XC3S1500-5FGG676C - 1.5M Gate Spartan-3 FPGA | AMD Xilinx
부품 번호: XC3S1500-5FGG676C ✗ 단종XC3S1500-5FGG676C 개요
An FPGA is a programmable semiconductor containing configurable logic blocks, programmable input/output blocks, embedded block RAM, dedicated arithmetic resources, and programmable interconnect. Within the product hierarchy, this device belongs to the Spartan-3 FPGA family, which sits between basic fixed-function logic and higher-density programmable-logic families. Engineers use FPGAs for parallel data processing, protocol bridging, signal generation, image processing, and embedded control where field-updatable hardware is valuable.
The XC3S1500 configuration provides 487 user I/O for high-speed external interfaces, while its 589,824 bits of block RAM support buffering, packet storage, and lookup functions. The -5 speed designation identifies the 725 MHz performance listing associated with this part number. The FG package suffix denotes the 676-pin fine-pitch BGA form used by the Spartan-3 family, and the trailing C identifies the commercial temperature grade.
The 676-pin package makes this device suited to dense boards with substantial routing requirements. A 1.2 V core requires careful power-plane design, local decoupling, and attention to simultaneous switching noise. Because the package contains hundreds of connections, PCB design should follow the AMD Xilinx footprint, pinout, and design-assistance guidance rather than relying on generic BGA conventions.
Typical uses include telecommunications line-card and interface logic, industrial data acquisition, video and image pipelines, storage controllers, and embedded signal-processing systems. The large I/O count is particularly useful for parallel buses, multiple high-speed links, and designs that combine several external interface standards.
When planning a new design, check the Spartan-3 product status before committing the footprint. For an existing XC3S1500 design, preserve the exact power, decoupling, and routing architecture because FPGA configuration and I/O behavior are tightly coupled to the package and reference design. This page consolidates capacity, package, sourcing, and replacement information to support engineering review.
드롭인 대체품: XC3S1500-5FGG676C — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: XC3S1500-5FGG676C (동일 폼 팩터 및 풋프린트) — 차이점: Package, Device Type, Temperature Grade, Mounting Type, Programmable Logic Type.
XC3S1500-4FGG676C
✅ 드롭인가격 문의
데이터시트 보기 →XC3S1500-5FG676C
✅ 드롭인가격 문의
데이터시트 보기 →XC3S1500-4FGG676I
✅ 드롭인가격 문의
데이터시트 보기 →XC3S1400A-4FGG676C
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XC3S1400AN-4FG676C
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XC3S1500-5FGG676C 최대 정격 & 전기적 특성
| Device Type | Spartan-3 field-programmable gate array (FPGA) |
| System Gates | 1,500,000 gates |
| Logic Cells | 29,952 cells |
| User I/O | 487 pins |
| Block RAM | 589,824 bits |
| Maximum Performance | 725 MHz |
| Process Technology | 90 nm |
| Core Supply Voltage | 1.2 V |
| Operating Supply Voltage Range | 1.14 V to 1.26 V |
| 패키지 | 676-pin fine-pitch ball grid array (FBGA) |
| Package Dimensions | 27 mm x 27 mm |
| 실장 유형 | Surface mount |
| Terminals | 676 balls |
| Terminal Form | Ball |
| Package Shape | Square |
| Junction Temperature Range | 0°C to 85°C |
| Programmable Logic | 29,952 configurable logic elements |
| Device Series | Spartan-3 |
XC3S1500-5FGG676C square 핀 구성 가이드
XC3S1500-5FGG676C(square 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XC3S1500-5FGG676C.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XC3S1500-5FGG676C 적합 용도: 6 애플리케이션s: Telecommunications Interface and Line-Card Logic, Industrial Data-Acquisition and Control, Video and Image-Processing Pipeline, Storage and Protocol-Conversion Controller, Embedded Signal-Processing and DSP Control, Automotive Test, Control, and Diagnostic Equipment.
Telecommunications Interface and Line-Card Logic
The XC3S1500-5FGG676C fits telecommunications interface cards that combine framing, buffering, control, and several external interfaces. Its 487 user I/O provides substantial connectivity for parallel buses and high-speed transceiver links, while 589,824 bits of block RAM can support packet queues and line buffers. The -5 configuration is associated with performance up to 725 MHz, giving timing margin in pipelined datapaths. A 1.14 V to 1.26 V operating range requires a tightly regulated 1.2 V core and careful PCB decoupling. Because this is a 676-ball FPGA, the design should follow the manufacturer footprint and escape-routing rules rather than relying on a generic BGA land pattern.
추천
Industrial Data-Acquisition and Control
The Spartan-3 XC3S1500-5FGG676C is appropriate for industrial acquisition systems that must coordinate sensors, converters, and real-time processing logic. The 487 user I/O can connect multiple parallel sensor channels, while 29,952 logic cells support control sequencing and data-path logic. Its 589,824 bits of block RAM can serve as channel buffering before host transmission. The commercial configuration has a documented 0°C to 85°C junction range, so designers should verify the complete system thermal budget rather than assume it covers wider industrial environments. Use the 1.2 V core supply and 90 nm device structure exactly as specified, and apply the manufacturer power and decoupling recommendations to reduce supply-noise coupling into sensitive acquisition channels.
추천
Video and Image-Processing Pipeline
The XC3S1500-5FGG676C can implement parallel video timing, pixel transport, test-pattern generation, and image pre-processing because it combines 29,952 logic cells with 487 user I/O. Block RAM of 589,824 bits accommodates line buffers, synchronization state, and limited frame storage, although larger images require external memory. The -5 speed listing of 725 MHz supports clocked pipelines, but real designs must meet source-synchronous timing through careful pin placement and matched routing. The 676-ball FBGA makes channel assignment and routing density important, so use the package-aware pinout and consider a board stack-up that supports the required I/O and power distribution.
추천
Storage and Protocol-Conversion Controller
The XC3S1500-5FGG676C is suitable for storage controllers and protocol converters that require parallel bus handling, finite-state-machine control, and buffered transfers. Its 487 I/O allow multiple command, data, and status signals to be routed without an external complex programmable-logic device. The internal 589,824 bits of block RAM can hold descriptors, command queues, and transfer buffers, while the -5 speed option provides margin for pipelined bus logic. Designers should define all interface timings against the selected speed grade and include timing-constrained I/O paths. Board-level termination, series damping, and clock routing must follow the interface standard and the manufacturer I/O guidelines.
추천
Embedded Signal-Processing and DSP Control
The Spartan-3 XC3S1500-5FGG676C can implement parallel filtering, correlation, counting, and fixed-point arithmetic in programmable logic. Its 29,952 logic cells are suitable for moderately parallel datapaths, and 589,824 bits of block RAM support sample windows, coefficient storage, and circular buffers. A listed performance of 725 MHz allows multi-stage pipelines, provided the design is constrained and implemented on the selected -5 speed grade. For interfaces to sensors or converters, the large I/O count reduces the need for intermediary logic. Keep arithmetic datapaths away from high-switching I/O where practical, and validate timing with vendor-supported synthesis and implementation tools for the exact device and package.
추천
Automotive Test, Control, and Diagnostic Equipment
The XC3S1500-5FGG676C can be used in external automotive test and diagnostic equipment rather than as an unqualified automotive-grade controller. Its 487 user I/O and large logic capacity allow simultaneous stimulus generation, response capture, and protocol sequencing, while block RAM provides capture buffers. The documented 0°C to 85°C junction range covers many ambient conditions, but chassis temperature, airflow, and nearby heat sources determine the actual junction margin. The dense 676-ball package requires disciplined power planning and verified escape routing. Any deployment connected directly to vehicle electronics should also include isolation, protection, and transient-energy control beyond the FPGA itself.
추천
추천 제품 요약
엔지니어링 참조 데이터: XC3S1500-5FGG676C — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XC3S1500-4FGG676C | XC3S1500-5FG676C | XC3S1500-4FGG676I | XC3S1400A-4FGG676C | XC3S1400AN-4FG676C |
|---|---|---|---|---|---|---|
| Brand | AMD Xilinx | AMD Xilinx | AMD Xilinx | AMD Xilinx | AMD Xilinx | AMD Xilinx |
| Package | 676-pin FBGA | 676-pin FBGA | 676-pin FBGA | 676-pin FBGA | 676-pin FBGA | 676-pin FBGA |
| Device Series | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3A | Spartan-3A |
| Speed Grade | -5; 725 MHz listed performance | -4 | -5; 725 MHz listed performance | -4 | -4 | -4 |
주요 차별점
- Higher listed performance grade within the same Spartan-3 family (vs XC3S1500-4FGG676C)
- Identical core capacity and interface resources (vs XC3S1500-5FG676C)
- Industrial temperature option for wider environmental coverage (vs XC3S1500-4FGG676C)
- Greater logic and I/O density than lower-density Spartan-3A candidates (vs XC3S1400A-4FGG676C)
설계 노트
The XC3S1500-5FGG676C operates from a nominal 1.2 V core within a 1.14 V to 1.26 V range. Use a dedicated, low-noise core supply and follow the manufacturer reference design for bulk and local decoupling. Place high-frequency decoupling directly at the device power balls to suppress simultaneous-switching noise. Validate startup behavior and power-source tolerance across temperature because the usable supply window is narrow.
Do not create the 676-ball land pattern from a generic BGA template. Use the exact AMD Xilinx package drawing, pad dimensions, solder-mask definition, and escape-routing recommendations for the 27 mm x 27 mm FBGA. Verify that the board stack-up supports the escape vias, then constrain configuration, clock, and high-speed I/O routing against the target FPGA timing.
FPGA power and temperature depend on utilization, I/O activity, speed grade, board copper, and airflow. Begin thermal planning with the vendor power-estimation methodology rather than assuming the nominal 1.2 V rail alone. Spread high-current and high-switching nets across the package where the pinout permits, maintain uninterrupted ground planes, and evaluate the junction-temperature margin under worst-case logic activity.
Treat a suffix change as a controlled substitution, not an automatic interchange. The -5 and -4 designations alter performance margin, while FG, FGG, C, and I suffixes affect package, lead-free, and temperature ordering details. Before replacing the target, confirm the exact package drawing, configuration interface, junction-temperature requirement, bitstream compatibility, and timing closure for the substitute part.
규정 준수 정보
The FGG ordering suffix commonly distinguishes a lead-free package option, but the exact declarations are not present in the product records. Confirm RoHS, REACH, halogen, and conflict-minerals documentation from AMD Xilinx for the ordered suffix.