AMD

XC7A100T-2FTG256I - 101440 Logic Cell Artix-7 FPGA | AMD

MPN: XC7A100T-2FTG256I ✓ সক্রিয়
FTBGA-256 Package -2 Speed
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

XC7A100T-2FTG256I সারাংশ

AMD XC7A100T-2FTG256I is an Artix-7 field-programmable gate array with 101,440 logic cells, 170 I/O pins, and an FTBGA-256 package. The device is built on 28 nm FPGA technology and is positioned for cost-sensitive, power-efficient industrial, control, video, image-processing, and sensor-fusion designs. Its -2 speed grade and industrial temperature designation support designs requiring predictable operation across extended temperature ranges.

An FPGA is a programmable semiconductor containing configurable logic blocks, programmable interconnect, block RAM, and digital signal-processing resources. Within the semiconductor hierarchy, the Artix-7 family sits below larger FPGA families and provides a balance of logic density, performance, cost, and power efficiency. The XC7A100T device family is appropriate when designers need more parallelism and dedicated processing resources than a small microcontroller or discrete logic implementation can provide.

The XC7A100T-2FTG256I provides 101,440 logic cells, 170 I/O pins, 628 DSP slices, 4,976,640 bits of block RAM, and 170 maximum I/O according to the manufacturer Artix-7 documentation. Its 28 nm process supports high performance per watt while remaining oriented toward cost-sensitive applications. The FTBGA-256 package provides a compact surface-mount option for high-density PCB layouts, although its fine-pitch ball array requires careful escape-routing and assembly planning.

The -2 suffix identifies the performance grade, while FTG256 identifies the package configuration and I denotes the industrial temperature option. The Artix-7 architecture supports configuration from external flash, processor-assisted startup, and embedded configuration methods. Exact configuration memory interface requirements, bank voltage limits, differential I/O standards, and power-management settings should be selected from the manufacturer pinout and datasheet tables for the specific board design.

Typical applications include industrial automation and PLC control, motor-control and real-time sensor fusion, camera and image-processing pipelines, embedded vision, communications infrastructure, and high-performance instrumentation. The 101,440-cell device can host parallel control logic, video pipelines, and DSP algorithms in one programmable device, reducing the need for separate external devices when timing and data paths are tightly coupled.

PCB design should prioritize the manufacturer power, ground, decoupling, configuration, and pinout guidance for FTBGA-256. Use a multilayer board with short return paths for supply rails, place decoupling and configuration components close to their associated balls, and maintain the required manufacturing and assembly allowances. Verify thermal performance under the expected switching activity rather than relying only on average device power.

This product page combines the exact device identity, manufacturer architecture information, package and pinout resources, price records, drop-in same-package options, and application-specific design guidance. It also identifies where speed-grade, temperature-grade, and package differences matter during replacement planning.

এর জন্য ড্রপ-ইন বিকল্প XC7A100T-2FTG256I — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible XC7A100T-2FTG256I (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Temperature Grade, Logic Cells, Mounting Type, Device Type.

AMD
Package: 256-ball FTBGA (FTG256)
Temperature Grade: Commercial (C): 0 C to +85 C
Logic Cells: 101,440
এর সাথে তুলনা করুন XC7A100T-2FTG256I →
AMD
Package: 256-ball FT BGA
Temperature Grade: Industrial
এর সাথে তুলনা করুন XC7A100T-2FTG256I →
AMD
Package: 256-FTBGA
Temperature Grade: Industrial
Device Type: Artix-7 Field Programmable Gate Array (FPGA)
এর সাথে তুলনা করুন XC7A100T-2FTG256I →
AMD
Package: 256-pin FTG256 package
Temperature Grade: Commercial, 0°C to +85°C
Logic Cells: 101,440 logic cells
এর সাথে তুলনা করুন XC7A100T-2FTG256I →

XC7A100T-1FTG256I

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
AMD
📦 FTBGA-256
Artix-7 · 101,440 cells · 240 slices · 4,860 Kb · 8 GTP transceivers · 170 I/O · 28 nm · 1 V

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

XC7A100T-2FTG256C

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
AMD
📦 FTBGA-256
Artix-7 Field-Programmable Gate Array (FPGA) · 101,440 logic cells · 170 I/O · 240 DSP48E1 slices · 256-pin FTG256 package · FTBGA-256 / 256-LBGA · 17 mm x 17 mm · 28 nm

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

XC7A100T-1FTG256C

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
AMD
📦 FTBGA-256
Artix-7 · 101,440 · 4,976,640 · 4,860 · 240 · -1 · Commercial (C): 0 C to +85 C · 256-ball FTBGA (FTG256)

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

XC7A100T-1FTG256E

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 FTBGA-256
Speed grade changes from -2 to -1 and temperature designation changes from I to E while retaining the FTBGA-256 footprint.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

XC7A100T-2FTG256E

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 FTBGA-256
Temperature designation changes from industrial I to E while the -2 speed grade and FTBGA-256 footprint remain unchanged.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

XC7A100T-2FTG256I সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Device Type Artix-7 field-programmable gate array (FPGA)
Logic Cells 101,440 cells
I/O Pins 170 pins
DSP Slices 628 slices
Block RAM 4,976,640 bits
Process Technology 28 nm
প্যাকেজ FTBGA-256
Speed Grade -2
Temperature Grade Industrial, -40°C to +100°C
মাউন্টিং টাইপ Surface mount
RoHS স্ট্যাটাস Compliant
অপারেটিং তাপমাত্রা -40°C to +100°C
লাইফসাইকেল স্ট্যাটাস Active

XC7A100T-2FTG256I ftbga-256 পিন কনফিগারেশন গাইড

XC7A100T-2FTG256I (ftbga-256 প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

XC7A100T-2FTG256I-এর জন্য ftbga-256 প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি XC7A100T-2FTG256I.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

XC7A100T-2FTG256I এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Automation and PLC Control, Motor Control and Real-Time Sensor Fusion, Video and Image-Processing Pipelines, Industrial Vision and Camera Interfaces, Communications and Network Interface Equipment, High-Performance Instrumentation.

🏭

Industrial Automation and PLC Control

The XC7A100T-2FTG256I fits industrial automation controllers that combine sequential logic, parallel data acquisition, communication interfaces, and real-time control in one FPGA. Its 101,440 logic cells provide substantial implementation capacity, while 170 I/O pins support digital control, status, and communication connectivity. The 628 DSP slices can accelerate filtering or signal-processing tasks without relying on a separate accelerator. The -2 speed grade supports demanding control timing, and the industrial -40°C to +100°C range aligns with factory environments. Place the device beside the controller I/O circuitry, use the manufacturer power and decoupling guidance, and validate timing for motor-control, interlock, and sensor-conditioning paths.

⚡

Motor Control and Real-Time Sensor Fusion

The XC7A100T-2FTG256I is suitable for motor-control systems that acquire sensors, perform digital filtering, calculate control variables, and update outputs within deterministic timing constraints. Its 628 DSP slices are useful for multiplication-intensive filtering, transformations, and control calculations, while 4,976,640 bits of block RAM support buffered sensor data and multi-channel processing. The -2 grade is appropriate when the control loop requires higher fabric performance than the -1 grade. Designers should partition real-time paths carefully, constrain all clocks and I/O, and use the official FTBGA-256 pinout to place power, configuration, and high-speed interface balls.

📺

Video and Image-Processing Pipelines

The XC7A100T-2FTG256I can implement parallel video or image-processing pipelines where multiple stages operate concurrently across sensors, memory interfaces, and display or network links. Its 101,440 logic cells support control and data-path logic, while 628 DSP slices accelerate multiply-accumulate operations commonly used in filtering and pixel processing. The 170 I/O pins provide substantial connectivity for source and destination interfaces. The -2 performance grade can improve timing margin in wide parallel datapaths. Board implementation should use short point-to-point routing for high-speed signals, controlled-length routing where required, and the manufacturer pinout files to identify compatible I/O banks and memory groups.

🎥

Industrial Vision and Camera Interfaces

The XC7A100T-2FTG256I fits industrial camera systems that require deterministic image acquisition, preprocessing, exposure control, and communication with a host processor. Parallel logic resources can connect image sensors and implement timing generators, while DSP slices support filters, color conversion, and thresholding at line or pixel level. Its 170 I/O pins allow several sensors or control interfaces to coexist when electrical standards and I/O-bank assignments permit. The industrial temperature designation supports equipment operating from -40°C to +100°C. Use the AMD package pinout files to confirm bank-compatible pins, and isolate high-speed sensor routing from power and configuration circuitry to reduce signal-integrity risk.

🌐

Communications and Network Interface Equipment

The XC7A100T-2FTG256I is suitable for protocol processing, packet handling, data framing, and interface adaptation in industrial communications equipment. Its 101,440 logic cells allow multiple parallel processing lanes, and its 4,976,640 bits of block RAM provide on-chip buffering for burst traffic and packet queues. The 628 DSP slices can support filtering or modulation-related arithmetic, while the -2 speed grade offers additional timing headroom for demanding interfaces. Designers should select bank-compatible I/O standards, define precise timing constraints, and use the package documentation to route memory and high-speed interfaces. Configuration storage and startup behavior must also be verified against the selected board architecture.

🔧

High-Performance Instrumentation

The XC7A100T-2FTG256I can serve as the digital core of test and measurement equipment requiring simultaneous acquisition, control, calibration, and data processing. The large logic-cell count supports instrument control logic and protocol engines, while DSP slices accelerate filtering, modulation, demodulation, and numerical operations. Its 170 I/O pins allow the FPGA to interface with converters, memories, clocks, and communication circuitry while the -2 grade supports demanding timing. For dependable results, specify all clock relationships, use synchronous interfaces where possible, and design decoupling around the manufacturer power guidance. Verify the analog interface separately because FPGA timing performance does not determine converter accuracy or front-end noise.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

What are the key specifications of XC7A100T-2FTG256I that engineers should know?
The AMD XC7A100T-2FTG256I is an Artix-7 FPGA containing 101,440 logic cells, 170 I/O pins, 628 DSP slices, and 4,976,640 bits of block RAM. It uses 28 nm process technology and is supplied in an FTBGA-256 package. The -2 grade is the performance designation, and the I suffix denotes the industrial temperature option covering -40°C to +100°C.
What is the operating temperature range of XC7A100T-2FTG256I?
The XC7A100T-2FTG256I is specified for an industrial temperature range of -40°C to +100°C. The I suffix identifies this industrial temperature option. Designers should still verify the exact voltage, speed, and package combinations in the manufacturer datasheet because electrical limits and performance guarantees can vary with operating conditions.
Where can I download the XC7A100T-2FTG256I datasheet PDF?
The XC7A100T-2FTG256I datasheet PDF is available from the manufacturer Artix-7 documentation link recorded for this device. It contains the Artix-7 DC and AC switching characteristics, while the official UG475 package specification contains detailed FTBGA-256 pin definitions, power and ground locations, and memory groupings. Use both documents when assigning PCB balls and configuring I/O banks.
Where can I find the XC7A100T-2FTG256I pinout?
The official Artix-7 package device pinout files provide the XC7A100T-2FTG256I ball assignments in ASCII TXT and CSV formats. They are intended to be used with UG475, which defines package pinouts, I/O banks, power and ground placement, and memory groupings. Assign each PCB connection from these files rather than inferring BGA positions visually.
Is XC7A100T-2FTG256I the same as XC7A100T-1FTG256I?
No. XC7A100T-2FTG256I and XC7A100T-1FTG256I use the same Artix-7 device family and FTBGA-256 package, but their speed grades differ. The -2 part is the faster grade, while the -1 part uses the lower speed designation. They can serve as same-footprint design alternatives when the required timing performance and regeneration checks meet the system specification.
Can XC7A100T-1FTG256I replace XC7A100T-2FTG256I?
XC7A100T-1FTG256I is a same-footprint alternative because it retains the XC7A100T device and FTBGA-256 package, but it carries the lower -1 speed grade instead of -2. The replacement is appropriate only after checking every clock domain, I/O timing path, and external interface against the lower performance target and recompiling the bitstream for the selected device.
What can replace XC7A100T-2FTG256I without changing the PCB footprint?
The same-package replacement choices are the XC7A100T FTG256 speed- and temperature-grade variants, including XC7A100T-1FTG256I and XC7A100T-2FTG256C. They retain the Artix-7 XC7A100T identity and FTBGA-256 footprint, but the speed grade, temperature rating, and supported operating conditions differ. Verify timing, temperature, lifecycle, and configuration requirements before substitution.
Where can I buy XC7A100T-2FTG256I and check its price?
Use the Request a Quote form on this page to request the current XC7A100T-2FTG256I unit price, stock position, and lead time. Quote requests are the appropriate commercial path because FPGA pricing and availability can change with market conditions and order quantity. The part identity to quote is the complete suffix XC7A100T-2FTG256I, including the -2 speed grade and FTG256 package.
Is XC7A100T-2FTG256I in stock?
The current stock position should be confirmed through the Request a Quote form on this page. Inventory for the exact XC7A100T-2FTG256I ordering code can change independently of the broader XC7A100T family because speed grade, temperature grade, and package suffix define separate orderable devices. Include the required quantity and delivery target with the request.
What is the lead time for XC7A100T-2FTG256I?
The current lead time for XC7A100T-2FTG256I should be requested through the Request a Quote form on this page. Include production quantity, target delivery date, and whether unprogrammed devices or programmed devices are required. A complete order code and a clear schedule allow the supplier to confirm allocation without confusing this industrial -2-grade FTBGA-256 device with other XC7A100T package options.
XC7A100T-2FTG256I vs XC7A100T-2FGG484I: which is better for a new design?
XC7A100T-2FGG484I is not a footprint-compatible replacement for XC7A100T-2FTG256I because it uses a different 484-ball package. The choice depends on board mechanics, routing density, I/O count, and thermal requirements rather than being an interchangeable substitution. XC7A100T-2FTG256I is appropriate when the board is designed specifically around its 256-ball FTBGA footprint and 170 I/O.
When should I choose XC7A100T-2FTG256I over XC7A100T-1FTG256I?
Choose the -2 device when the design has demanding clocking, high-speed interfaces, or timing paths that require the higher Artix-7 performance grade. Choose XC7A100T-1FTG256I when its lower speed grade meets every timing constraint and reducing the performance designation is beneficial. In either case, confirm the design against the timing and power characteristics of the selected grade.
Is XC7A100T-2FTG256I suitable for industrial automation and motor control?
The XC7A100T-2FTG256I is suitable for industrial automation when its 101,440 logic cells, 628 DSP slices, 170 I/O pins, and industrial -40°C to +100°C temperature range fit the design. It can combine real-time control, sensor processing, communications, and safety-adjacent logic in one device. Validation must still include the required isolation, protection, environmental, and functional-safety system requirements.
What tools are used to design XC7A100T-2FTG256I systems?
AMD Vivado Design Suite is the principal FPGA design environment for Artix-7 devices, and the manufacturer documentation also identifies ISE Design Suite speed specifications as a reference point for supported speed grades. Engineers use Vivado for synthesis, implementation, timing analysis, constraint definition, bitstream generation, and hardware programming. The exact installed tool release should match the device support and security requirements of the project.
What is the best AMD equivalent for XC7A100T-2FTG256I?
The closest AMD same-package alternatives are other XC7A100T FTG256 grade variants, such as XC7A100T-1FTG256I. These retain the Artix-7 device identity, 101,440-cell architecture, and FTBGA-256 footprint, while changing speed or temperature options. A cross-brand equivalent cannot be treated as a guaranteed drop-in replacement because FPGA configuration, voltage standards, migration support, and pin behavior must be independently verified.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা XC7A100T-2FTG256I — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose XC7A100T-2FTG256I when the design requires the -2 Artix-7 performance grade, industrial operation from -40°C to +100°C, and the 256-ball FTG256 footprint. Its 101,440 logic cells, 628 DSP slices, and 4,976,640 bits of block RAM suit parallel control, image processing, communications, and instrumentation. Select XC7A100T-1FTG256I when the -1 speed grade passes every timing constraint and the lower grade is preferred. Select XC7A100T-2FTG256C only when commercial-temperature operation is acceptable. Choose the E suffix when its temperature characterization matches the system requirement better than the industrial I grade. In every case, verify package pinout, bank voltage, configuration behavior, lifecycle status, and timing with the manufacturer documentation. Different XC7A100T packages such as FGG484 or CSG324 require a PCB-level migration and are not drop-in replacements.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য XC7A100T-1FTG256I XC7A100T-2FTG256C XC7A100T-1FTG256C XC7A100T-1FTG256E XC7A100T-2FTG256E
Brand AMD AMD AMD AMD AMD AMD
Package FTBGA-256 FTBGA-256 - same FTBGA-256 - same FTBGA-256 - same FTBGA-256 - same FTBGA-256 - same
Device Family Artix-7 Artix-7 Artix-7 Artix-7 Artix-7 Artix-7
Logic Cells 101,440 cells 101,440 cells 101,440 cells 101,440 cells 101,440 cells 101,440 cells
I/O Pins 170 pins 170 pins 170 pins 170 pins 170 pins 170 pins
DSP Slices 628 slices 628 slices 628 slices 628 slices 628 slices 628 slices
Block RAM 4,976,640 bits 4,976,640 bits 4,976,640 bits 4,976,640 bits 4,976,640 bits 4,976,640 bits
Process Technology 28 nm 28 nm 28 nm 28 nm 28 nm 28 nm
Speed Grade -2 -1 -2 -1 -1 -2
Temperature Grade Industrial I, -40°C to +100°C Industrial I, -40°C to +100°C Commercial C Commercial C Extended E Extended E

মূল পার্থক্যসমূহ

  • Higher speed grade within the same Artix-7 architecture (বনামXC7A100T-1FTG256I)
  • Industrial temperature coverage (বনামXC7A100T-2FTG256C)
  • Large integrated processing resource set (বনামXC7A100T-1FTG256C)
  • Same-package migration without changing the PCB footprint (বনামXC7A100T-2FTG256E)

ডিজাইন নোট

Use the official Artix-7 package device pinout files and UG475 when assigning every FTBGA-256 connection. Confirm ball numbers, I/O-bank boundaries, power and ground locations, and memory groupings directly from the package documentation. Do not infer the pinout from a visual BGA layout because configuration, dedicated pins, and bank-specific power requirements determine whether a PCB design functions correctly.

Implement the FTBGA-256 power architecture according to the manufacturer power guide, including all required rails, decoupling locations, and plane connections. Place decoupling capacitors close to their associated device balls and keep high-current return paths continuous. Configuration pins must be held in their required states during startup, so the reset, configuration, and supply sequencing network should be reviewed as one circuit.

Preserve signal-integrity margins for high-speed interfaces, external memory, and configuration paths. Use short, direct routes where possible, provide continuous reference planes, and observe the manufacturer constraints for each I/O standard and bank voltage. Because an FTBGA-256 assembly has limited routing escape options, perform stackup, escape-routing, and assembly reviews before releasing the PCB layout.

Evaluate junction temperature under the expected FPGA switching activity, board construction, enclosure, and ambient temperature. The device's 28 nm process provides a strong performance-per-watt foundation, but actual system dissipation depends on utilization, clocking, I/O activity, and grade. Use the manufacturer power estimator and thermal guidance for the exact design, and verify operation across -40°C to +100°C for the industrial suffix.

Do not treat another XC7A100T package as a drop-in replacement. FGG484, CSG324, and FGG676 devices use different package dimensions, ball assignments, and I/O arrangements. For FTG256 alternatives, separately check speed grade, temperature suffix, timing margins, lifecycle status, and the availability of a valid bitstream or recompile for the selected ordering code.

কমপ্লায়েন্স তথ্য

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

RoHS compliance is listed for the exact device. No separate REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was established for this ordering code.

ডেটা যাচাই করা হয়েছে: 2026-11-18 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

xc7a100t 2ftg256i xc7a100t 2ftg256i datasheet xc7a100t datasheet xc7a100t fpga xc7a100t 2fgg484i xc7a100t 2csg324i xc7a100t 2fgg676i XC7A100T-2FTG256I pinout XC7A100T-2FTG256I replacement XC7A100T-2FTG256I vs XC7A100T-1FTG256I XC7A100T-2FTG256I FTBGA-256 XC7A100T-2FTG256I price XC7A100T-2FTG256I stock AMD XC7A100T-2FTG256I XC7A100T industrial automation FPGA

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

AMD Xilinx XC7A100T-2FTG256I XC7A100T-1FTG256I XC7A100T-2FTG256C XC7A100T-1FTG256C XC7A100T-1FTG256E XC7A100T-2FTG256E Artix-7 FPGA field-programmable gate array programmable logic device semiconductor logic cell DSP slice block RAM 28 nm process technology FTBGA-256 BGA package surface-mount package industrial temperature grade Vivado Design Suite UG475 I/O bank configuration interface
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন