XC7A100T-2FTG256I - 101440 Logic Cell Artix-7 FPGA | AMD
MPN: XC7A100T-2FTG256I ✓ 啟用中XC7A100T-2FTG256I 概覽
An FPGA is a programmable semiconductor containing configurable logic blocks, programmable interconnect, block RAM, and digital signal-processing resources. Within the semiconductor hierarchy, the Artix-7 family sits below larger FPGA families and provides a balance of logic density, performance, cost, and power efficiency. The XC7A100T device family is appropriate when designers need more parallelism and dedicated processing resources than a small microcontroller or discrete logic implementation can provide.
The XC7A100T-2FTG256I provides 101,440 logic cells, 170 I/O pins, 628 DSP slices, 4,976,640 bits of block RAM, and 170 maximum I/O according to the manufacturer Artix-7 documentation. Its 28 nm process supports high performance per watt while remaining oriented toward cost-sensitive applications. The FTBGA-256 package provides a compact surface-mount option for high-density PCB layouts, although its fine-pitch ball array requires careful escape-routing and assembly planning.
The -2 suffix identifies the performance grade, while FTG256 identifies the package configuration and I denotes the industrial temperature option. The Artix-7 architecture supports configuration from external flash, processor-assisted startup, and embedded configuration methods. Exact configuration memory interface requirements, bank voltage limits, differential I/O standards, and power-management settings should be selected from the manufacturer pinout and datasheet tables for the specific board design.
Typical applications include industrial automation and PLC control, motor-control and real-time sensor fusion, camera and image-processing pipelines, embedded vision, communications infrastructure, and high-performance instrumentation. The 101,440-cell device can host parallel control logic, video pipelines, and DSP algorithms in one programmable device, reducing the need for separate external devices when timing and data paths are tightly coupled.
PCB design should prioritize the manufacturer power, ground, decoupling, configuration, and pinout guidance for FTBGA-256. Use a multilayer board with short return paths for supply rails, place decoupling and configuration components close to their associated balls, and maintain the required manufacturing and assembly allowances. Verify thermal performance under the expected switching activity rather than relying only on average device power.
This product page combines the exact device identity, manufacturer architecture information, package and pinout resources, price records, drop-in same-package options, and application-specific design guidance. It also identifies where speed-grade, temperature-grade, and package differences matter during replacement planning.
直接替換替代品,適用於 XC7A100T-2FTG256I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC7A100T-2FTG256I (相同外形與佔位) — 差異在於 Package, Temperature Grade, Logic Cells, Mounting Type, Device Type.
XC7A100T-1FTG256I
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XC7A100T-2FTG256C
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XC7A100T-1FTG256C
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XC7A100T-1FTG256E
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC7A100T-2FTG256E
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC7A100T-2FTG256I 最大額定值與電氣特性
| Device Type | Artix-7 field-programmable gate array (FPGA) |
| Logic Cells | 101,440 cells |
| I/O Pins | 170 pins |
| DSP Slices | 628 slices |
| Block RAM | 4,976,640 bits |
| Process Technology | 28 nm |
| 封裝 | FTBGA-256 |
| Speed Grade | -2 |
| Temperature Grade | Industrial, -40°C to +100°C |
| 安裝類型 | Surface mount |
| RoHS 狀態 | Compliant |
| 工作溫度 | -40°C to +100°C |
| 生命週期狀態 | Active |
XC7A100T-2FTG256I ftbga-256 腳位配置指南
XC7A100T-2FTG256I(ftbga-256 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC7A100T-2FTG256I.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC7A100T-2FTG256I 適用於 6 應用s: Industrial Automation and PLC Control, Motor Control and Real-Time Sensor Fusion, Video and Image-Processing Pipelines, Industrial Vision and Camera Interfaces, Communications and Network Interface Equipment, High-Performance Instrumentation.
Industrial Automation and PLC Control
The XC7A100T-2FTG256I fits industrial automation controllers that combine sequential logic, parallel data acquisition, communication interfaces, and real-time control in one FPGA. Its 101,440 logic cells provide substantial implementation capacity, while 170 I/O pins support digital control, status, and communication connectivity. The 628 DSP slices can accelerate filtering or signal-processing tasks without relying on a separate accelerator. The -2 speed grade supports demanding control timing, and the industrial -40°C to +100°C range aligns with factory environments. Place the device beside the controller I/O circuitry, use the manufacturer power and decoupling guidance, and validate timing for motor-control, interlock, and sensor-conditioning paths.
推薦
Motor Control and Real-Time Sensor Fusion
The XC7A100T-2FTG256I is suitable for motor-control systems that acquire sensors, perform digital filtering, calculate control variables, and update outputs within deterministic timing constraints. Its 628 DSP slices are useful for multiplication-intensive filtering, transformations, and control calculations, while 4,976,640 bits of block RAM support buffered sensor data and multi-channel processing. The -2 grade is appropriate when the control loop requires higher fabric performance than the -1 grade. Designers should partition real-time paths carefully, constrain all clocks and I/O, and use the official FTBGA-256 pinout to place power, configuration, and high-speed interface balls.
推薦
Video and Image-Processing Pipelines
The XC7A100T-2FTG256I can implement parallel video or image-processing pipelines where multiple stages operate concurrently across sensors, memory interfaces, and display or network links. Its 101,440 logic cells support control and data-path logic, while 628 DSP slices accelerate multiply-accumulate operations commonly used in filtering and pixel processing. The 170 I/O pins provide substantial connectivity for source and destination interfaces. The -2 performance grade can improve timing margin in wide parallel datapaths. Board implementation should use short point-to-point routing for high-speed signals, controlled-length routing where required, and the manufacturer pinout files to identify compatible I/O banks and memory groups.
推薦
Industrial Vision and Camera Interfaces
The XC7A100T-2FTG256I fits industrial camera systems that require deterministic image acquisition, preprocessing, exposure control, and communication with a host processor. Parallel logic resources can connect image sensors and implement timing generators, while DSP slices support filters, color conversion, and thresholding at line or pixel level. Its 170 I/O pins allow several sensors or control interfaces to coexist when electrical standards and I/O-bank assignments permit. The industrial temperature designation supports equipment operating from -40°C to +100°C. Use the AMD package pinout files to confirm bank-compatible pins, and isolate high-speed sensor routing from power and configuration circuitry to reduce signal-integrity risk.
推薦
Communications and Network Interface Equipment
The XC7A100T-2FTG256I is suitable for protocol processing, packet handling, data framing, and interface adaptation in industrial communications equipment. Its 101,440 logic cells allow multiple parallel processing lanes, and its 4,976,640 bits of block RAM provide on-chip buffering for burst traffic and packet queues. The 628 DSP slices can support filtering or modulation-related arithmetic, while the -2 speed grade offers additional timing headroom for demanding interfaces. Designers should select bank-compatible I/O standards, define precise timing constraints, and use the package documentation to route memory and high-speed interfaces. Configuration storage and startup behavior must also be verified against the selected board architecture.
推薦
High-Performance Instrumentation
The XC7A100T-2FTG256I can serve as the digital core of test and measurement equipment requiring simultaneous acquisition, control, calibration, and data processing. The large logic-cell count supports instrument control logic and protocol engines, while DSP slices accelerate filtering, modulation, demodulation, and numerical operations. Its 170 I/O pins allow the FPGA to interface with converters, memories, clocks, and communication circuitry while the -2 grade supports demanding timing. For dependable results, specify all clock relationships, use synchronous interfaces where possible, and design decoupling around the manufacturer power guidance. Verify the analog interface separately because FPGA timing performance does not determine converter accuracy or front-end noise.
推薦
推薦產品摘要
工程參考資料,適用於 XC7A100T-2FTG256I — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC7A100T-1FTG256I | XC7A100T-2FTG256C | XC7A100T-1FTG256C | XC7A100T-1FTG256E | XC7A100T-2FTG256E |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | FTBGA-256 | FTBGA-256 - same | FTBGA-256 - same | FTBGA-256 - same | FTBGA-256 - same | FTBGA-256 - same |
| Device Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Logic Cells | 101,440 cells | 101,440 cells | 101,440 cells | 101,440 cells | 101,440 cells | 101,440 cells |
| I/O Pins | 170 pins | 170 pins | 170 pins | 170 pins | 170 pins | 170 pins |
| DSP Slices | 628 slices | 628 slices | 628 slices | 628 slices | 628 slices | 628 slices |
| Block RAM | 4,976,640 bits | 4,976,640 bits | 4,976,640 bits | 4,976,640 bits | 4,976,640 bits | 4,976,640 bits |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Speed Grade | -2 | -1 | -2 | -1 | -1 | -2 |
| Temperature Grade | Industrial I, -40°C to +100°C | Industrial I, -40°C to +100°C | Commercial C | Commercial C | Extended E | Extended E |
主要差異化特點
- Higher speed grade within the same Artix-7 architecture (對比XC7A100T-1FTG256I)
- Industrial temperature coverage (對比XC7A100T-2FTG256C)
- Large integrated processing resource set (對比XC7A100T-1FTG256C)
- Same-package migration without changing the PCB footprint (對比XC7A100T-2FTG256E)
設計說明
Use the official Artix-7 package device pinout files and UG475 when assigning every FTBGA-256 connection. Confirm ball numbers, I/O-bank boundaries, power and ground locations, and memory groupings directly from the package documentation. Do not infer the pinout from a visual BGA layout because configuration, dedicated pins, and bank-specific power requirements determine whether a PCB design functions correctly.
Implement the FTBGA-256 power architecture according to the manufacturer power guide, including all required rails, decoupling locations, and plane connections. Place decoupling capacitors close to their associated device balls and keep high-current return paths continuous. Configuration pins must be held in their required states during startup, so the reset, configuration, and supply sequencing network should be reviewed as one circuit.
Preserve signal-integrity margins for high-speed interfaces, external memory, and configuration paths. Use short, direct routes where possible, provide continuous reference planes, and observe the manufacturer constraints for each I/O standard and bank voltage. Because an FTBGA-256 assembly has limited routing escape options, perform stackup, escape-routing, and assembly reviews before releasing the PCB layout.
Evaluate junction temperature under the expected FPGA switching activity, board construction, enclosure, and ambient temperature. The device's 28 nm process provides a strong performance-per-watt foundation, but actual system dissipation depends on utilization, clocking, I/O activity, and grade. Use the manufacturer power estimator and thermal guidance for the exact design, and verify operation across -40°C to +100°C for the industrial suffix.
Do not treat another XC7A100T package as a drop-in replacement. FGG484, CSG324, and FGG676 devices use different package dimensions, ball assignments, and I/O arrangements. For FTG256 alternatives, separately check speed grade, temperature suffix, timing margins, lifecycle status, and the availability of a valid bitstream or recompile for the selected ordering code.
合規資訊
RoHS compliance is listed for the exact device. No separate REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was established for this ordering code.