XC7A100T-2FTG256I - 101440 Logic Cell Artix-7 FPGA | AMD
料号: XC7A100T-2FTG256I ✓ 量产中XC7A100T-2FTG256I 概述
An FPGA is a programmable semiconductor containing configurable logic blocks, programmable interconnect, block RAM, and digital signal-processing resources. Within the semiconductor hierarchy, the Artix-7 family sits below larger FPGA families and provides a balance of logic density, performance, cost, and power efficiency. The XC7A100T device family is appropriate when designers need more parallelism and dedicated processing resources than a small microcontroller or discrete logic implementation can provide.
The XC7A100T-2FTG256I provides 101,440 logic cells, 170 I/O pins, 628 DSP slices, 4,976,640 bits of block RAM, and 170 maximum I/O according to the manufacturer Artix-7 documentation. Its 28 nm process supports high performance per watt while remaining oriented toward cost-sensitive applications. The FTBGA-256 package provides a compact surface-mount option for high-density PCB layouts, although its fine-pitch ball array requires careful escape-routing and assembly planning.
The -2 suffix identifies the performance grade, while FTG256 identifies the package configuration and I denotes the industrial temperature option. The Artix-7 architecture supports configuration from external flash, processor-assisted startup, and embedded configuration methods. Exact configuration memory interface requirements, bank voltage limits, differential I/O standards, and power-management settings should be selected from the manufacturer pinout and datasheet tables for the specific board design.
Typical applications include industrial automation and PLC control, motor-control and real-time sensor fusion, camera and image-processing pipelines, embedded vision, communications infrastructure, and high-performance instrumentation. The 101,440-cell device can host parallel control logic, video pipelines, and DSP algorithms in one programmable device, reducing the need for separate external devices when timing and data paths are tightly coupled.
PCB design should prioritize the manufacturer power, ground, decoupling, configuration, and pinout guidance for FTBGA-256. Use a multilayer board with short return paths for supply rails, place decoupling and configuration components close to their associated balls, and maintain the required manufacturing and assembly allowances. Verify thermal performance under the expected switching activity rather than relying only on average device power.
This product page combines the exact device identity, manufacturer architecture information, package and pinout resources, price records, drop-in same-package options, and application-specific design guidance. It also identifies where speed-grade, temperature-grade, and package differences matter during replacement planning.
直接替换替代料: XC7A100T-2FTG256I ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: XC7A100T-2FTG256I (相同外形与封装尺寸) ——差异在于 Package, Temperature Grade, Logic Cells, Mounting Type, Device Type.
XC7A100T-1FTG256I
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →XC7A100T-2FTG256C
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →XC7A100T-1FTG256C
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →XC7A100T-1FTG256E
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
XC7A100T-2FTG256E
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
XC7A100T-2FTG256I 最大额定值与电气特性
| Device Type | Artix-7 field-programmable gate array (FPGA) |
| Logic Cells | 101,440 cells |
| I/O Pins | 170 pins |
| DSP Slices | 628 slices |
| Block RAM | 4,976,640 bits |
| Process Technology | 28 nm |
| 封装 | FTBGA-256 |
| Speed Grade | -2 |
| Temperature Grade | Industrial, -40°C to +100°C |
| 安装类型 | Surface mount |
| RoHS 状态 | Compliant |
| 工作温度 | -40°C to +100°C |
| 生命周期状态 | Active |
XC7A100T-2FTG256I ftbga-256 引脚配置指南
XC7A100T-2FTG256I(ftbga-256 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: XC7A100T-2FTG256I.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XC7A100T-2FTG256I 适用于 6 应用s: Industrial Automation and PLC Control, Motor Control and Real-Time Sensor Fusion, Video and Image-Processing Pipelines, Industrial Vision and Camera Interfaces, Communications and Network Interface Equipment, High-Performance Instrumentation.
Industrial Automation and PLC Control
The XC7A100T-2FTG256I fits industrial automation controllers that combine sequential logic, parallel data acquisition, communication interfaces, and real-time control in one FPGA. Its 101,440 logic cells provide substantial implementation capacity, while 170 I/O pins support digital control, status, and communication connectivity. The 628 DSP slices can accelerate filtering or signal-processing tasks without relying on a separate accelerator. The -2 speed grade supports demanding control timing, and the industrial -40°C to +100°C range aligns with factory environments. Place the device beside the controller I/O circuitry, use the manufacturer power and decoupling guidance, and validate timing for motor-control, interlock, and sensor-conditioning paths.
推荐
Motor Control and Real-Time Sensor Fusion
The XC7A100T-2FTG256I is suitable for motor-control systems that acquire sensors, perform digital filtering, calculate control variables, and update outputs within deterministic timing constraints. Its 628 DSP slices are useful for multiplication-intensive filtering, transformations, and control calculations, while 4,976,640 bits of block RAM support buffered sensor data and multi-channel processing. The -2 grade is appropriate when the control loop requires higher fabric performance than the -1 grade. Designers should partition real-time paths carefully, constrain all clocks and I/O, and use the official FTBGA-256 pinout to place power, configuration, and high-speed interface balls.
推荐
Video and Image-Processing Pipelines
The XC7A100T-2FTG256I can implement parallel video or image-processing pipelines where multiple stages operate concurrently across sensors, memory interfaces, and display or network links. Its 101,440 logic cells support control and data-path logic, while 628 DSP slices accelerate multiply-accumulate operations commonly used in filtering and pixel processing. The 170 I/O pins provide substantial connectivity for source and destination interfaces. The -2 performance grade can improve timing margin in wide parallel datapaths. Board implementation should use short point-to-point routing for high-speed signals, controlled-length routing where required, and the manufacturer pinout files to identify compatible I/O banks and memory groups.
推荐
Industrial Vision and Camera Interfaces
The XC7A100T-2FTG256I fits industrial camera systems that require deterministic image acquisition, preprocessing, exposure control, and communication with a host processor. Parallel logic resources can connect image sensors and implement timing generators, while DSP slices support filters, color conversion, and thresholding at line or pixel level. Its 170 I/O pins allow several sensors or control interfaces to coexist when electrical standards and I/O-bank assignments permit. The industrial temperature designation supports equipment operating from -40°C to +100°C. Use the AMD package pinout files to confirm bank-compatible pins, and isolate high-speed sensor routing from power and configuration circuitry to reduce signal-integrity risk.
推荐
Communications and Network Interface Equipment
The XC7A100T-2FTG256I is suitable for protocol processing, packet handling, data framing, and interface adaptation in industrial communications equipment. Its 101,440 logic cells allow multiple parallel processing lanes, and its 4,976,640 bits of block RAM provide on-chip buffering for burst traffic and packet queues. The 628 DSP slices can support filtering or modulation-related arithmetic, while the -2 speed grade offers additional timing headroom for demanding interfaces. Designers should select bank-compatible I/O standards, define precise timing constraints, and use the package documentation to route memory and high-speed interfaces. Configuration storage and startup behavior must also be verified against the selected board architecture.
推荐
High-Performance Instrumentation
The XC7A100T-2FTG256I can serve as the digital core of test and measurement equipment requiring simultaneous acquisition, control, calibration, and data processing. The large logic-cell count supports instrument control logic and protocol engines, while DSP slices accelerate filtering, modulation, demodulation, and numerical operations. Its 170 I/O pins allow the FPGA to interface with converters, memories, clocks, and communication circuitry while the -2 grade supports demanding timing. For dependable results, specify all clock relationships, use synchronous interfaces where possible, and design decoupling around the manufacturer power guidance. Verify the analog interface separately because FPGA timing performance does not determine converter accuracy or front-end noise.
推荐
推荐产品汇总
工程参考数据: XC7A100T-2FTG256I ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | XC7A100T-1FTG256I | XC7A100T-2FTG256C | XC7A100T-1FTG256C | XC7A100T-1FTG256E | XC7A100T-2FTG256E |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | FTBGA-256 | FTBGA-256 - same | FTBGA-256 - same | FTBGA-256 - same | FTBGA-256 - same | FTBGA-256 - same |
| Device Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Logic Cells | 101,440 cells | 101,440 cells | 101,440 cells | 101,440 cells | 101,440 cells | 101,440 cells |
| I/O Pins | 170 pins | 170 pins | 170 pins | 170 pins | 170 pins | 170 pins |
| DSP Slices | 628 slices | 628 slices | 628 slices | 628 slices | 628 slices | 628 slices |
| Block RAM | 4,976,640 bits | 4,976,640 bits | 4,976,640 bits | 4,976,640 bits | 4,976,640 bits | 4,976,640 bits |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Speed Grade | -2 | -1 | -2 | -1 | -1 | -2 |
| Temperature Grade | Industrial I, -40°C to +100°C | Industrial I, -40°C to +100°C | Commercial C | Commercial C | Extended E | Extended E |
关键差异点
- Higher speed grade within the same Artix-7 architecture (对比 XC7A100T-1FTG256I)
- Industrial temperature coverage (对比 XC7A100T-2FTG256C)
- Large integrated processing resource set (对比 XC7A100T-1FTG256C)
- Same-package migration without changing the PCB footprint (对比 XC7A100T-2FTG256E)
设计说明
Use the official Artix-7 package device pinout files and UG475 when assigning every FTBGA-256 connection. Confirm ball numbers, I/O-bank boundaries, power and ground locations, and memory groupings directly from the package documentation. Do not infer the pinout from a visual BGA layout because configuration, dedicated pins, and bank-specific power requirements determine whether a PCB design functions correctly.
Implement the FTBGA-256 power architecture according to the manufacturer power guide, including all required rails, decoupling locations, and plane connections. Place decoupling capacitors close to their associated device balls and keep high-current return paths continuous. Configuration pins must be held in their required states during startup, so the reset, configuration, and supply sequencing network should be reviewed as one circuit.
Preserve signal-integrity margins for high-speed interfaces, external memory, and configuration paths. Use short, direct routes where possible, provide continuous reference planes, and observe the manufacturer constraints for each I/O standard and bank voltage. Because an FTBGA-256 assembly has limited routing escape options, perform stackup, escape-routing, and assembly reviews before releasing the PCB layout.
Evaluate junction temperature under the expected FPGA switching activity, board construction, enclosure, and ambient temperature. The device's 28 nm process provides a strong performance-per-watt foundation, but actual system dissipation depends on utilization, clocking, I/O activity, and grade. Use the manufacturer power estimator and thermal guidance for the exact design, and verify operation across -40°C to +100°C for the industrial suffix.
Do not treat another XC7A100T package as a drop-in replacement. FGG484, CSG324, and FGG676 devices use different package dimensions, ball assignments, and I/O arrangements. For FTG256 alternatives, separately check speed grade, temperature suffix, timing margins, lifecycle status, and the availability of a valid bitstream or recompile for the selected ordering code.
合规信息
RoHS compliance is listed for the exact device. No separate REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was established for this ordering code.