absorb small packet buffers, lookup tables, and interface registers. Large frame buffers, wide data-capture arrays, or multi-megabyte designs still require external memory connected through the FPGA's parallel interface resources.
What is the best AMD Xilinx equivalent for the XC3S1500-5FGG676C?
The best documented AMD Xilinx equivalent depends on the constraint being preserved. XC3S1500-5FG676C retains the -5 speed grade and the same principal capacity figures, while XC3S1500-4FGG676C and XC3S1500-4FGG676I provide lower-speed alternatives with different suffix codes. A drop-in decision requires matching the board footprint, junction-temperature requirement, configuration method, and timing constraints.
Where can I buy the XC3S1500-5FGG676C online?
Use the Request a Quote form on this page to request the current XC3S1500-5FGG676C price, stock position, and lead time. The exact suffix is important because Spartan-3 listings cover different speed grades, package codes, and temperature grades. A quotation request should include the required quantity, date code preference, and any programming or traceability requirements.
What is the current price and stock of the XC3S1500-5FGG676C?
Current commercial terms for the XC3S1500-5FGG676C are obtained through the Request a Quote form on this page. Because supply and price can change by suffix, quantity, and date code, submit the complete MPN with your required quantity. If the part is unavailable, ask for equivalent suffix options and a lead-time estimate rather than accepting an unspecified FPGA substitution.
What is the lead time for the XC3S1500-5FGG676C?
The current lead time should be requested through the Request a Quote form on this page using the complete XC3S1500-5FGG676C suffix. Lead time depends on inventory, date-code availability, assembly requirements, and order quantity. For production planning, also confirm whether any proposed alternative is an exact package match or only a functionally similar Spartan-3 device.
What are the key specifications engineers should know about the XC3S1500-5FGG676C?
The key specifications are 1,500,000 system gates, 29,952 logic cells, 487 user I/O, 589,824 bits of block RAM, a 725 MHz listed performance figure, 1.2 V nominal core voltage, and a 676-pin FBGA package. The device uses 90 nm technology and has a documented 0°C to 85°C junction range for the related commercial configuration. These figures define logic capacity, interface breadth, memory, and board-routing requirements.

エンジニアリング参考データ: XC3S1500-5FGG676C — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the XC3S1500-5FGG676C when an existing or new design benefits from the -5 grade, 29,952 logic cells, 487 user I/O, and 589,824 bits of block RAM, and its 676-ball footprint is already committed. Select XC3S1500-4FGG676C when the -4 speed grade meets timing and you need a same-family lower-grade sourcing option. Consider XC3S1500-5FG676C when its package ordering code is acceptable, but verify the exact board symbol and assembly requirements. Use XC3S1500-4FGG676I when industrial temperature coverage is required and the -4 timing margin is sufficient. The Spartan-3A candidates require a careful resource audit because their lower density may not fit the same design without modification. For every replacement, verify the manufacturer pinout, package drawing, configuration method, temperature grade, and timing results before releasing a PCB or production order.

代替品との比較

パラメータ この製品 XC3S1500-4FGG676C XC3S1500-5FG676C XC3S1500-4FGG676I XC3S1400A-4FGG676C XC3S1400AN-4FG676C
Brand AMD Xilinx AMD Xilinx AMD Xilinx AMD Xilinx AMD Xilinx AMD Xilinx
Package 676-pin FBGA 676-pin FBGA 676-pin FBGA 676-pin FBGA 676-pin FBGA 676-pin FBGA
Device Series Spartan-3 Spartan-3 Spartan-3 Spartan-3 Spartan-3A Spartan-3A
Speed Grade -5; 725 MHz listed performance -4 -5; 725 MHz listed performance -4 -4 -4

主な差別化要因

  • Higher listed performance grade within the same Spartan-3 family (vs XC3S1500-4FGG676C)
  • Identical core capacity and interface resources (vs XC3S1500-5FG676C)
  • Industrial temperature option for wider environmental coverage (vs XC3S1500-4FGG676C)
  • Greater logic and I/O density than lower-density Spartan-3A candidates (vs XC3S1400A-4FGG676C)

設計ノート

The XC3S1500-5FGG676C operates from a nominal 1.2 V core within a 1.14 V to 1.26 V range. Use a dedicated, low-noise core supply and follow the manufacturer reference design for bulk and local decoupling. Place high-frequency decoupling directly at the device power balls to suppress simultaneous-switching noise. Validate startup behavior and power-source tolerance across temperature because the usable supply window is narrow.

Do not create the 676-ball land pattern from a generic BGA template. Use the exact AMD Xilinx package drawing, pad dimensions, solder-mask definition, and escape-routing recommendations for the 27 mm x 27 mm FBGA. Verify that the board stack-up supports the escape vias, then constrain configuration, clock, and high-speed I/O routing against the target FPGA timing.

FPGA power and temperature depend on utilization, I/O activity, speed grade, board copper, and airflow. Begin thermal planning with the vendor power-estimation methodology rather than assuming the nominal 1.2 V rail alone. Spread high-current and high-switching nets across the package where the pinout permits, maintain uninterrupted ground planes, and evaluate the junction-temperature margin under worst-case logic activity.

Treat a suffix change as a controlled substitution, not an automatic interchange. The -5 and -4 designations alter performance margin, while FG, FGG, C, and I suffixes affect package, lead-free, and temperature ordering details. Before replacing the target, confirm the exact package drawing, configuration interface, junction-temperature requirement, bitstream compatibility, and timing closure for the substitute part.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The FGG ordering suffix commonly distinguishes a lead-free package option, but the exact declarations are not present in the product records. Confirm RoHS, REACH, halogen, and conflict-minerals documentation from AMD Xilinx for the ordered suffix.

関連検索

xc3s1500 4fgg320c xc3s1500 4fgg456c xilinx xc3s1500 XC3S1500-5FGG676C datasheet XC3S1500-5FGG676C pinout XC3S1500-5FGG676C footprint XC3S1500-5FGG676C price XC3S1500-5FGG676C stock XC3S1500-5FGG676C equivalent XC3S1500-5FGG676C replacement XC3S1500-5FGG676C vs XC3S1500-5FG676C AMD Xilinx XC3S1500-5FGG676C XC3S1500 676 FBGA FPGA XC3S1500 589824 block RAM

関連部品&用語

AMD Xilinx XC3S1500-5FGG676C XC3S1500 Spartan-3 field-programmable gate array FPGA programmable logic configurable logic block input/output block block RAM BRAM system gates logic cells fine-pitch ball grid array FBGA 676-pin BGA surface-mount package 90 nm process technology 1.2 V core supply 725 MHz performance 487 user I/O 589,824 bits of RAM programmable interconnect signal processing industrial data acquisition
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示